Home » Mailing lists » Devel » [RFC] Transactional CGroup task attachment
[RFC] Transactional CGroup task attachment [message #31800] |
Thu, 10 July 2008 06:46 |
Paul Menage
Messages: 642 Registered: September 2006
|
Senior Member |
|
|
This is an initial design for a transactional task attachment
framework for cgroups. There are probably some potential simplications
that I've missed, particularly in the area of locking. Comments
appreciated.
The Problem
===========
Currently cgroups task movements are done in three phases
1) all subsystems in the destination cgroup get the chance to veto the
movement (via their can_attach()) callback
2) task->cgroups is updated (while holding task->alloc_lock)
3) all subsystems get an attach() callback to let them perform any
housekeeping updates
The problems with this include:
- There's no way to ensure that the result of can_attach() remains
valid up until the attach() callback, unless any invalidating
operations call cgroup_lock() to synchronize with the change. This is
fine for something like cpusets, where invalidating operations are
rare slow events like the user removing all cpus from a cpuset, or cpu
hotplug triggering removal of a cpuset's last cpu. It's not so good
for the virtual address space controller where the can_attach() check
might be that the res_counter has enough space, and an invalidating
operation might be another task in the cgroup allocating another page
of virtual address space.
- It doesn't handle the case of the proposed "cgroup.procs" file which
can move multiple threads into a cgroup in one operation; the
can_attach() and attach() calls should be able to atomically allow all
or none of the threads to move.
- it can create races around the time of the movement regarding to
which cgroup a resource charge/uncharge should be assigned (e.g.
between steps 2 and 3 new resource usage will be charged to the
destination cgroup, but step 3 might involve migrating a charge equal
to the task's resource usage from the old cgroup to the new, resulting
in over/under-charges.
Conceptual solution
===================
In ideal terms, a solution for this problem would meet the following
requirements:
- support movement of an arbitrary set of threads between an arbitrary
set of cgroups
- allow arbitrarily complex locking from the subsystems involved so
that they can synchronize against concurrent charges, etc
- allow rollback at any point in the process
But in practice that would probably be way more complex than we'd want
in the kernel. We don't want to encourage excessively-complex locking
from subsystems, and we don't need to support arbitrary task
movements.
(Hopefully!) Practical solution
=============
So here's a more practical solution, which hopefully catches the
important parts of the requirements without being quite so complex.
The restrictions are:
- only supporting movement to one destination cgroup (in the same
hierarchy, of course); if an entire process is being moved, then
potentially its threads could be coming from different source cgroups
- a subsystem may optionally fail such an attach if it can't handle
the synchronization this would entail.
- supporting moving either one thread, one entire thread group or (for
the future) "all threads". This supports the existing "tasks" file,
the proposed "procs" file and also allows scope for things like adding
a subsystem to an existing hierarchy.
- locking/checking performed in two phases - one to support sleeping
locks, and one to support spinlocks. This is to support both
subsystems that use mutexes to protect their data, and subsystems that
use spinlocks
- no locks allowed to be shared between multiple subsystems during the
transaction, with the single exception of the mmap_sem of the
thread/process being moved. This is because multiple subsystems use
the mmap_sem for synchronization, and are quite likely to be mounted
in the same hierarchy. The alternative would be to introduce a
down_read_unfair() operation that would skip ahead of waiting writers,
to safely allow a single thread to recursively lock mm->mmap_sem.
First we define the state for the transaction:
struct cgroup_attach_state {
// The thread or process being moved, NULL if moving (potentially) all threads
struct task_struct *task;
enum {
CGROUP_ATTACH_THREAD,
CGROUP_ATTACH_PROCESS,
CGROUP_ATTACH_ALL
} mode;
// The destination cgroup
struct cgroup *dest;
// The source cgroup for "task" (child threads *may* have different
groups; subsystem must handle this if it needs to)
struct cgroup *src;
// Private state for the attach operation per-subsys. Subsystems are
completely responsible for managing this
void *subsys_state[CGROUP_SUBSYS_STATE];
// "Recursive lock count" for task->mm->mmap_sem (needed if we don't
introduce down_read_unfair())
int mmap_sem_lock_count;
};
New cgroup subsystem callbacks (all optional):
-----
int prepare_attach_sleep(struct cgroup_attach_state *state);
Called during the first preparation phase for each subsystem. The
subsystem may perform any sleeping behaviour, including waiting for
mutexes and doing sleeping memory allocations, but may not disable
interrupts or take any spinlocks. Return a -ve error on failure or 0
on success. If it returns failure, then no further callbacks will be
made for this attach; if it returns success then exactly one of
abort_attach_sleep() or commit_attach() is guaranteed to be called in
the future
No two subsystems may take the same lock as part of their
prepare_attach_sleep() callback. A special case is made for mmap_sem:
if this callback needs to down_read(&state->task->mmap_sem) it should
only do so if state->mmap_sem_lock_count++ == 0. (A helper function
will be provided for this). The callback should not
write_lock(&state->task->mmap_sem).
Called with group_mutex (which prevents any other task movement
between cgroups) held plus any mutexes/semaphores taken by earlier
subsystems's callbacks.
-----
int prepare_attach_nosleep(struct cgroup_attach_state *state);
Called during the second preparation phase (assuming no subsystem
failed in the first phase). The subsystem may not sleep in any way,
but may disable interrupts or take spinlocks. Return a -ve error on
failure or 0 on success. If it returns failure, then
abort_attach_sleep() will be called; if it returns success then either
abort_attach_nosleep() followed by abort_attach_sleep() will be
called, or commit_attach() will be called
Called with cgroup_mutex and alloc_lock for task held (plus any
mutexes/semaphores taken by subsystems in the prepare_attach_nosleep()
phase, and any spinlocks taken by earlier subsystems in this phase .
