OpenVZ Forum


Home » Mailing lists » Devel » [PATCH 1/1] signal: Introduce kill_pid_ns_info
[PATCH 1/1] signal: Introduce kill_pid_ns_info [message #32050] Thu, 17 July 2008 19:37 Go to next message
Daniel Hokka Zakrisso is currently offline  Daniel Hokka Zakrisso
Messages: 22
Registered: January 2007
Junior Member
Author: Eric W. Biederman <ebiederm@xmission.com>

Implement the basic helper function that walks all of the processes in a
pid namespace and sends them all a signal.

Both locations that could use this functions are also updated to use this
function.

I use find_ge_pid instead of for_each_process because it has a chance of
not touching every process in the system.

[daniel@hozac.com: Optimize away nr <= 1 check, against latest Linus tree]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Hokka Zakrisson <daniel@hozac.com>

diff --git a/include/linux/sched.h b/include/linux/sched.h
index ba2f859..83597f8 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1778,6 +1778,8 @@ extern void release_task(struct task_struct * p);
 extern int send_sig_info(int, struct siginfo *, struct task_struct *);
extern int force_sigsegv(int, struct task_struct *);
 extern int force_sig_info(int, struct siginfo *, struct task_struct *);
+extern int __kill_pid_ns_info(int sig, struct siginfo *info, struct
pid_namespace *ns);
+extern int kill_pid_ns_info(int sig, struct siginfo *info, struct
pid_namespace *ns);
 extern int __kill_pgrp_info(int sig, struct siginfo *info, struct pid
*pgrp);
 extern int kill_pid_info(int sig, struct siginfo *info, struct pid *pid);
extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *,
uid_t, uid_t, u32);
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 98702b4..9226423 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -153,29 +153,14 @@ void free_pid_ns(struct kref *kref)

 void zap_pid_ns_processes(struct pid_namespace *pid_ns)
 {
-	int nr;
 	int rc;

 	/*
 	 * The last thread in the cgroup-init thread group is terminating. *
Find remaining pid_ts in the namespace, signal and wait for them * to
exit.
-	 *
-	 * Note:  This signals each threads in the namespace - even those that
-	 * 	  belong to the same thread group, To avoid this, we would have -	 *
	  to walk the entire tasklist looking a processes in this
-	 * 	  namespace, but that could be unnecessarily expensive if the -	 * 	
 pid namespace has just a few processes. Or we need to
-	 * 	  maintain a tasklist for each pid namespace.
-	 *
 	 */
-	read_lock(&tasklist_lock);
-	nr = next_pidmap(pid_ns, 1);
-	while (nr > 0) {
-		kill_proc_info(SIGKILL, SEND_SIG_PRIV, nr);
-		nr = next_pidmap(pid_ns, nr);
-	}
-	read_unlock(&tasklist_lock);
+	kill_pid_ns_info(SIGKILL, SEND_SIG_PRIV, pid_ns);

 	do {
 		clear_thread_flag(TIF_SIGPENDING);
diff --git a/kernel/signal.c b/kernel/signal.c
index 6c0958e..fc42428 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1118,6 +1118,45 @@ out_unlock:
 }
 EXPORT_SYMBOL_GPL(kill_pid_info_as_uid);

+int __kill_pid_ns_info(int sig, struct siginfo *info, struct
pid_namespace *ns)
+{
+	int retval = 0, count = 0;
+	struct task_struct *p;
+	struct pid *pid;
+	int nr;
+
+	/* Since there isn't a pid namespace list of tasks use the closest +	 *
approximation we have: find_ge_pid.
+	 */
+	nr = 1;
+	while ((pid = find_ge_pid(nr + 1, ns))) {
+		int err;
+
+		nr = pid_nr_ns(pid, ns);
+		p = pid_task(pid, PIDTYPE_PID);
+		if (!p || (nr <= 1) || !thread_group_leader(p) ||
+		    same_thread_group(p, current))
+			continue;
+
+		err = group_send_sig_info(sig, info, p);
+		++count;
+		if (err != -EPERM)
+			retval = err;
+	}
+	return count ? retval : -ESRCH;
+}
+
+int kill_pid_ns_info(int sig, struct siginfo *info, struct pid_namespace
*ns)
+{
+	int retval;
+
+	read_lock(&tasklist_lock);
+	retval = __kill_pid_ns_info(sig, info, ns);
+	read_unlock(&tasklist_lock);
+
+	return retval;
+}
+
 /*
  * kill_something_info() interprets pid in interesting ways just like
kill(2).
  *
@@ -1141,18 +1180,7 @@ static int kill_something_info(int sig, struct
siginfo *info, int pid)
 		ret = __kill_pgrp_info(sig, info,
 				pid ? find_vpid(-pid) : task_pgrp(current));
 	} else {
-		int retval = 0, count = 0;
-		struct task_struct * p;
-
-		for_each_process(p) {
-			if (p->pid > 1 && !same_thread_group(p, current)) {
-				int err = group_send_sig_info(sig, info, p);
-				++count;
-				if (err != -EPERM)
-					retval = err;
-			}
-		}
-		ret = count ? retval : -ESRCH;
+		ret = __kill_pid_ns_info(sig, info, task_active_pid_ns(current));
 	}
 	read_unlock(&tasklist_lock);

