| CentOS, Multicast, and Bridging [message #37631] |
Sat, 03 October 2009 00:31  |
althalus
Messages: 12
Registered: April 2009
|
Junior Member |
|
|
Have set up an x64 CentOS server running OpenVZ kernel 2.6.18-128.2.1.el5.028stab064.7 from the yum repo.
My network is an internal network (192.168.1.0), which gets internet access through an ADSL2 modem.
To get multicast working for my CT's, I set up a bridge interface. This is working great for the CTs, Multicast works, and the CTs have internet access.
BUT, the host only has local network access, NOT internet.
I'm at a loss here. The routes look fine, every other machine on the network has internet access, even the CTs on the host have internet...
EDIT: I should also add there are no firewall rules on the host. Clearing the rules from iptables was the first thing I did.
Some of my configs:
eth0:
DEVICE=eth0
BRIDGE=en0
HWADDR=00:40:D0:93:1D:D4
ONBOOT=yes
en0: (Bridge)
DEVICE=en0
TYPE=Bridge
ONBOOT=yes
BOOTPROTO=static
IPADDR=192.168.1.20
NETMASK=255.255.255.0
NETWORK=192.168.1.0
GATEWAY=192.168.1.1
Output from ip route on host:
192.168.1.0/24 dev en0 proto kernel scope link src 192.168.1.20
169.254.0.0/16 dev en0 scope link
default via 192.168.1.1 dev en0
[Updated on: Sat, 03 October 2009 00:36] Report message to a moderator |
|
|
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