If state->mode == CGROUP_ATTACH_PROCESS then alloc_lock for all
threads in task's thread_group are held. (Is this a really bad idea?
Maybe we should call this without any task->alloc_lock held?)
----
void abort_attach_sleep(struct cgroup_attach_state *state);
Called following a successful return from prepare_attach_sleep().
Indicates that the attach operation was aborted and the subsystem
should unwind any state changes made and locks taken by
prepare_attach_sleep().
Called with same locks as prepare_attach_sleep()
----
void abort_attach_nosleep(struct cgroup_attach_state *state);
Called following a successful return from prepare_attach_nosleep().
Indicates that the attach operation was aborted and the subsystem
should unwind any state changes made and locks taken by
prepare_attach_nosleep().
Called with the same locks as prepare_attach_nosleep();
----
void commit_attach(struct cgroup_attach_state *state);
Called following a successful return from prepare_attach_sleep() for a
subsystem that has no prepare_attach_nosleep(), or following a
successful return from prepare_attach_nosleep(). Indicates that the
attach operation is going ahead, and
any partially-committed state should be finalized, and any taken locks
should be released. No further callbacks will be made for this attach.
This is called immediately after updating task->cgroups (and threads
if necessary) to point to the new cgroup set.
Called with the same locks held as prepare_attach_nosleep()
Examples
==========
Here are a few examples of how you might use this. They're not
intended to be syntactically correct or compilable - they're just an
idea of what the routines might look like.
1) cpusets
cpusets (currently) uses cgroup_mutex for most of its changes that can
invalidate a task attach. thus it can assume that any checks performed
by prepare_attach_*() will remain valid without needing any additional
locking. The existing callback_mutex used to synchronize cpuset
changes can't be taken in commit_attach() since spinlocks are held at
that point. However, I think that all the current uses of
callback_mutex could actually be replaced with an rwlock, which would
be permitted to be taken during commit_attach(). The cpuset subsystem
wouldn't need to maintain any special state for the transaction. So:
- prepare_attach_nosleep(): same as existing cpuset_can_attach()
- commit_attach(): update tasks' allowed cpus; schedule memory
migration in a workqueue if necessary (since we can't take locks at
this point.
2) memrlimit
memrlimit needs to be able to ensure that:
- changes to an mm's virtual address space size can't occur
concurrently with the mm's owner moving between cgroups (including via
a change of mm ownership).
- moving the mm's owner doesn't over-commit the destination cgroup
- once the destination cgroup has been checked, additional charges
can't be made that result in the original move becoming invalid
Currently all normal charges and uncharges are done under the
protection of down_write(&mm->mmap_sem); uncharging following a change
that was charged but failed for other reasons isn't done under
mmap_sem, but isn't a critical path so could probably be changed to do
so (it wouldn't have to be all one big critical section).
Additionally, mm->owner changes are also done under
down_write(&mmap_sem). Thus holding down_read(&mmap_sem) across the
transaction is suffic
...
|
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31845 is a reply to message #31800] |
Fri, 11 July 2008 00:17 |
KAMEZAWA Hiroyuki
Messages: 463 Registered: September 2006
|
Senior Member |
|
|
Thank you for your effort.
On Wed, 9 Jul 2008 23:46:33 -0700
"Paul Menage" <menage@google.com> wrote:
> 3) memory
>
> Curently the memory cgroup only uses the mm->owner's cgroup at charge
> time, and keeps a reference to the cgroup on the page. However,
> patches have been proposed that would move all non-shared (page count
> == 1) pages to the destination cgroup when the mm->owner moves to a
> new cgroup. Since it's not possible to prevent page count changes
> without locking all mms on the system, even this transaction approach
> can't really give guarantees. However, something like the following
> would probably be suitable. It's very similar to the memrlimit
> approach, except for the fact that we have to handle the fact that the
> number of pages we finally move might not be exactly the same as the
> number of pages we thought we'd be moving.
>
> prepare_attach_sleep() {
> down_read(&mm->mmap_sem);
> if (mm->owner != state->task) return 0;
> count = count_unshared_pages(mm);
> // save the count charged to the new cgroup
> state->subsys[memcgroup_subsys_id] = (void *)count;
> if ((ret = res_counter_charge(state->dest, count)) {
> up_read(&mm->mmap_sem);
> }
> return ret;
> }
>
> commit_attach() {
> if (mm->owner == state->task) {
> final_count = move_unshared_pages(mm, state->dest);
> res_counter_uncharge(state->src, final_count);
> count = state->subsys[memcgroup_subsys_id];
> res_counter_force_charge(state->dest, final_count - count);
> }
> up_read(&mm->mmap_sem);
> }
>
> abort_attach_sleep() {
> if (mm->owner == state->task) {
> count = state->subsys[memcgroup_subsys_id];
> res_counter_uncharge(state->dest, count);
> }
> up_read(&mm->mmap_sem);
> }
>
At frist look, maybe works well. we need some special codes (to move resource)
but that's all.
My small concern is a state change between prepare_attach_sleep() ->
commit_attach(). Hmm...but as you say, we cannot do down_write(mmap_sem).
Maybe inserting some check codes to mem_cgroup_charge() to stop charge while
move is the last thing we can do.
Anyway, if unwinding is supported officially, I think we can find a way
to go.
Thanks,
-Kame
> 4) numtasks:
>
> Numtasks is different from the two memory-related controllers in that
> it may need to move charges from multiple source cgroups (for
> different threads); the memory cgroups only have to deal with the mm
> of a thread-group leader, and all threads in an attach operation are
> from the same thread_group. So numtasks has to be able to handle
> uncharging multiple source cgroups in the commit_attach() operation.
