Home » International » Russian » SNAT/MASQUERADE (Вопрос по поводу SNAT/MASQUERADE для VE)
SNAT/MASQUERADE [message #38444] |
Sun, 20 December 2009 13:23 ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
sHaggY_caT
Messages: 144 Registered: August 2008 Location: Moscow, Russian Federatio...
|
Senior Member |
![galia@shaggy-cat.ru](/theme/ovz3/images/jabber.png)
|
|
Привет. Есть вопрос по поводу SNAT/MASQUERADE для VE. Когда-то уже решала этот вопрос, на старом личном OpenVZ сервере MASQUERADE для контейнеров работает хорошо.
Нужно признаться, что я не люблю iptables, или он не любит меня *(тоже как вариант).
Поэтому, когда сейчас встала задача http://blog.shaggy-cat.ru/2009/12/blog-post.html сделать нормальный инсталлятор для OpenVZ, с PXE кикстартом, с менеджментом puppet'ом, я поняла три вещи:
1. На сколько все-таки виртуоза удобнее ![Sad](images/smiley_icons/icon_sad.gif)
2. Что iptables меня не любит
3. И что я не помню, как настроила MASQUERADE на старом сервере. Там все работает, но простой копипаст дампа правил ничего не дает ![Sad](images/smiley_icons/icon_sad.gif)
Я написала в лист рассылки [Users] problems with SNAT/MASQUERADE
Но меня вполне справедливо ткнули носом в ту статью: http://wiki.openvz.org/Using_NAT_for_VE_with_private_IPs которую за вчера и сегодня я перечитала, наверное, раз десять.
Так же попробовала скрипт из статьи: http://wiki.openvz.org/Using_NAT_for_VE_with_private_IPs
В оригинальном и переделанном виде. Ничего не получается (, помогите пожалуйста разобраться, где ошибка, так как в рассылке, наверное, испугались моего "хорошего" английского, и много букв текста.
ниже конфиги, дампы iptables:
[root@ovz-test2 ~]# vzlist | grep 407
407 14 running 10.0.5.47 test-dns.local
[root@ovz-test2 ~]#
ICMP from HN to VE:
[root@ovz-test2 ~]# ping -c 1 10.0.5.47
PING 10.0.5.47 (10.0.5.47) 56(84) bytes of data.
64 bytes from 10.0.5.47: icmp_seq=1 ttl=64 time=0.258 ms
--- 10.0.5.47 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.258/0.258/0.258/0.000 ms
[root@ovz-test2 ~]#
ICMP from VE to HN:
[root@test-dns ~]# ping -c 1 ovz-test2
PING ovz-test2.local (10.0.5.128) 56(84) bytes of data.
64 bytes from ovz-test2.local (10.0.5.128): icmp_seq=1 ttl=64 time=0.064 ms
--- ovz-test2.local ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.064/0.064/0.064/0.000 ms
[root@test-dns ~]#
And, icmp from VE to another host in LAN:
[root@test-dns ~]# ping -c 1 puppet
PING puppet.local (10.0.5.16) 56(84) bytes of data.
64 bytes from puppet.loc (10.0.5.16): icmp_seq=1 ttl=63 time=1.78 ms
--- puppet.local ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 1.780/1.780/1.780/0.000 ms
[root@test-dns ~]#
But, NAT to another networks, for example for internet, does'nt work:
[root@test-dns ~]# ping -c 1 google.com
PING google.com (74.125.77.147) 56(84) bytes of data.
From ovz-test2.local (10.0.5.128) icmp_seq=1 Destination Net Unreachable
--- google.com ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
[root@test-dns ~]#
[root@test-dns ~]# wget google.com
--2009-12-20 13:11:19-- http://google.com/
Resolving google.com... 74.125.77.104, 74.125.77.99, 74.125.77.147
Connecting to google.com|74.125.77.104|:80... failed: Network is unreachable.
Connecting to google.com|74.125.77.99|:80... failed: Network is unreachable.
Connecting to google.com|74.125.77.147|:80... failed: Network is unreachable.
