Hello,
is it possible to add an ip tunnel endpoint to an ve?
When i run a tcpdump inside the ve i see the ip packages.
15:42:33.015062 IP 192.168.17.1 > 192.168.17.21: IP 192.168.19.17.54558 > 192.168.17.20.www: S 229973045:229973045(0) win 5840 <mss 1380,sackOK,timestamp 1449385987 0,nop,wscale 6> (ipip-proto-4)
But when i try to add the tunnel endpoint (inside the ve) i get the following error message:
ve01# ip tunnel add tunl0 mode ipip remote 192.168.17.20 local 192.168.17.21 dev venet0
ioctl: No such device
The ipip module is loaded on the hn.
hn01:~# lsmod |grep ipip
ipip 13572 0
tunnel4 7824 1 ipip
Any ideas?
Thanks
jan
[Updated on: Tue, 15 September 2009 08:57]
Report message to a moderator