> In order to do this, it requires additional state:
>
> struct numtasks_attach_state {
> int count;
> struct cgroup *cg;
> struct numtasks_attach_state *next;
> }
>
> It will build a list of numtasks_attach_state objects, one for each
> distinct source cgroup; in the general case either there will only be
> a single thread moving or else all the threads in the thread group
> will belong to the same cgroup, in which case this list will only be a
> single element; the list is very unlikely to get to more than a small
> number of elements.
>
> The prepare_attach_sleep() function can rely on the fact that although
> tasks can fork/exit concurrently with the attach, since cgroup_mutex
> is held, no tasks can change cgroups, and therefore a complete list of
> source cgroups can be constructed.
>
> prepare_attach_sleep() {
> for each thread being moved:
> if the list doesn't yet have an entry for thread->cgroup:
> allocate new entry with cg = thread->cgroup, count = 0;
> add new entry to list
> store list in state->subsys[numtasks_subsys_id];
> return 0;
> }
>
> Then prepare_attach_nosleep() can move counts under protection of
> tasklist_lock, to prevent any forks/exits
>
> prepare_attach_nosleep() {
> read_lock(&tasklist_lock);
> for each thread being moved {
> find entry for thread->cgroup in list
> entry->count++;
> total_count++;
> }
> if ((ret = res_counter_charge(state->dest, total_count) != 0) {
> read_unlock(&tasklist_lock);
> }
> return ret;
> }
>
> commit_attach() {
> for each entry in list {
> res_counter_uncharge(entry->cg, entry->count);
> }
> read_unlock(&tasklist_lock);
> free list;
> }
>
> abort_attach_nosleep() {
> // just needs to clear up prepare_attach_nosleep()
> res_counter_uncharge(state->dest, total_count);
> read_unlock(&tasklist_lock);
> }
>
> abort_attach_sleep() {
> // just needs to clean up the list allocated in prepare_attach_sleep()
> free list;
> }
>
>
> So, thoughts? Is this just way to complex? Have I missed something
> that means this approach can't work?
>
> Paul
>
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
|
|
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31874 is a reply to message #31800] |
Fri, 11 July 2008 14:27 |
serue
Messages: 750 Registered: February 2006
|
Senior Member |
|
|
Quoting Paul Menage (menage@google.com):
> This is an initial design for a transactional task attachment
> framework for cgroups. There are probably some potential simplications
> that I've missed, particularly in the area of locking. Comments
> appreciated.
>
> The Problem
> ===========
>
> Currently cgroups task movements are done in three phases
>
> 1) all subsystems in the destination cgroup get the chance to veto the
> movement (via their can_attach()) callback
> 2) task->cgroups is updated (while holding task->alloc_lock)
> 3) all subsystems get an attach() callback to let them perform any
> housekeeping updates
>
> The problems with this include:
>
> - There's no way to ensure that the result of can_attach() remains
> valid up until the attach() callback, unless any invalidating
> operations call cgroup_lock() to synchronize with the change. This is
> fine for something like cpusets, where invalidating operations are
> rare slow events like the user removing all cpus from a cpuset, or cpu
> hotplug triggering removal of a cpuset's last cpu. It's not so good
> for the virtual address space controller where the can_attach() check
> might be that the res_counter has enough space, and an invalidating
> operation might be another task in the cgroup allocating another page
> of virtual address space.
>
> - It doesn't handle the case of the proposed "cgroup.procs" file which
> can move multiple threads into a cgroup in one operation; the
> can_attach() and attach() calls should be able to atomically allow all
> or none of the threads to move.
>
> - it can create races around the time of the movement regarding to
> which cgroup a resource charge/uncharge should be assigned (e.g.
> between steps 2 and 3 new resource usage will be charged to the
> destination cgroup, but step 3 might involve migrating a charge equal
> to the task's resource usage from the old cgroup to the new, resulting
> in over/under-charges.
>
>
> Conceptual solution
> ===================
>
> In ideal terms, a solution for this problem would meet the following
> requirements:
>
> - support movement of an arbitrary set of threads between an arbitrary
> set of cgroups
> - allow arbitrarily complex locking from the subsystems involved so
> that they can synchronize against concurrent charges, etc
> - allow rollback at any point in the process
>
> But in practice that would probably be way more complex than we'd want
> in the kernel. We don't want to encourage excessively-complex locking
> from subsystems, and we don't need to support arbitrary task
> movements.
>
>
> (Hopefully!) Practical solution
> =============
>
> So here's a more practical solution, which hopefully catches the
> important parts of the requirements without being quite so complex.
>
> The restrictions are:
>
> - only supporting movement to one destination cgroup (in the same
> hierarchy, of course); if an entire process is being moved, then
> potentially its threads could be coming from different source cgroups
> - a subsystem may optionally fail such an attach if it can't handle
> the synchronization this would entail.
>
> - supporting moving either one thread, one entire thread group or (for
> the future) "all threads". This supports the existing "tasks" file,
> the proposed "procs" file and also allows scope for things like adding
> a subsystem to an existing hierarchy.
>
> - locking/checking performed in two phases - one to support sleeping
> locks, and one to support spinlocks. This is to support both
> subsystems that use mutexes to protect their data, and subsystems that
> use spinlocks
>
> - no locks allowed to be shared between multiple subsystems during the
> transaction, with the single exception of the mmap_sem of the
> thread/process being moved. This is because multiple subsystems use
> the mmap_sem for synchronization, and are quite likely to be mounted
> in the same hierarchy. The alternative would be to introduce a
> down_read_unfair() operation that would skip ahead of waiting writers,
> to safely allow a single thread to recursively lock mm->mmap_sem.
