Noob questions [message #3549] |
Sat, 03 June 2006 05:09 ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Cliff Wells
Messages: 30 Registered: June 2006
|
Member |
|
|
Hi,
I've decided to try out OpenVZ on my home system prior to using it on
some servers. My plan was to continue to use my normal desktop but run
some services (httpd at least) in a VE.
I ran into a couple issues, one that I have a fix for, and one that
perhaps someone could shed some light on for me.
To start, XFS support was not compiled in, therefore I rebuilt from the
src.rpm and added this (just a note).
General system info:
FC4 (updated from the usual suspects: freshrpms, dag, etc)
Athlon 1700+ (kernel built for i686)
XFS filesystem on aic7xxx
NVidia binary driver (dual head using twinview, xinerama off)
ovzkernel-2.6.16-026test012.1 (rebuilt from src rpm)
2) I'm using the binary NVidia driver. It was initially unable to
build because it couldn't locate Makefile.cpu. This was easily resolved
by copying this file
from /usr/src/redhat/BUILD/ovzkernel-2.6.16/linux-2.6.16/arch/i38 6/Makefile.cpu
to /lib/modules/2.6.16-026test012.1/build/arch/i386/
3) After successfully getting X to start, I am unable to use the mouse.
It moves only along a vertical axis in the center of the screen (this is
the issue I could use help with). The mouse in question is a Logitech
cordless USB mouse.
So regarding issue #3, is running X outside a VE not supported or have I
simply run into a bug or configuration issue?
Any help appreciated.
Regards,
Cliff
--
|
|
|
Re: Noob questions [message #3563 is a reply to message #3549] |
Mon, 05 June 2006 05:59 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Vasily Tarasov
Messages: 1345 Registered: January 2006
|
Senior Member |
|
|
Cliff Wells wrote:
>Hi,
>
>I've decided to try out OpenVZ on my home system prior to using it on
>some servers. My plan was to continue to use my normal desktop but run
>some services (httpd at least) in a VE.
>
>I ran into a couple issues, one that I have a fix for, and one that
>perhaps someone could shed some light on for me.
>
>To start, XFS support was not compiled in, therefore I rebuilt from the
>src.rpm and added this (just a note).
>
>General system info:
>FC4 (updated from the usual suspects: freshrpms, dag, etc)
>Athlon 1700+ (kernel built for i686)
>XFS filesystem on aic7xxx
>NVidia binary driver (dual head using twinview, xinerama off)
>ovzkernel-2.6.16-026test012.1 (rebuilt from src rpm)
>
>2) I'm using the binary NVidia driver. It was initially unable to
>build because it couldn't locate Makefile.cpu. This was easily resolved
>by copying this file
>from /usr/src/redhat/BUILD/ovzkernel-2.6.16/linux-2.6.16/arch/i38 6/Makefile.cpu
>to /lib/modules/2.6.16-026test012.1/build/arch/i386/
>
>3) After successfully getting X to start, I am unable to use the mouse.
>It moves only along a vertical axis in the center of the screen (this is
>the issue I could use help with). The mouse in question is a Logitech
>cordless USB mouse.
>
>
>So regarding issue #3, is running X outside a VE not supported or have I
>simply run into a bug or configuration issue?
>
>
There is no such limitation in openVZ.
I suppose it's a misconfiguation, maybe wrong driver is in use.
>Any help appreciated.
>
>Regards,
>Cliff
>
>
>
>
>
|
|
|
Re: Noob questions [message #3565 is a reply to message #3563] |
Mon, 05 June 2006 07:24 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) |
dev
Messages: 1693 Registered: September 2005 Location: Moscow
|
Senior Member |
![5072133](/theme/ovz3/images/icq.png)
|
|
Also check, that you have CONFIG_INPUT_EVDEV option enabled.
Kirill
> Cliff Wells wrote:
>
>> Hi,
>>
>> I've decided to try out OpenVZ on my home system prior to using it on
>> some servers. My plan was to continue to use my normal desktop but run
>> some services (httpd at least) in a VE.
>>
>> I ran into a couple issues, one that I have a fix for, and one that
>> perhaps someone could shed some light on for me.
>>
>> To start, XFS support was not compiled in, therefore I rebuilt from the
>> src.rpm and added this (just a note).
>>
>> General system info:
>> FC4 (updated from the usual suspects: freshrpms, dag, etc)
>> Athlon 1700+ (kernel built for i686)
>> XFS filesystem on aic7xxx
>> NVidia binary driver (dual head using twinview, xinerama off)
>> ovzkernel-2.6.16-026test012.1 (rebuilt from src rpm)
>>
>> 2) I'm using the binary NVidia driver. It was initially unable to
>> build because it couldn't locate Makefile.cpu. This was easily resolved
>> by copying this file
>> from
>> /usr/src/redhat/BUILD/ovzkernel-2.6.16/linux-2.6.16/arch/i38 6/Makefile.cpu
>> to /lib/modules/2.6.16-026test012.1/build/arch/i386/
>>
>> 3) After successfully getting X to start, I am unable to use the mouse.
>> It moves only along a vertical axis in the center of the screen (this is
>> the issue I could use help with). The mouse in question is a Logitech
>> cordless USB mouse.
>>
>>
>> So regarding issue #3, is running X outside a VE not supported or have I
>> simply run into a bug or configuration issue?
>>
> There is no such limitation in openVZ.
> I suppose it's a misconfiguation, maybe wrong driver is in use.
>
>> Any help appreciated.
>>
>> Regards,
>> Cliff
>>
>>
>>
>>
>>
>
|
|
|