OpenVZ Forum


Home » General » Support » Asterisk conference and DAHDI (SOLVED)
icon5.gif  Asterisk conference and DAHDI (SOLVED) [message #35508] Tue, 31 March 2009 23:03 Go to next message
sammy08 is currently offline  sammy08
Messages: 21
Registered: April 2008
Junior Member
Hello Folks,

I am running an Asterisk based distro called Elastix in a VE. The Music on Hold works but I tried for hours to get the conference working without success. I created a conference number 3000 with PIN of 1234. I dial into the conference and I am prompted for the PIN but when I enter the PIN I get that is not a valid conference PIN number.

The attached log shows:
"app_meetme.c: Unable to open pseudo device"

The problem is that Elastix has Asterisk 1.4.23 and is using DAHDI which is due to replace Ztdummy so when I followed this:

http://wiki.openvz.org/Asterisk_from_source

it didn't help much.

I even downloaded the Asterisk 1.4.24 and recompiled Asterisk but that didn't help either. Please see the attached log.


The CLI shows that the DAHDI modules are loaded:

el*CLI> module reload chan_dahdi.so
-- Reloading module 'chan_dahdi.so' (DAHDI Telephony w/PRI)
== Parsing '/etc/asterisk/chan_dahdi.conf': Found
== Parsing '/etc/asterisk/dahdi-channels.conf': Found
== Parsing '/etc/asterisk/chan_dahdi_additional.conf': Found
== Parsing '/etc/asterisk/users.conf': Found
el*CLI>

Any ideas please?

regards,

Kabong2008
  • Attachment: log.txt
    (Size: 4.16KB, Downloaded 463 times)

[Updated on: Thu, 02 April 2009 10:09]

Report message to a moderator

Re: Asterisk conference and DAHDI [message #35535 is a reply to message #35508] Thu, 02 April 2009 09:19 Go to previous messageGo to next message
maratrus is currently offline  maratrus
Messages: 1495
Registered: August 2007
Location: Moscow
Senior Member
Hi Errol,

I've never used asterisk but
- make sure that all needed kernel modules are loaded on the HN
- make sure that all needed devices exist inside VE (/dev directory)
BTW, I found this link

http://www.elastix.org/index.php?option=com_fireboard&fu nc=view&catid=31&id=18202&Itemid=55
Re: Asterisk conference and DAHDI [message #35536 is a reply to message #35535] Thu, 02 April 2009 10:04 Go to previous messageGo to next message
sammy08 is currently offline  sammy08
Messages: 21
Registered: April 2008
Junior Member
maratrus wrote on Thu, 02 April 2009 04:19

Hi Errol,

I've never used asterisk but
- make sure that all needed kernel modules are loaded on the HN
- make sure that all needed devices exist inside VE (/dev directory)
BTW, I found this link

http://www.elastix.org/index.php?option=com_fireboard&fu nc=view&catid=31&id=18202&Itemid=55


Hi Marat,

I had resolved it earlier by just following the principles for doing it for Zaptel. I would like to do a How to for the wiki would that be okay?

regards,

Errol

[Updated on: Thu, 02 April 2009 10:09]

Report message to a moderator

Re: Asterisk conference and DAHDI [message #35537 is a reply to message #35536] Thu, 02 April 2009 10:13 Go to previous messageGo to next message
maratrus is currently offline  maratrus
Messages: 1495
Registered: August 2007
Location: Moscow
Senior Member
Hello,

Quote:


I would like to do a How to for the wiki would that be okay?


Of course, it would be great.
openvz cant migrate the container [message #35538 is a reply to message #35537] Thu, 02 April 2009 13:03 Go to previous messageGo to next message
mekarih is currently offline  mekarih
Messages: 1
Registered: April 2009
Junior Member
hello
i have install openvz and webvz...
the problem is now, i cannot migrate the container using both of the tools....
when do it in the openvz....
the eeror said, you dont have vzmigrate command..
do we need to install the vzmigrate command in the container...
and one more thing, do we have internet connection in the container created...
webVz also cannot migrate the container...
can someone help me
thanx...
Re: openvz cant migrate the container [message #35539 is a reply to message #35538] Thu, 02 April 2009 13:45 Go to previous messageGo to next message
sammy08 is currently offline  sammy08
Messages: 21
Registered: April 2008
Junior Member
mekarih wrote on Thu, 02 April 2009 08:03

hello
i have install openvz and webvz...
the problem is now, i cannot migrate the container using both of the tools....
when do it in the openvz....
the eeror said, you dont have vzmigrate command..
do we need to install the vzmigrate command in the container...
and one more thing, do we have internet connection in the container created...
webVz also cannot migrate the container...
can someone help me
thanx...


Can you please start a new thread with this message. This post has nothing to do with the current thread.

kabong
Re: Asterisk conference and DAHDI (SOLVED) [message #35561 is a reply to message #35508] Sat, 04 April 2009 05:58 Go to previous messageGo to next message
bbhenry is currently offline  bbhenry
Messages: 17
Registered: February 2009
Junior Member
Hi, can you share how you install Elastix in a VE?
Re: Asterisk conference and DAHDI (SOLVED) [message #35580 is a reply to message #35561] Mon, 06 April 2009 17:51 Go to previous message
sammy08 is currently offline  sammy08
Messages: 21
Registered: April 2008
Junior Member
http://wiki.openvz.org/Creating_a_CentOS_5.0_Template

You need to dedicated machine for this though.

Previous Topic: Ip_conntrack_max is a unknown key
Next Topic: Quota on mounted fs
Goto Forum:
  


Current Time: Sun Nov 10 20:38:00 GMT 2024

Total time taken to generate the page: 0.03750 seconds