>
> First we define the state for the transaction:
>
> struct cgroup_attach_state {
>
> // The thread or process being moved, NULL if moving (potentially) all threads
> struct task_struct *task;
> enum {
> CGROUP_ATTACH_THREAD,
> CGROUP_ATTACH_PROCESS,
> CGROUP_ATTACH_ALL
> } mode;
>
> // The destination cgroup
> struct cgroup *dest;
>
> // The source cgroup for "task" (child threads *may* have different
> groups; subsystem must handle this if it needs to)
> struct cgroup *src;
>
> // Private state for the attach operation per-subsys. Subsystems are
> completely responsible for managing this
> void *subsys_state[CGROUP_SUBSYS_STATE];
>
> // "Recursive lock count" for task->mm->mmap_sem (needed if we don't
> introduce down_read_unfair())
> int mmap_sem_lock_count;
> };
>
> New cgroup subsystem callbacks (all optional):
>
> -----
>
> int prepare_attach_sleep(struct cgroup_attach_state *state);
>
> Called during the first preparation phase for each subsystem. The
> subsystem may perform any sleeping behaviour, including waiting for
> mutexes and doing sleeping memory allocations, but may not disable
> interrupts or take any spinlocks. Return a -ve error on failure or 0
> on success. If it returns failure, then no further callbacks will be
> made for this attach; if it returns success then exactly one of
> abort_attach_sleep() or commit_attach() is guaranteed to be called in
> the future
>
> No two subsystems may take the same lock as part of their
> prepare_attach_sleep() callback. A special case is made for mmap_sem:
> if this callback needs to down_read(&state->task->mmap_sem) it should
> only do so if state->mmap_sem_lock_count++ == 0. (A helper function
> will be provided for this). The callback should not
> write_lock(&state->task->mmap_sem).
>
> Called with group_mutex (which prevents any other task movement
> between cgroups) held plus any mutexes/semaphores taken by earlier
> subsystems's callbacks.
>
> -----
>
> int prepare_attach_nosleep(struct cgroup_attach_state *state);
>
> Called during the second preparation phase (assuming no subsystem
> failed in the first phase). The subsystem may not sleep in any way,
> but may disable interrupts or take spinlocks. Return a -ve error on
> failure or 0 on success. If it returns failure, then
> abort_attach_sleep() will be called; if it returns success then either
> abort_attach_nosleep() followed by abort_attach_sleep() will be
> called, or commit_attach() will be called
>
> Called with cgroup_mutex and alloc_lock for task held (plus any
> mutexes/semaphores taken by subsystems in the prepare_attach_nosleep()
> phase, and any spinlocks taken by earlier subsystems in this phase .
> If state->mode == CGROUP_ATTACH_PROCESS then alloc_lock for all
> threads in task's thread_group are held. (Is this a really bad idea?
> Maybe we should call this without any task->alloc_lock held?)
>
> ----
>
> void abort_attach_sleep(struct cgroup_attach_state *state);
>
> Called following a successful return from prepare_attach_sleep().
> Indicates that the attach operation was aborted and the subsystem
> should unwind any state changes made and locks taken by
> prepare_attach_sleep().
>
> Called with same locks as prepare_attach_sleep()
>
> ----
>
> void abort_attach_nosleep(struct cgroup_attach_state *state);
>
> Called following a successful return from prepare_attach_nosleep().
> Indicates that the attach operation was aborted and the subsystem
> should unwind any state changes made and locks taken by
> prepare_attach_nosleep().
>
> Called with the same locks as prepare_attach_nosleep();
>
> ----
>
> void commit_attach(struct cgroup_attach_state *state);
>
> Called following a successful return from prepare_attach_sleep() for a
> subsystem that has no prepare_attach_nosleep(), or following a
> successful return from prepare_attach_nosleep(). Indicates that the
> attach operation is going ahead, and
> any partially-committed state should be finalized, and any taken locks
> should be released. No further callbacks will be made for this attach.
>
> This is called immediately after updating task->cgroups (and threads
> if necessary) to point to the new cgroup set.
>
> Called with the same locks held as prepare_attach_nosleep()
>
>
> Examples
> ==========
>
> Here are a few examples of how you might use this. They're not
> intended to be syntactically correct or compilable - they're just an
> idea of what the routines might look like.
>
>
> 1) cpusets
>
> cpusets (currently) uses cgroup_mutex for most of its changes that can
> invalidate a task attach. thus it can assume that any checks performed
> by prepare_attach_*() will remain valid without needing any additional
> locking. The existing callback_mutex used to synchronize cpuset
> changes can't be taken in commit_attach() since spinlocks are held at
> that point. However, I think that all the current uses of
> callback_mutex could actually be replaced with an rwlock, which would
> be permitted to be taken during commit_attach(). The cpuset subsystem
> wouldn't need to maintain
...
|
|
|
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31881 is a reply to message #31800] |
Fri, 11 July 2008 16:12 |
Balbir Singh
Messages: 491 Registered: August 2006
|
Senior Member |
|
|
Paul Menage wrote:
> This is an initial design for a transactional task attachment
> framework for cgroups. There are probably some potential simplications
> that I've missed, particularly in the area of locking. Comments
> appreciated.
>
> The Problem
> ===========
>
> Currently cgroups task movements are done in three phases
>
> 1) all subsystems in the destination cgroup get the chance to veto the
> movement (via their can_attach()) callback
> 2) task->cgroups is updated (while holding task->alloc_lock)
> 3) all subsystems get an attach() callback to let them perform any
> housekeeping updates
>
> The problems with this include:
>
> - There's no way to ensure that the result of can_attach() remains
> valid up until the attach() callback, unless any invalidating
> operations call cgroup_lock() to synchronize with the change. This is
> fine for something like cpusets, where invalidating operations are
> rare slow events like the user removing all cpus from a cpuset, or cpu
> hotplug triggering removal of a cpuset's last cpu. It's not so good
> for the virtual address space controller where the can_attach() check
> might be that the res_counter has enough space, and an invalidating
> operation might be another task in the cgroup allocating another page
> of virtual address space.
