OpenVZ Forum: Support » vzquota taking 1.2GB of actual memory upon startup

Home » General » Support » vzquota taking 1.2GB of actual memory upon startup

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

vzquota taking 1.2GB of actual memory upon startup [message #32755]

Thu, 28 August 2008 07:07

vztester
Messages: 19
Registered: August 2008

Junior Member

I have two hosts and one host when I start the only VE which 128MB of RAM it won't start and vzquota starts and takes 1.2gb of RAM.

Then I get this error when manually trying to start the VE:

Received signal: 9 in /usr/sbin/vzquota
Received signal: 9 in /usr/sbin/vzquota

Does anyone have an idea why it does this?

rtt

Report message to a moderator

Re: vzquota taking 1.2GB of actual memory upon startup [message #32764 is a reply to message #32755]

Thu, 28 August 2008 14:43

maratrus
Messages: 1495
Registered: August 2007
Location: Moscow

Senior Member

Hi,

- does host mean the same as HN?
-

Quote:

when I start the only VE

how do you start your VE?
could you please provide us with the messages that appeared?

-

Quote:

Then I get this error when manually trying to start the VE

what does it mean then? Did the previous commands successfully finish?
Does manually mean "vzctl start"? And does it differ from the manner you've tried to start ve the first time?

anyway, the exact command outputs would be very useful.

Report message to a moderator

Re: vzquota taking 1.2GB of actual memory upon startup [message #32777 is a reply to message #32755]

Thu, 28 August 2008 22:45

vztester
Messages: 19
Registered: August 2008

Junior Member

Started by:

vzctl start VEID

The messages that appeared are the ones mentioned:

Received signal: 9 in /usr/sbin/vzquota
Received signal: 9 in /usr/sbin/vzquota

Actually as soon as OpenVZ is started it tries taking up all available RAM.

I'll shed some more light, which may help.

One system is running 2Gigs of RAM, the VE starts fine on that (the VE itself is allocated on 128MB of RAM).

The system the problem is happening on, has 1.5 Gigs of RAM and the config files for OpenVZ are the same on both machines.

Is there some configuration option that makes OpenVZ try to allocate all the available memory it can? It seems this is what is happening.

As soon as OpenVZ starts it takes 1.2 -1.3 gigs of resident memory and the system swaps like crazy.

Any help would be appreciated

rtt

Report message to a moderator

Re: vzquota taking 1.2GB of actual memory upon startup [message #32778 is a reply to message #32777]

Thu, 28 August 2008 22:48

vztester
Messages: 19
Registered: August 2008

Junior Member

From vzctl.log:

2008-08-28T15:35:44-0700 vzctl : Setting CPU units: 1000
2008-08-28T15:35:44-0700 vzctl : WARNING: Settings were not saved and will be re setted to original values on next start (use --save flag)
2008-08-28T15:35:44-0700 vzctl : VE 1001 : Starting VE ...
2008-08-28T15:37:33-0700 vzctl : VE 1001 : Received signal: 9 in /usr/sbin/vzqu ota
2008-08-28T15:39:18-0700 vzctl : VE 1001 : Received signal: 9 in /usr/sbin/vzqu ota
2008-08-28T15:39:19-0700 vzctl : VE 1001 : vzquota on failed [3]
2008-08-28T15:42:33-0700 vzctl : Setting CPU units: 1000
2008-08-28T15:42:33-0700 vzctl : WARNING: Settings were not saved and will be re setted to original values on next start (use --save flag)
2008-08-28T15:42:33-0700 vzctl : VE 1001 : Starting VE ...
2008-08-28T15:44:15-0700 vzctl : VE 1001 : Received signal: 9 in /usr/sbin/vzqu ota
2008-08-28T15:46:02-0700 vzctl : VE 1001 : Received signal: 9 in /usr/sbin/vzqu ota
2008-08-28T15:46:02-0700 vzctl : VE 1001 : vzquota on failed [3]

rtt

Report message to a moderator

Re: vzquota taking 1.2GB of actual memory upon startup [message #32785 is a reply to message #32778]

Fri, 29 August 2008 08:32

maratrus
Messages: 1495
Registered: August 2007
Location: Moscow

Senior Member

Hi,

what kind of kernel do you use 64bit or 32?
and what kind of vzctl and vzquota correspond to the kernel (32/64)?

could you also increase verbosity level of vzctl?
set LOG_LEVEL and VERBOSE to 10 in /etc/vz/vz.conf file and please show the output.

[Updated on: Fri, 29 August 2008 08:36]

Report message to a moderator

Re: vzquota taking 1.2GB of actual memory upon startup [message #32811 is a reply to message #32785]

Mon, 01 September 2008 05:55

vztester
Messages: 19
Registered: August 2008

Junior Member

I think this shows there is a lack of compatibility and it is also kind of my fault.

One OS is Centos 4.6 64-bit kernel.
The other is Centos 5.2 with 32-bit kernel.

VEs created in 64bit kernel's will not work on the 32 bit host and vice versa, that's when I get the memory usage error and also the other error messages.

Is this the normal behaviour for OpenVZ?
I also tried using 64bit and i386 vzctl and vzquota with the same results.

I've also received errors like this (even though the VE worked previously, if you start it on a different host it doesn't work):

vzctl start 1001
Starting VE ...
vzquota : (warning) block_hard_limit [1153124] < block_current_usage [4194273]
vzquota : (error) path to mount point can't be read from config file,
use -p <mount_point> option

vzquota on failed [13]

======================
I can also say everything is fine with pure i386 HN's.
It seems that 64bit and 32bit HN's create containers that are not compatible.

rtt

Report message to a moderator

Re: vzquota taking 1.2GB of actual memory upon startup [message #32821 is a reply to message #32811]

Mon, 01 September 2008 11:36

maratrus
Messages: 1495
Registered: August 2007
Location: Moscow

Senior Member

Hi,

Quote:

VEs created in 64bit kernel's will not work on the 32 bit host and vice versa,

What do you have in mind?
Do you create the particular VE with "vzctl create ..." command?
And how do you migrate the particular VE to another node?
Anyway, it's not a surprise that 64-bit application doesn't work on the 32-bit node.

There might be problems when using OVZ userspace 32-bit utilities on the 64-bit node.

Report message to a moderator

Re: vzquota taking 1.2GB of actual memory upon startup [message #32838 is a reply to message #32755]

Mon, 01 September 2008 21:45

vztester
Messages: 19
Registered: August 2008

Junior Member

Hi maratrus

VE's were created with vzctl command, migration was not done with the utilities though.

I meant I hoped that a 32-bit VE could be used in a 64-bit HN with 32-bit.

I think you are correct that 32-bit utilities on a 64-bit HN are not really compatible.

Might it be possible in the future for more compatibility?

At least now I know why the strange behaviour and errors happened.

rtt

Report message to a moderator

Previous Topic:	How to sync vz user quotas?
Next Topic:	vztmpl-centos-5-2.0-3.i386.rpm

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Aug 16 12:18:12 GMT 2025

Total time taken to generate the page: 0.17137 seconds