[root@test-dns ~]#
Configuration of HN:
[root@ovz-test2 ~]# cat /etc/redhat-release
CentOS release 5.3 (Final)
[root@ovz-test2 ~]#
[root@ovz-test2 ~]# uname -a
Linux ovz-test2.local 2.6.18-128.2.1.el5.028stab064.4 #1 SMP Wed Jul
22 00:11:00 MSD 2009 i686 i686 i386 GNU/Linux
[root@ovz-test2 ~]#
[root@ovz-test2 ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 54:52:00:3D:CB:40
inet addr:10.0.5.128 Bcast:10.0.5.255 Mask:255.255.255.0
inet6 addr: fe80::5652:ff:fe3d:cb40/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:112743 errors:0 dropped:0 overruns:0 frame:0
TX packets:119926 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21101421 (20.1 MiB) TX bytes:23473181 (22.3 MiB)
Interrupt:11 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:878 (878.0 b) TX bytes:878 (878.0 b)
venet0 Link encap:UNSPEC HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:267 errors:0 dropped:0 overruns:0 frame:0
TX packets:368 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:28529 (27.8 KiB) TX bytes:29631 (28.9 KiB)
[root@ovz-test2 ~]#
[root@ovz-test2 ~]# rpm -qa | grep vz
vzctl-lib-3.0.23-1
vzrpm43-python-4.3.3-7_nonptl.6
vzrpm44-4.4.1-22.5
vzrpm43-4.3.3-7_nonptl.6
vzquota-3.0.12-1
vzpkg-2.7.0-18
ovzkernel-2.6.18-128.2.1.el5.028stab064.4
vzrpm44-python-4.4.1-22.5
vzctl-3.0.23-1
vzdump-1.1-2
vzyum-2.4.0-11
ha-ovz-tools-1.2-1
[root@ovz-test2 ~]#
[root@ovz-test2 ~]# sysctl -p
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.ip_forward = 1
net.ipv4.conf.all.rp_filter = 1
kernel.sysrq = 1
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0
[root@ovz-test2 ~]#
[root@ovz-test2 ~]# cat /etc/sysconfig/vz
## Global parameters
VIRTUOZZO=yes
LOCKDIR=/vz/lock
DUMPDIR=/vz/dump
VE0CPUUNITS=1000
## Logging parameters
LOGGING=yes
LOGFILE=/var/log/vzctl.log
LOG_LEVEL=0
VERBOSE=0
## Disk quota parameters
DISK_QUOTA=yes
VZFASTBOOT=no
# Disable module loading. If set, vz initscript do not load any modules.
#MODULES_DISABLED=yes
# The name of the device whose IP address will be used as source IP for CT.
# By default automatically assigned.
VE_ROUTE_SRC_DEV="eth0"
# Controls which interfaces to send ARP requests and modify APR tables on.
NEIGHBOUR_DEVS=detect
## Template parameters
TEMPLATE=/vz/template
## Defaults for containers
VE_ROOT=/vz/root/$VEID
VE_PRIVATE=/vz/private/$VEID
CONFIGFILE="vps.basic"
DEF_OSTEMPLATE="fedora-core-4"
## Load vzwdog module
VZWDOG="no"
## IPv4 iptables kernel modules
IPTABLES="iptable_filter iptable_mangle ipt_limit ipt_multiport
ipt_tos ipt_TOS ipt_REJECT ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_LOG
ipt_length ip_conntrack ip_conntrack_ftp ip_conntrack_irc
ipt_conntrack ipt_state ipt_helper iptable_nat ip_nat_ftp ip_nat_irc
ipt_REDIRECT"
## Enable IPv6
IPV6="no"
## IPv6 ip6tables kernel modules
IP6TABLES="ip6_tables ip6table_filter ip6table_mangle ip6t_REJECT"
[root@ovz-test2 ~]# cat /proc/sys/net/ipv4/conf/eth0/forwarding
1
[root@ovz-test2 ~]# cat /proc/sys/net/ipv4/conf/venet0/forwarding
1
[root@ovz-test2 ~]#
Вот одна из нерабочих конфигураций, которых я уже перепробовала сотни:
[root@ovz-test2 ~]# iptables-save
# Generated by iptables-save v1.3.5 on Sun Dec 20 13:17:25 2009
*raw
:PREROUTING ACCEPT [9708:1526221]
:OUTPUT ACCEPT [9198:1571058]
COMMIT
# Completed on Sun Dec 20 13:17:25 2009
# Generated by iptables-save v1.3.5 on Sun Dec 20 13:17:25 2009
*nat
:PREROUTING ACCEPT [73:4765]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [945:55800]