-- 
1.5.5.1


_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
Re: [PATCH 1/1] signal: Introduce kill_pid_ns_info [message #32051 is a reply to message #32050] Thu, 17 July 2008 21:10 Go to previous messageGo to next message
akpm is currently offline  akpm
Messages: 224
Registered: March 2007
Senior Member
On Thu, 17 Jul 2008 21:37:36 +0200 (CEST)
"Daniel Hokka Zakrisson" <daniel@hozac.com> wrote:

> Author: Eric W. Biederman <ebiederm@xmission.com>
> 
> Implement the basic helper function that walks all of the processes in a
> pid namespace and sends them all a signal.
> 
> Both locations that could use this functions are also updated to use this
> function.
> 
> I use find_ge_pid instead of for_each_process because it has a chance of
> not touching every process in the system.
> 
> [daniel@hozac.com: Optimize away nr <= 1 check, against latest Linus tree]
> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
> Signed-off-by: Daniel Hokka Zakrisson <daniel@hozac.com>
> 
> diff --git a/include/linux/sched.h b/include/linux/sched.h
> index ba2f859..83597f8 100644
> --- a/include/linux/sched.h
> +++ b/include/linux/sched.h
> @@ -1778,6 +1778,8 @@ extern void release_task(struct task_struct * p);
>  extern int send_sig_info(int, struct siginfo *, struct task_struct *);
> extern int force_sigsegv(int, struct task_struct *);

Space-stuffed

>  extern int force_sig_info(int, struct siginfo *, struct task_struct *);
> +extern int __kill_pid_ns_info(int sig, struct siginfo *info, struct
> pid_namespace *ns);

word-wrapped

> +extern int kill_pid_ns_info(int sig, struct siginfo *info, struct
> pid_namespace *ns);
>  extern int __kill_pgrp_info(int sig, struct siginfo *info, struct pid
> *pgrp);
>  extern int kill_pid_info(int sig, struct siginfo *info, struct pid *pid);
> extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *,
> uid_t, uid_t, u32);
> diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
> index 98702b4..9226423 100644
> --- a/kernel/pid_namespace.c
> +++ b/kernel/pid_namespace.c
> @@ -153,29 +153,14 @@ void free_pid_ns(struct kref *kref)
> 
>  void zap_pid_ns_processes(struct pid_namespace *pid_ns)
>  {
> -	int nr;
>  	int rc;

but at least the tabs weren't replaced with spaces!

Fix and resend, please.
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
[PATCH] signal: Introduce kill_pid_ns_info [message #32053 is a reply to message #32051] Thu, 17 July 2008 21:54 Go to previous message
Daniel Hokka Zakrisso is currently offline  Daniel Hokka Zakrisso
Messages: 22
Registered: January 2007
Junior Member
I'm sorry Andrew, this should look better.

Author: Eric W. Biederman <ebiederm@xmission.com>

Implement the basic helper function that walks all of the processes in a
pid namespace and sends them all a signal.

Both locations that could use this functions are also updated to use this
function.

I use find_ge_pid instead of for_each_process because it has a chance of
not touching every process in the system.