>
Precisely!
> - It doesn't handle the case of the proposed "cgroup.procs" file which
> can move multiple threads into a cgroup in one operation; the
> can_attach() and attach() calls should be able to atomically allow all
> or none of the threads to move.
>
> - it can create races around the time of the movement regarding to
> which cgroup a resource charge/uncharge should be assigned (e.g.
> between steps 2 and 3 new resource usage will be charged to the
> destination cgroup, but step 3 might involve migrating a charge equal
> to the task's resource usage from the old cgroup to the new, resulting
> in over/under-charges.
>
>
> Conceptual solution
> ===================
>
> In ideal terms, a solution for this problem would meet the following
> requirements:
>
> - support movement of an arbitrary set of threads between an arbitrary
> set of cgroups
> - allow arbitrarily complex locking from the subsystems involved so
> that they can synchronize against concurrent charges, etc
> - allow rollback at any point in the process
>
> But in practice that would probably be way more complex than we'd want
> in the kernel. We don't want to encourage excessively-complex locking
> from subsystems, and we don't need to support arbitrary task
> movements.
>
>
> (Hopefully!) Practical solution
> =============
>
> So here's a more practical solution, which hopefully catches the
> important parts of the requirements without being quite so complex.
>
> The restrictions are:
>
> - only supporting movement to one destination cgroup (in the same
> hierarchy, of course); if an entire process is being moved, then
> potentially its threads could be coming from different source cgroups
> - a subsystem may optionally fail such an attach if it can't handle
> the synchronization this would entail.
>
> - supporting moving either one thread, one entire thread group or (for
> the future) "all threads". This supports the existing "tasks" file,
> the proposed "procs" file and also allows scope for things like adding
> a subsystem to an existing hierarchy.
>
> - locking/checking performed in two phases - one to support sleeping
> locks, and one to support spinlocks. This is to support both
> subsystems that use mutexes to protect their data, and subsystems that
> use spinlocks
>
> - no locks allowed to be shared between multiple subsystems during the
> transaction, with the single exception of the mmap_sem of the
> thread/process being moved. This is because multiple subsystems use
> the mmap_sem for synchronization, and are quite likely to be mounted
> in the same hierarchy. The alternative would be to introduce a
> down_read_unfair() operation that would skip ahead of waiting writers,
> to safely allow a single thread to recursively lock mm->mmap_sem.
>
This would ideally be recursive mutexes, Linus does not like recursive mutexes.
Adding an unfair variant would mean that we need to support a more generic
locking class.
> First we define the state for the transaction:
>
> struct cgroup_attach_state {
>
> // The thread or process being moved, NULL if moving (potentially) all threads
> struct task_struct *task;
> enum {
> CGROUP_ATTACH_THREAD,
> CGROUP_ATTACH_PROCESS,
> CGROUP_ATTACH_ALL
> } mode;
>
> // The destination cgroup
> struct cgroup *dest;
>
> // The source cgroup for "task" (child threads *may* have different
> groups; subsystem must handle this if it needs to)
> struct cgroup *src;
>
> // Private state for the attach operation per-subsys. Subsystems are
> completely responsible for managing this
> void *subsys_state[CGROUP_SUBSYS_STATE];
>
> // "Recursive lock count" for task->mm->mmap_sem (needed if we don't
> introduce down_read_unfair())
> int mmap_sem_lock_count;
> };
>
> New cgroup subsystem callbacks (all optional):
>
> -----
>
> int prepare_attach_sleep(struct cgroup_attach_state *state);
>
Is _sleep really required to be specfied? The function name sounds as if the
callback processor will sleep.
> Called during the first preparation phase for each subsystem. The
> subsystem may perform any sleeping behaviour, including waiting for
> mutexes and doing sleeping memory allocations, but may not disable
> interrupts or take any spinlocks. Return a -ve error on failure or 0
> on success. If it returns failure, then no further callbacks will be
> made for this attach; if it returns success then exactly one of
> abort_attach_sleep() or commit_attach() is guaranteed to be called in
> the future
>
> No two subsystems may take the same lock as part of their
> prepare_attach_sleep() callback. A special case is made for mmap_sem:
> if this callback needs to down_read(&state->task->mmap_sem) it should
> only do so if state->mmap_sem_lock_count++ == 0. (A helper function
> will be provided for this). The callback should not
> write_lock(&state->task->mmap_sem).
>
> Called with group_mutex (which prevents any other task movement
> between cgroups) held plus any mutexes/semaphores taken by earlier
> subsystems's callbacks.
>
This sounds almost like the BKL for cgroups :) I see where you are going with
this, but I am afraid the implementation and rules sound complex. It will be
hard to verify that two subsystems are not going to take the same lock. I would
rather prefer to do the following
1. Prepare_attach() the subsystem does it's or fails
2. If someone failed, send out failed notifications to successfull callbacks
3. On receiving a failed notification (due to a different cgroup failure),
clients undo their operation (done in prepare_attach())
4. If all was successful, move the task and call attached() after the task is
attached.
[snip]
>
> So, thoughts? Is this just way to complex? Have I missed something
> that means this approach can't work?
>
I read through the rest of it. The sleep/nosleep might make sense (to help the
task acquire the type of lock it wants to acquire), but isn't sleep a generic
case for nosleep as well?
Can we manage with steps I've listed above?