-A POSTROUTING -m mark --mark 0x9 -j MASQUERADE
-A POSTROUTING -o eth0 -j MASQUERADE
-A POSTROUTING -o venet0 -j MASQUERADE
-A POSTROUTING -m mark --mark 0x9 -j MASQUERADE
COMMIT
# Completed on Sun Dec 20 13:17:25 2009
# Generated by iptables-save v1.3.5 on Sun Dec 20 13:17:25 2009
*mangle
:PREROUTING ACCEPT [11775:1810121]
:INPUT ACCEPT [11090:1747639]
:FORWARD ACCEPT [668:61270]
:OUTPUT ACCEPT [11071:1902912]
:POSTROUTING ACCEPT [11739:1964182]
-A PREROUTING -i eth0 -j MARK --set-mark 0x9
-A PREROUTING -i venet0 -j MARK --set-mark 0x9
-A PREROUTING -i eth0 -j MARK --set-mark 0x9
-A PREROUTING -i venet0 -j MARK --set-mark 0x9
COMMIT
# Completed on Sun Dec 20 13:17:25 2009
# Generated by iptables-save v1.3.5 on Sun Dec 20 13:17:25 2009
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [11071:1902912]
:RH-Firewall-1-INPUT - [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A FORWARD -j RH-Firewall-1-INPUT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -i eth0 -j ACCEPT
-A RH-Firewall-1-INPUT -i venet0 -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p esp -j ACCEPT
-A RH-Firewall-1-INPUT -p ah -j ACCEPT
-A RH-Firewall-1-INPUT -d 224.0.0.251 -p udp -m udp --dport 5353 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
COMMIT
# Completed on Sun Dec 20 13:17:25 2009
[root@ovz-test2 ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
RH-Firewall-1-INPUT all -- anywhere anywhere
Chain FORWARD (policy ACCEPT)
target prot opt source destination
RH-Firewall-1-INPUT all -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain RH-Firewall-1-INPUT (2 references)
target prot opt source destination
ACCEPT all -- anywhere anywhere
ACCEPT all -- anywhere anywhere
ACCEPT all -- anywhere anywhere
ACCEPT icmp -- anywhere anywhere icmp any
ACCEPT esp -- anywhere anywhere
ACCEPT ah -- anywhere anywhere
ACCEPT udp -- anywhere 224.0.0.251 udp dpt:mdns
ACCEPT udp -- anywhere anywhere udp dpt:ipp
ACCEPT tcp -- anywhere anywhere tcp dpt:ipp
ACCEPT all -- anywhere anywhere state
RELATED,ESTABLISHED
REJECT all -- anywhere anywhere
reject-with icmp-host-prohibited
[root@ovz-test2 ~]#
===========
На старой ноде у меня вот такие правила(не имеющие отношения к NAT поскипала):
*nat
-A POSTROUTING -m mark --mark 0x9 -j MASQUERADE
*mangle
POSTROUTING ACCEPT [15696772:11135009050]
-A PREROUTING -i br0 -j MARK --set-mark 0x9
-A PREROUTING -i wlan0 -j MARK --set-mark 0x9
-A PREROUTING -i venet0 -j MARK --set-mark 0x9
-A FORWARD -o eth0 -j ACCEPT
-A RH-Firewall-1-INPUT -i br0 -j ACCEPT
-A RH-Firewall-1-INPUT -i ath0 -j ACCEPT
-A RH-Firewall-1-INPUT -i venet0 -j ACCEPT
Если кто-то захочет облегчить мои мучения, и ему они станут интересны, приведу полностью ![Smile](images/smiley_icons/icon_smile.gif)
IT-outsource for UNIX servers,
http://ha-systems.ru
|
|
|
Re: SNAT/MASQUERADE [message #38450 is a reply to message #38444] |
Sun, 20 December 2009 19:33 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) |
sHaggY_caT
Messages: 144 Registered: August 2008 Location: Moscow, Russian Federatio...
|
Senior Member |
![galia@shaggy-cat.ru](/theme/ovz3/images/jabber.png)
|
|
Проблема решена. Оказалось, что для HN мой инсталлятор не прописывает default gateway.
Так как все ставится с локальных репозиториев, я раньше и не заметила
IT-outsource for UNIX servers,
http://ha-systems.ru
|
|
|
Goto Forum:
Current Time: Fri Aug 16 16:52:06 GMT 2024
Total time taken to generate the page: 0.02988 seconds
|