| Проблема с 25 портом - как открить? [message #39366] |
Sat, 10 April 2010 09:52  |
Dreamland69
Messages: 3
Registered: July 2008
Location: Laatvia
|
Junior Member |
|
|
На Debian 5.0 с OpenVZ установленном по howtoforge "OpenVZ on Debian Lenny" HN непропускает 25 порт на VN. Если телнетитса с HN,то smtp на VH отвечает, если с внешной ип - не привета ни ответа. Все остальные порты пропускается (80, 22). Где копать, чтобы открить 25 порт (пророутить)?
01. Routing rules
On HN: ip rule list
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
ip route list table all
85.xxx.99.215 dev venet0 scope link
85.xxx.99.216 dev venet0 scope link
85.xxx.99.217 dev venet0 scope link
85.xxx.99.128/25 dev eth0 proto kernel scope link src 85.xxx.99.214
default via 85.xxx.99.129 dev eth0
broadcast 85.xxx.99.128 dev eth0 table local proto kernel scope link src 85.xxx.99.214
broadcast 127.255.255.255 dev lo table local proto kernel scope link src 127.0.0.1
local 85.xxx.99.214 dev eth0 table local proto kernel scope host src 85.xxx.99.214
broadcast 85.xxx.99.255 dev eth0 table local proto kernel scope link src 85.xxx.99.214
broadcast 127.0.0.0 dev lo table local proto kernel scope link src 127.0.0.1
local 127.0.0.1 dev lo table local proto kernel scope host src 127.0.0.1
local 127.0.0.0/8 dev lo table local proto kernel scope host src 127.0.0.1
fe80::/64 dev eth0 metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
unreachable default dev lo table unspec proto none metric -1 error -101 hoplimit 255
local ::1 via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 4294967295
local fe80::226:18ff:fecd:e83d via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 4294967295
ff00::/8 dev eth0 table local metric 256 mtu 1500 advmss 1440 hoplimit 4294967295
unreachable default dev lo table unspec proto none metric -1 error -101 hoplimit 255
On VH: ip rule list
-bash: ip: command not found
02. Netfilter configuration
On HN:
iptables -t nat -L && iptables -t filter -L && iptables -t mangle -L
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
On VH:
iptables -t nat -L && iptables -t filter -L && iptables -t mangle -L
iptables v1.3.6: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
[Updated on: Sat, 10 April 2010 11:58] Report message to a moderator |
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