--
Warm Regards,
Balbir Singh
Linux Technology Center
IBM, ISTL
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31885 is a reply to message #31881] |
Fri, 11 July 2008 20:41 |
Paul Menage
Messages: 642 Registered: September 2006
|
Senior Member |
|
|
On Fri, Jul 11, 2008 at 9:12 AM, Balbir Singh <balbir@linux.vnet.ibm.com> wrote:
>
> This would ideally be recursive mutexes, Linus does not like recursive mutexes.
But we already have them in function, if not in name, with things like
cpu_hotplug.lock, which is an open-coded reader-writer mutex with
recursion.
>>
>> int prepare_attach_sleep(struct cgroup_attach_state *state);
>>
>
> Is _sleep really required to be specfied? The function name sounds as if the
> callback processor will sleep.
I wasn't quite sure about the name of that method either. We could
call it prepare_attach_maysleep(); just prepare_attach() seems a
little under-descriptive.
>> Called with group_mutex (which prevents any other task movement
>> between cgroups) held plus any mutexes/semaphores taken by earlier
>> subsystems's callbacks.
>>
>
> This sounds almost like the BKL for cgroups :)
Yes, cgroup_mutex is indeed currently the BKL for cgroups. I'm working
separately to reduce that with things like the per-subsystem
hierarchy_mutex, which will also protect against task movements.
>
> 1. Prepare_attach() the subsystem does it's or fails
Did you miss a word here?
> 2. If someone failed, send out failed notifications to successfull callbacks
> 3. On receiving a failed notification (due to a different cgroup failure),
> clients undo their operation (done in prepare_attach())
> 4. If all was successful, move the task and call attached() after the task is
> attached.
That's pretty much what we have - except that I've got two
prepare_attach() methods to handle the case that some subsystems might
need mutexes and others might need spinlocks in order to handle
synchronization between the move and their resource charge/uncharge
mechanisms - because any mutexes (and memory allocations) need to be
handled before spinlocks.
>
> I read through the rest of it. The sleep/nosleep might make sense (to help the
> task acquire the type of lock it wants to acquire), but isn't sleep a generic
> case for nosleep as well?
Can you clarify what you mean by that?
Paul
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31890 is a reply to message #31800] |
Sat, 12 July 2008 00:03 |
Matt Helsley
Messages: 86 Registered: August 2006
|
Member |
|
|
On Wed, 2008-07-09 at 23:46 -0700, Paul Menage wrote:
> This is an initial design for a transactional task attachment
> framework for cgroups. There are probably some potential simplications
> that I've missed, particularly in the area of locking. Comments
> appreciated.
>
> The Problem
> ===========
>
> Currently cgroups task movements are done in three phases
>
> 1) all subsystems in the destination cgroup get the chance to veto the
> movement (via their can_attach()) callback
> 2) task->cgroups is updated (while holding task->alloc_lock)
> 3) all subsystems get an attach() callback to let them perform any
> housekeeping updates
>
> The problems with this include:
>
> - There's no way to ensure that the result of can_attach() remains
> valid up until the attach() callback, unless any invalidating
> operations call cgroup_lock() to synchronize with the change. This is
> fine for something like cpusets, where invalidating operations are
> rare slow events like the user removing all cpus from a cpuset, or cpu
> hotplug triggering removal of a cpuset's last cpu. It's not so good
> for the virtual address space controller where the can_attach() check
> might be that the res_counter has enough space, and an invalidating
> operation might be another task in the cgroup allocating another page
> of virtual address space.
>
> - It doesn't handle the case of the proposed "cgroup.procs" file which
> can move multiple threads into a cgroup in one operation; the
> can_attach() and attach() calls should be able to atomically allow all
> or none of the threads to move.
>
> - it can create races around the time of the movement regarding to
> which cgroup a resource charge/uncharge should be assigned (e.g.
> between steps 2 and 3 new resource usage will be charged to the
> destination cgroup, but step 3 might involve migrating a charge equal
> to the task's resource usage from the old cgroup to the new, resulting
> in over/under-charges.
I agree with Balbir: this is a good description of the problems.
>
> Conceptual solution
> ===================
>
> In ideal terms, a solution for this problem would meet the following
> requirements:
>
> - support movement of an arbitrary set of threads between an arbitrary
> set of cgroups
>
> - allow arbitrarily complex locking from the subsystems involved so
> that they can synchronize against concurrent charges, etc
> - allow rollback at any point in the process
>
> But in practice that would probably be way more complex than we'd want
> in the kernel. We don't want to encourage excessively-complex locking
> from subsystems, and we don't need to support arbitrary task
> movements.
>
>
> (Hopefully!) Practical solution
> =============
>
> So here's a more practical solution, which hopefully catches the
> important parts of the requirements without being quite so complex.
>
> The restrictions are:
>
> - only supporting movement to one destination cgroup (in the same
> hierarchy, of course); if an entire process is being moved, then
> potentially its threads could be coming from different source cgroups
> - a subsystem may optionally fail such an attach if it can't handle
> the synchronization this would entail.
>
> - supporting moving either one thread, one entire thread group or (for
> the future) "all threads". This supports the existing "tasks" file,
> the proposed "procs" file and also allows scope for things like adding
> a subsystem to an existing hierarchy.
>
> - locking/checking performed in two phases - one to support sleeping
> locks, and one to support spinlocks. This is to support both
> subsystems that use mutexes to protect their data, and subsystems that
> use spinlocks
>
> - no locks allowed to be shared between multiple subsystems during the
> transaction, with the single exception of the mmap_sem of the
> thread/process being moved. This is because multiple subsystems use
> the mmap_sem for synchronization, and are quite likely to be mounted
> in the same hierarchy. The alternative would be to introduce a
> down_read_unfair() operation that would skip ahead of waiting writers,
> to safely allow a single thread to recursively lock mm->mmap_sem.
