VLAN not working in VE? <SOLVED> [message #33405] |
Mon, 13 October 2008 12:23 ![Go to next message Go to previous message](/theme/ovz3/images/down.png) |
januszzz
Messages: 50 Registered: January 2007 Location: Opole, Poland
|
Member |
|
|
Hi,
I got 2 interfaces on HE and wanted one for management and the second for VE's (I need several VLANs there).
So I setup HE interfaces like this (fat trimmed)
eth0 Link encap:Ethernet HWaddr 00:21:5e:26:b3:cc
inet addr:126.66.64.151 Bcast:126.66.65.255 Mask:255.255.254.0
eth1 Link encap:Ethernet HWaddr 00:21:5e:26:b3:ce
inet6 addr: fe80::221:5eff:fe26:b3ce/64 Scope:Link
eth1.20 Link encap:Ethernet HWaddr 00:21:5e:26:b3:ce
inet6 addr: fe80::221:5eff:fe26:b3ce/64 Scope:Link
eth1.980 Link encap:Ethernet HWaddr 00:21:5e:26:b3:ce
inet6 addr: fe80::221:5eff:fe26:b3ce/64 Scope:Link
venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
(lo, sit0, other VLANs ommitted).
Then I added the vlan to VE like this:
vzctl set 110 --netif_add vlan980 --save
Then I setup the VE settings like this:
(snippet from 110.conf)
IP_ADDRESS="10.0.0.2"
NETIF=" ifname=vlan980,mac=00:18:51:F6:CD:87,host_ifname=veth110.980 ,host_mac=00:18:51:70:E9:7F "
And the problem is I still cannot access the other ip on the network (PING 10.0.0.1 (10.0.0.1) 56(84) bytes of data.
From 10.0.0.2 icmp_seq=1 Destination Host Unreachable)! How to debug this??
BTW. when I assign an address from the VLAN to eth1.980 on HN it works, but VE - its not.
Thanks!
[Updated on: Sun, 26 October 2008 18:43] Report message to a moderator
|
|
|