[daniel@hozac.com: Optimize away nr <= 1 check, against latest Linus tree]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Hokka Zakrisson <daniel@hozac.com>
---
  include/linux/sched.h  |    2 +
  kernel/pid_namespace.c |   17 +--------------
  kernel/signal.c        |   52 ++++++++++++++++++++++++++++++++++++-----------
  3 files changed, 43 insertions(+), 28 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index ba2f859..83597f8 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1778,6 +1778,8 @@ extern void release_task(struct task_struct * p);
  extern int send_sig_info(int, struct siginfo *, struct task_struct *);
  extern int force_sigsegv(int, struct task_struct *);
  extern int force_sig_info(int, struct siginfo *, struct task_struct *);
+extern int __kill_pid_ns_info(int sig, struct siginfo *info, struct pid_namespace *ns);
+extern int kill_pid_ns_info(int sig, struct siginfo *info, struct pid_namespace *ns);
  extern int __kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp);
  extern int kill_pid_info(int sig, struct siginfo *info, struct pid *pid);
  extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *, uid_t, uid_t, u32);
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 98702b4..9226423 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -153,29 +153,14 @@ void free_pid_ns(struct kref *kref)

  void zap_pid_ns_processes(struct pid_namespace *pid_ns)
  {
-	int nr;
  	int rc;

  	/*
  	 * The last thread in the cgroup-init thread group is terminating.
  	 * Find remaining pid_ts in the namespace, signal and wait for them
  	 * to exit.
-	 *
-	 * Note:  This signals each threads in the namespace - even those that
-	 * 	  belong to the same thread group, To avoid this, we would have
-	 * 	  to walk the entire tasklist looking a processes in this
-	 * 	  namespace, but that could be unnecessarily expensive if the
-	 * 	  pid namespace has just a few processes. Or we need to
-	 * 	  maintain a tasklist for each pid namespace.
-	 *
  	 */
-	read_lock(&tasklist_lock);
-	nr = next_pidmap(pid_ns, 1);
-	while (nr > 0) {
-		kill_proc_info(SIGKILL, SEND_SIG_PRIV, nr);
-		nr = next_pidmap(pid_ns, nr);
-	}
-	read_unlock(&tasklist_lock);
+	kill_pid_ns_info(SIGKILL, SEND_SIG_PRIV, pid_ns);

  	do {
  		clear_thread_flag(TIF_SIGPENDING);
diff --git a/kernel/signal.c b/kernel/signal.c
index 6c0958e..96d469a 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1118,6 +1118,45 @@ out_unlock:
  }
  EXPORT_SYMBOL_GPL(kill_pid_info_as_uid);

+int __kill_pid_ns_info(int sig, struct siginfo *info, struct pid_namespace *ns)
+{
+	int retval = 0, count = 0;
+	struct task_struct *p;
+	struct pid *pid;
+	int nr;
+
+	/* Since there isn't a pid namespace list of tasks use the closest
+	 * approximation we have: find_ge_pid.
+	 */
+	nr = 1;
+	while ((pid = find_ge_pid(nr + 1, ns))) {
+		int err;
+
+		nr = pid_nr_ns(pid, ns);
+		p = pid_task(pid, PIDTYPE_PID);
+		if (!p || !thread_group_leader(p) ||
+		    same_thread_group(p, current))
+			continue;
+
+		err = group_send_sig_info(sig, info, p);
+		++count;
+		if (err != -EPERM)
+			retval = err;
+	}
+	return count ? retval : -ESRCH;
+}
+
+int kill_pid_ns_info(int sig, struct siginfo *info, struct pid_namespace *ns)
+{
+	int retval;
+
+	read_lock(&tasklist_lock);
+	retval = __kill_pid_ns_info(sig, info, ns);
+	read_unlock(&tasklist_lock);
+
+	return retval;
+}
+
  /*
   * kill_something_info() interprets pid in interesting ways just like kill(2).
   *
@@ -1141,18 +1180,7 @@ static int kill_something_info(int sig, struct siginfo *info, int pid)
  		ret = __kill_pgrp_info(sig, info,
  				pid ? find_vpid(-pid) : task_pgrp(current));
  	} else {
-		int retval = 0, count = 0;
-		struct task_struct * p;
-
-		for_each_process(p) {
-			if (p->pid > 1 && !same_thread_group(p, current)) {
-				int err = group_send_sig_info(sig, info, p);
-				++count;
-				if (err != -EPERM)
-					retval = err;
-			}
-		}
-		ret = count ? retval : -ESRCH;
+		ret = __kill_pid_ns_info(sig, info, task_active_pid_ns(current));
  	}
  	read_unlock(&tasklist_lock);

-- 
1.5.5.1
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
Previous Topic: [PATCH 2/2] signals: replace p->pid == 1 check with a check for task_child_reaper
Next Topic: [RFC PATCH 0/5] Resend - Use procfs to change a syscall behavior
Goto Forum:
  


Current Time: Tue Nov 19 10:31:53 GMT 2024

Total time taken to generate the page: 0.03210 seconds