OpenVZ Forum


Home » General » Support » *SOLVED* OpenVZ: No driver for NIC RTL8111/8168B [solved]
Re: *SOLVED* OpenVZ: No driver for NIC RTL8111/8168B [solved] [message #39295 is a reply to message #25385] Sat, 03 April 2010 19:50 Go to previous messageGo to previous message
abdicar is currently offline  abdicar
Messages: 17
Registered: April 2010
Junior Member
Ok, Here we go.

BEFORE KERNEL UPDATE

Quote:
[root@22491 ~]# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdb3[1] sda3[0]
479998016 blocks [2/2] [UU]

md0 : active raid1 sdb1[1] sda1[0]
4192832 blocks [2/2] [UU]

unused devices: <none>
[root@22491 ~]# free -m
total used free shared buffers cached
Mem: 2010 336 1674 0 20 180
-/+ buffers/cache: 134 1875
Swap: 8189 0 8189
[root@22491 ~]# cat /etc/redhat-release
CentOS release 5.4 (Final)
[root@22491 ~]# uname -a
Linux 22491.server.local 2.6.18-164.15.1.el5PAE #1 SMP Wed Mar 17 12:14:29 EDT 2010 i686 i686 i386 GNU/Linux
[root@22491 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md0 3.9G 1.3G 2.5G 35% /
/dev/md1 444G 199M 421G 1% /vz
tmpfs 1006M 0 1006M 0% /dev/shm
[root@22491 ~]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
stepping : 10
cpu MHz : 1666.746
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 3333.49

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
stepping : 10
cpu MHz : 1666.746
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 3466.70

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
stepping : 10
cpu MHz : 1666.746
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 3333.19

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
stepping : 10
cpu MHz : 1666.746
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 3333.15

[root@22491 ~]#


Now the result from lspci -vv

Quote:
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: Intel Corporation Unknown device d615
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 58
Region 0: I/O ports at 1000 [size=256]
Region 2: Memory at e0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e0000000 (64-bit, prefetchable) [size=16K]
Expansion ROM at e0020000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
Address: 00000000fee03000 Data: 403a
Capabilities: [70] Express Endpoint IRQ 1
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <64us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-03


Ok, now I'm going to install the ovzkernel.i686 0:2.6.18-164.15.1.el5.028stab068.9 and ovzkernel-devel.i686 0:2.6.18-164.15.1.el5.028stab068.9.

Ok, both installed.

Quote:
[root@22491 ~]# rpm -qa | grep ovz
ovzkernel-2.6.18-164.15.1.el5.028stab068.9
ovzkernel-devel-2.6.18-164.15.1.el5.028stab068.9
[root@22491 ~]#


Now I edit the /boot/grub/grub.conf.

Quote:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,0)
# kernel /boot/vmlinuz-version ro root=/dev/md0
# initrd /boot/initrd-version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
hiddenmenu
title OpenVZ (2.6.18-164.15.1.el5.028stab068.9)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-164.15.1.el5.028stab068.9 ro root=/dev/md0
initrd /boot/initrd-2.6.18-164.15.1.el5.028stab068.9.img
title CentOS (2.6.18-164.15.1.el5PAE)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-164.15.1.el5PAE ro root=/dev/md0
initrd /boot/initrd-2.6.18-164.15.1.el5PAE.img
title CentOS (2.6.18-164.15.1.el5)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-164.15.1.el5 ro root=/dev/md0
initrd /boot/initrd-2.6.18-164.15.1.el5.img
title CentOS (2.6.18-164.el5PAE)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-164.el5PAE ro root=/dev/md0
initrd /boot/initrd-2.6.18-164.el5PAE.img
title CentOS-base (2.6.18-164.el5)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-164.el5 ro root=/dev/md0
initrd /boot/initrd-2.6.18-164.el5.img


Now sysctl edited.

Quote:
# Kernel sysctl configuration file for Red Hat Linux
#
# For binary values, 0 is disabled, 1 is enabled. See sysctl(Cool and
# sysctl.conf(5) for more details.

# Controls IP packet forwarding
net.ipv4.ip_forward = 1
net.ipv6.conf.default.forwarding = 1
net.ipv6.conf.all.forwarding = 1
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.all.rp_filter = 1

# Controls source route verification
net.ipv4.conf.default.rp_filter = 1

# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0

# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 1

# We do not want all our interfaces to send redirects
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0

# Controls whether core dumps will append the PID to the core filename
# Useful for debugging multi-threaded applications
kernel.core_uses_pid = 1

# Controls the use of TCP syncookies
net.ipv4.tcp_syncookies = 1

# Controls the maximum size of a message, in bytes
kernel.msgmnb = 65536

# Controls the default maxmimum size of a mesage queue
kernel.msgmax = 65536

# Controls the maximum shared segment size, in bytes
kernel.shmmax = 4294967295

# Controls the maximum number of shared memory segments, in pages
kernel.shmall = 268435456

/etc/sysconfig/selinux

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
SELINUX=disabled
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted - Only targeted network daemons are protected.
# strict - Full SELinux protection.
SELINUXTYPE=targeted

# SETLOCALDEFS= Check local definition changes
SETLOCALDEFS=0


After all correct... Lets reboot.

Quote:
[root
 ...

[ Show the rest of the message ]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Delete VPS on Source Hardware Node + VZMigrate
Next Topic: Afanasyev faced problem with iptable_nat
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Tue Nov 04 03:57:41 GMT 2025

Total time taken to generate the page: 0.15018 seconds
Powered by FUDforum Powered by Virtuozzo Containers