OpenVZ Forum: Users » problem with veth feature..

Home » Mailing lists » Users » problem with veth feature..

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

problem with veth feature.. [message #3914]

Fri, 23 June 2006 18:00

Rachid Abdoun
Messages: 12
Registered: June 2006

Junior Member

Hello,

I'm trying to use the new features of openvz (veth...) but i
encounter problems... i have this kernel :

phoenix:~# uname -a
Linux phoenix 2.6.16-026test014 #1 Fri Jun 23 13:29:16 CEST 2006 i686
GNU/Linux

(compiled myself)

and version 3.0.10 of vzctl :

phoenix:~# vzctl --version
vzctl version 3.0.10

i run 2 PV'S :

phoenix:~# vzctl status 101
VPSID 101 exist mounted running
phoenix:~# vzctl status 102
VPSID 102 exist mounted running

when i try to add veth on a VPs i have this error :

phoenix:~# vzctl set 101 --veth_add
veth101.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B --save
Processing veth devices
Warning: veth feature is not supported by kernel, skipped veth configure
Saved parameters for VPS 101

what can I do? Thank you!

- Rachid

Report message to a moderator

Re: problem with veth feature.. [message #3960 is a reply to message #3914]

Mon, 26 June 2006 08:06

dev
Messages: 1693
Registered: September 2005
Location: Moscow

Senior Member

If you compiled kernel yourself then check that you enabled
CONFIG_VE_ETHDEV option.
If you took binary kernel from openvz.org then check that you have
loaded the required kernel module:
# modprobe vzethdev

Thanks,
Kirill

> Hello,
>
> I'm trying to use the new features of openvz (veth...) but i encounter
> problems... i have this kernel :
>
> phoenix:~# uname -a
> Linux phoenix 2.6.16-026test014 #1 Fri Jun 23 13:29:16 CEST 2006 i686
> GNU/Linux
>
> (compiled myself)
>
> and version 3.0.10 of vzctl :
>
> phoenix:~# vzctl --version
> vzctl version 3.0.10
>
> i run 2 PV'S :
>
> phoenix:~# vzctl status 101
> VPSID 101 exist mounted running
> phoenix:~# vzctl status 102
> VPSID 102 exist mounted running
>
> when i try to add veth on a VPs i have this error :
>
> phoenix:~# vzctl set 101 --veth_add
> veth101.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B --save
> Processing veth devices
> Warning: veth feature is not supported by kernel, skipped veth configure
> Saved parameters for VPS 101
>
> what can I do? Thank you!
>
> - Rachid

Report message to a moderator

Re: problem with veth feature.. [message #4139 is a reply to message #3960]

Thu, 29 June 2006 15:04

Rachid Abdoun
Messages: 12
Registered: June 2006

Junior Member

Oh tank you so much it works!!

How can I load this module automatically?

thanks

Le 26 juin 06 � 10:06, Kirill Korotaev a �crit :

> If you compiled kernel yourself then check that you enabled
> CONFIG_VE_ETHDEV option.
> If you took binary kernel from openvz.org then check that you have
> loaded the required kernel module:
> # modprobe vzethdev
>
> Thanks,
> Kirill
>
>> Hello,
>> I'm trying to use the new features of openvz (veth...) but i
>> encounter problems... i have this kernel :
>> phoenix:~# uname -a
>> Linux phoenix 2.6.16-026test014 #1 Fri Jun 23 13:29:16 CEST 2006
>> i686 GNU/Linux
>> (compiled myself)
>> and version 3.0.10 of vzctl :
>> phoenix:~# vzctl --version
>> vzctl version 3.0.10
>> i run 2 PV'S :
>> phoenix:~# vzctl status 101
>> VPSID 101 exist mounted running
>> phoenix:~# vzctl status 102
>> VPSID 102 exist mounted running
>> when i try to add veth on a VPs i have this error :
>> phoenix:~# vzctl set 101 --veth_add
>> veth101.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B --save
>> Processing veth devices
>> Warning: veth feature is not supported by kernel, skipped veth
>> configure
>> Saved parameters for VPS 101
>> what can I do? Thank you!
>> - Rachid

Report message to a moderator

Re: problem with veth feature.. [message #4140 is a reply to message #4139]

Thu, 29 June 2006 15:12

dev
Messages: 1693
Registered: September 2005
Location: Moscow

Senior Member

Hello,

/etc/modules.conf
or
/etc/modprobe.conf
depending on your distro.

Kirill

> Oh tank you so much it works!!
>
> How can I load this module automatically?
>
> thanks
>
> Le 26 juin 06 � 10:06, Kirill Korotaev a �crit :
>
>> If you compiled kernel yourself then check that you enabled
>> CONFIG_VE_ETHDEV option.
>> If you took binary kernel from openvz.org then check that you have
>> loaded the required kernel module:
>> # modprobe vzethdev
>>
>> Thanks,
>> Kirill
>>
>>> Hello,
>>> I'm trying to use the new features of openvz (veth...) but i
>>> encounter problems... i have this kernel :
>>> phoenix:~# uname -a
>>> Linux phoenix 2.6.16-026test014 #1 Fri Jun 23 13:29:16 CEST 2006
>>> i686 GNU/Linux
>>> (compiled myself)
>>> and version 3.0.10 of vzctl :
>>> phoenix:~# vzctl --version
>>> vzctl version 3.0.10
>>> i run 2 PV'S :
>>> phoenix:~# vzctl status 101
>>> VPSID 101 exist mounted running
>>> phoenix:~# vzctl status 102
>>> VPSID 102 exist mounted running
>>> when i try to add veth on a VPs i have this error :
>>> phoenix:~# vzctl set 101 --veth_add
>>> veth101.0,00:12:34:56:78:9A,eth0,00:12:34:56:78:9B --save
>>> Processing veth devices
>>> Warning: veth feature is not supported by kernel, skipped veth
>>> configure
>>> Saved parameters for VPS 101
>>> what can I do? Thank you!
>>> - Rachid

Report message to a moderator

Previous Topic:	How venetxx are created?
Next Topic:	Network problem

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 21 11:16:38 GMT 2024

Total time taken to generate the page: 0.03031 seconds