 ***SOLVED*** Networking Problem - 2 different subnets / 1 Interface? [message #35041] |
Mon, 23 February 2009 22:29  |
oeginc
Messages: 5
Registered: February 2009
|
Junior Member |
|
|
I can't be the only person that is having this problem, I have seen some others in a similar situation, but most of them had 2 interfaces they could route to..
Here's my situation:
I have 2 IP blocks of 32 IP addresses each, let's call them (for simplicity)
Block #1 - 10.10.10.1/27
Block #2 - 10.10.20.1/27
I have the host machine setup as 10.10.10.2 (10.10.10.1 is the router for Block #1) and as long as I create a machine that uses an IP address from Block #1 everything works fine...
The problem comes in that I have need to be able to create machines from 10.10.20.x IP block on the 10.10.10.2 host.
Under XEN this worked just fine, I have no clue how to get this to work using venet's...
My setup:
* Running ProxMox v1.1
* Debian 4.0
* Kernel = Linux server01 2.6.24-2-pve #1 SMP PREEMPT Wed Jan 14 11:32:49 CET 2009 x86_64 GNU/Linux
* /proc/vz/version = ovz005
* /proc/vz/veth = 1.0
/etc/network/interfaces
=======================
auto lo
iface lo inet loopback
auto vmbr0
iface vmbr0 inet static
address 10.10.10.2
netmask 255.255.255.224
gateway 10.10.10.1
bridge_ports eth0
bridge_stp off
bridge_fd 0
I imagine I will need to setup an IP on the host machine for Block #2 and then route to it somehow, I have no idea..
I'm in a pinch to get this setup, my nameservers are down right now because of this. 
Any help you could give is greatly appreciated...
********** SOLUTION **********
Actually, the answer is very simple.. I'm not sure how I missed it, but eventually I stumbled upon this...
edit /etc/vz/vz.conf
and change the line that says
NEIGHBOUR_DEVS=detect
to
NEIGHBOUR_DEVS=all
and reboot! Everything worked fine after that..
[Updated on: Tue, 24 February 2009 16:56] Report message to a moderator |
|
|
|
|
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
