Public/private network access openvpn routing [message #34977] |
Sun, 15 February 2009 17:10 |
Santo
Messages: 1 Registered: February 2009
|
Junior Member |
|
|
Hello,
We installed openvpn and its working well, but for a small issue.
setup:
HN with 2 interfaces
eth0 - public IP - 91.91.91.100
eth1 - private IP for access to private network - 10.1.1.20
CT with 2 IP's:
Public IP: 91.91.91.101
Private IP: 10.1.1.101
Openvpn:
net/dhcp: 10.1.1.192/26
Problem:
We can establish a tunnel to 91.91.91.101 and we get an IP 10.1.1.195
We can access the internet with no problem, but the access to the private network is limited to 10.1.1.20 (HN private IP address).
How/what can we do to have access to the rest of the private network? I suspect some iptable rule must be set.. possible on the HN.
Can anyone help with this?
Thank you
Regards
[Updated on: Sun, 15 February 2009 17:11] Report message to a moderator
|
|
|