>
> First we define the state for the transaction:
>
> struct cgroup_attach_state {
nit: How about naming it cgroup_attach_request or
cgroup_attach_request_state? I suggest this because it's not really
"state" that's kept beyond the prepare-then-(commit|abort) sequence.
> // The thread or process being moved, NULL if moving (potentially) all threads
> struct task_struct *task;
> enum {
> CGROUP_ATTACH_THREAD,
> CGROUP_ATTACH_PROCESS,
> CGROUP_ATTACH_ALL
> } mode;
>
>
> // The destination cgroup
> struct cgroup *dest;
>
> // The source cgroup for "task" (child threads *may* have different
> groups; subsystem must handle this if it needs to)
> struct cgroup *src;
>
> // Private state for the attach operation per-subsys. Subsystems are
> completely responsible for managing this
> void *subsys_state[CGROUP_SUBSYS_STATE];
>
> // "Recursive lock count" for task->mm->mmap_sem (needed if we don't
> introduce down_read_unfair())
> int mmap_sem_lock_count;
> };
>
> New cgroup subsystem callbacks (all optional):
>
> -----
>
> int prepare_attach_sleep(struct cgroup_attach_state *state);
>
> Called during the first preparation phase for each subsystem. The
> subsystem may perform any sleeping behaviour, including waiting for
> mutexes and doing sleeping memory allocations, but may not disable
> interrupts or take any spinlocks. Return a -ve error on failure or 0
> on success. If it returns failure, then no further callbacks will be
> made for this attach; if it returns success then exactly one of
> abort_attach_sleep() or commit_attach() is guaranteed to be called in
> the future
>
> No two subsystems may take the same lock as part of their
> prepare_attach_sleep() callback. A special case is made for mmap_sem:
> if this callback needs to down_read(&state->task->mmap_sem) it should
> only do so if state->mmap_sem_lock_count++ == 0. (A helper function
> will be provided for this). The callback should not
> write_lock(&state->task->mmap_sem).
What about the task->alloc_lock? Might that need to be taken by multiple
subsystems? See my next comment.
> Called with group_mutex (which prevents any other task movement
> between cgroups) held plus any mutexes/semaphores taken by earlier
> subsystems's callbacks.
>
> -----
>
> int prepare_attach_nosleep(struct cgroup_attach_state *state);
>
> Called during the second preparation phase (assuming no subsystem
> failed in the first phase). The subsystem may not sleep in any way,
> but may disable interrupts or take spinlocks. Return a -ve error on
> failure or 0 on success. If it returns failure, then
> abort_attach_sleep() will be called; if it returns success then either
> abort_attach_nosleep() followed by abort_attach_sleep() will be
> called, or commit_attach() will be called
>
> Called with cgroup_mutex and alloc_lock for task held (plus any
> mutexes/semaphores taken by subsystems in the prepare_attach_nosleep()
> phase, and any spinlocks taken by earlier subsystems in this phase .
> If state->mode == CGROUP_ATTACH_PROCESS then alloc_lock for all
> threads in task's thread_group are held. (Is this a really bad idea?
> Maybe we should call this without any task->alloc_lock held?)
With task->alloc_lock held would avoid the case where multiple
subsystems need it (assuming the case exists of course).
> ----
>
> void abort_attach_sleep(struct cgroup_attach_state *state);
>
> Called following a successful return from prepare_attach_sleep().
> Indicates that the attach operation was aborted and the subsystem
> should unwind any state changes made and locks taken by
> prepare_attach_sleep().
>
> Called with same locks as prepare_attach_sleep()
>
> ----
>
> void abort_attach_nosleep(struct cgroup_attach_state *state);
>
> Called following a successful return from prepare_attach_nosleep().
> Indicates that the attach operation was aborted and the subsystem
> should unwind any state changes made and locks taken by
> prepare_attach_nosleep().
>
> Called with the same locks as prepare_attach_nosleep();
>
> ----
>
> void commit_attach(struct cgroup_attach_state *state);
>
> Called following a successful return from prepare_attach_sleep() for a
> subsystem that has no prepare_attach_nosleep(), or following a
> successful return from prepare_attach_nosleep(). Indicates that the
> attach operation is going ahead, and
> any partially-committed state should be finalized, and any taken locks
> should be released. No further callbacks will be made for this attach.
>
> This is called immediately after updating task->cgroups (and threads
> if necessary) to point to the new cgroup set.
>
> Called with the same locks held as prepare_attach_nosleep()
Rather than describing what might be called later for each API entry
separately it might be simpler to prefix the whole API/protocol
description with something like:
======
A successful return from prepare_X will cause abort_X to be called if
any of the prepatory calls fail. (where X is either sleep or nosleep)
A successful return from prepare_X will cause commit to be called if all
...
|
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31892 is a reply to message #31891] |
Sat, 12 July 2008 00:48 |
Matt Helsley
Messages: 86 Registered: August 2006
|
Member |
|
|
On Fri, 2008-07-11 at 17:18 -0700, Paul Menage wrote:
> On Fri, Jul 11, 2008 at 5:03 PM, Matt Helsley <matthltc@us.ibm.com> wrote:
> >> struct cgroup_attach_state {
> >
> > nit: How about naming it cgroup_attach_request or
> > cgroup_attach_request_state? I suggest this because it's not really
> > "state" that's kept beyond the prepare-then-(commit|abort) sequence.
>
> State doesn't have to be long-lived to be state. But I'm not too
> worried about the exact name for it, if people have other preferences.
>
> >
> > What about the task->alloc_lock? Might that need to be taken by multiple
> > subsystems? See my next comment.
>
> My thought was that cgroups would take that anyway prior to calling
> prepare_attach_nosleep(), since it's a requirement for changing
> task->cgroups anyway.
