Help please with seting up networking inside a VE [message #37163] |
Mon, 24 August 2009 12:07 ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
dragos2
Messages: 15 Registered: August 2009
|
Junior Member |
|
|
I am running an Ubuntu 8.04 64 bit
# uname -a
2.6.24-24-openvz
The server has a public IP address and name, and has
internet connectivity(I configure it through ssh).
The problem is that I can't get networking to work inside
a new VE, for example the precreated ubuntu-8.04-x86
vzctl create 777 --ostemplate ubuntu-8.04-x86
vzctl start 777
vzctl set 777 --ip 193.*.*.* --hostname mydomain.anotherdomain.com --nameserver 193.x.y.z --save
The ifconfig outside the ve:
root@deb01:~# ifconfig
eth1 Link encap:Ethernet HWaddr 00:1e:68:04:69:08
inet addr:193.19.*.* Bcast:193.19.*.* Mask:255.255.255.0
inet6 addr: fe-----------e04:6908/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:242768 errors:0 dropped:0 overruns:0 frame:0
TX packets:123061 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:337725456 (322.0 MB) TX bytes:9318291 (8.8 MB)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:88 (88.0 B) TX bytes:88 (88.0 B)
venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:11 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:660 (660.0 B) TX bytes:0 (0.0 B)
Inside the VE:
root@deb01:/# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:600 (600.0 B) TX bytes:600 (600.0 B)
venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:193.19.*.* P-t-P:193.19.*.* Bcast:0.0.0.0 Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
The sysctl.conf
# On Hardware Node we generally need
# packet forwarding enabled and proxy arp disabled
net.ipv4.conf.default.forwarding=1
net.ipv4.conf.default.proxy_arp=1
net.ipv4.ip_forward=1
# Enables source route verification
net.ipv4.conf.all.rp_filter = 1
# Enables the magic-sysrq key
kernel.sysrq = 1
# TCP Explict Congestion Notification
#net.ipv4.tcp_ecn = 0
# we do not want all our interfaces to send redirects
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0
Inside the VE there is no internet.
Any sugestions of what to do more ?
[Updated on: Mon, 24 August 2009 12:09] Report message to a moderator
|
|
|
|
|
|