Multiple VLANS in VE doesn't work? <SOLVED> [message #33476] |
Thu, 16 October 2008 07:02 |
januszzz
Messages: 50 Registered: January 2007 Location: Opole, Poland
|
Member |
|
|
Hi,
I've created single VLANs in VE, the problem is I cannot setup the second.
My config:
HN:
eth0.980 10.0.0.254
eth0.990 10.0.1.254
VE:
eth0.980 10.0.0.2
eth0.990 10.0.1.2*
*when I configure the second vlan on eth1 (the next veth interface) tcpdump output is the same.
The problem: VLAN 980 works perfectly, while 990 - is not. When I switch them, 990 works 100%, 980 not. So it appears that only first vlan works ok.
What works in first vlan: everything, 100% works as expected.
What works in second vlan: I can ping HN vlan devices (so its 10.0.0.254 10.0.1.254), I can ping all hosts in 10.0.0.0/24.
What doesn't work: I cannot ping anything from vlan 990 (so its 10.0.1.0/24) except HN interface 10.0.0.254.
while pinging, tcpdump on HN gives:
09:50:19.105190 IP 10.0.1.2 > 10.0.0.1: ICMP echo request, id 53822, seq 46, length 64
How I resolve that?
And one more question: if I've got two vlans with the same class of addresses I'm not able to setup proper routes on HN (ie. the same ip can exists in 2 different places), am I right?
[Updated on: Thu, 18 December 2008 07:21] Report message to a moderator
|
|
|