Yeah, that makes sense.
> >
> > Rather than describing what might be called later for each API entry
> > separately it might be simpler to prefix the whole API/protocol
> > description with something like:
> > ======
> > A successful return from prepare_X will cause abort_X to be called if
> > any of the prepatory calls fail. (where X is either sleep or nosleep)
> >
> > A successful return from prepare_X will cause commit to be called if all
> > of the prepatory calls succeed. (where X is either sleep or nosleep)
> >
> > Otherwise no calls to abort_X or commit will be made. (where X is either
> > sleep or nosleep)
>
> I'll play with working that into the description.
>
> > I think that's correct based on your descriptions. Of course changing
> > this only makes sense if this proposal will go into Documentation/ in
> > some form..
>
> Yes, we'd definitely need to document this in some detail.
>
> >
> > Allowing prepare_X to hold locks when it has exitted seems ripe for
> > introducing two separate subsystems that inadvertently take locks out of
> > order.
>
> Yes, but I'm not sure that there's much that we can do about that. If
> we want to guarantee to be able to rollback one subsystem when a later
> subsystem fails then we have to let the earlier subsystems continue to
> hold locks. Or is this too ambitious a goal to support?
I can't see a better way to support that goal and it doesn't seem
overly ambitious to me. Just needs a somewhat specific test
configuration for new subsystem patches to detect the deadlock issue.
Cheers,
-Matt Helsley
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
|
|
|
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31908 is a reply to message #31845] |
Mon, 14 July 2008 06:28 |
Daisuke Nishimura
Messages: 54 Registered: March 2008
|
Member |
|
|
On Fri, 11 Jul 2008 09:20:58 +0900, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> Thank you for your effort.
>
> On Wed, 9 Jul 2008 23:46:33 -0700
> "Paul Menage" <menage@google.com> wrote:
> > 3) memory
> >
> > Curently the memory cgroup only uses the mm->owner's cgroup at charge
> > time, and keeps a reference to the cgroup on the page. However,
> > patches have been proposed that would move all non-shared (page count
> > == 1) pages to the destination cgroup when the mm->owner moves to a
> > new cgroup. Since it's not possible to prevent page count changes
> > without locking all mms on the system, even this transaction approach
> > can't really give guarantees. However, something like the following
> > would probably be suitable. It's very similar to the memrlimit
> > approach, except for the fact that we have to handle the fact that the
> > number of pages we finally move might not be exactly the same as the
> > number of pages we thought we'd be moving.
> >
> > prepare_attach_sleep() {
> > down_read(&mm->mmap_sem);
> > if (mm->owner != state->task) return 0;
> > count = count_unshared_pages(mm);
> > // save the count charged to the new cgroup
> > state->subsys[memcgroup_subsys_id] = (void *)count;
> > if ((ret = res_counter_charge(state->dest, count)) {
> > up_read(&mm->mmap_sem);
> > }
> > return ret;
> > }
> >
> > commit_attach() {
> > if (mm->owner == state->task) {
> > final_count = move_unshared_pages(mm, state->dest);
> > res_counter_uncharge(state->src, final_count);
> > count = state->subsys[memcgroup_subsys_id];
> > res_counter_force_charge(state->dest, final_count - count);
> > }
> > up_read(&mm->mmap_sem);
> > }
> >
> > abort_attach_sleep() {
> > if (mm->owner == state->task) {
> > count = state->subsys[memcgroup_subsys_id];
> > res_counter_uncharge(state->dest, count);
> > }
> > up_read(&mm->mmap_sem);
> > }
> >
>
> At frist look, maybe works well. we need some special codes (to move resource)
> but that's all.
>
> My small concern is a state change between prepare_attach_sleep() ->
> commit_attach(). Hmm...but as you say, we cannot do down_write(mmap_sem).
> Maybe inserting some check codes to mem_cgroup_charge() to stop charge while
> move is the last thing we can do.
>
I have two comments.
- I think page reclaiming code decreases the memory charge
without holding mmap_sem(e.g. try_to_unmap(), __remove_mapping()).
Shouldn't we handle these cases?
- When swap controller is merged, I should implement
prepare_attach_nosleep() which holds swap_lock.
> Anyway, if unwinding is supported officially, I think we can find a way
> to go.
>
I think so too.
Thanks,
Daisuke Nishimura.
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31911 is a reply to message #31908] |
Mon, 14 July 2008 07:50 |
KAMEZAWA Hiroyuki
Messages: 463 Registered: September 2006
|
Senior Member |
|
|
On Mon, 14 Jul 2008 15:28:22 +0900
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> wrote:
> On Fri, 11 Jul 2008 09:20:58 +0900, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> > Thank you for your effort.
> >
> > On Wed, 9 Jul 2008 23:46:33 -0700
> > "Paul Menage" <menage@google.com> wrote:
> > > 3) memory
> > >
> > > Curently the memory cgroup only uses the mm->owner's cgroup at charge
> > > time, and keeps a reference to the cgroup on the page. However,
> > > patches have been proposed that would move all non-shared (page count
> > > == 1) pages to the destination cgroup when the mm->owner moves to a
> > > new cgroup. Since it's not possible to prevent page count changes
> > > without locking all mms on the system, even this transaction approach
> > > can't really give guarantees. However, something like the following
> > > would probably be suitable. It's very similar to the memrlimit
> > > approach, except for the fact that we have to handle the fact that the
> > > number of pages we finally move might not be exactly the same as the
> > > number of pages we thought we'd be moving.
> > >
> > > prepare_attach_sleep() {
> > > down_read(&mm->mmap_sem);
> > > if (mm->owner != state->task) return 0;
> > > count = count_unshared_pages(mm);
> > > // save the count charged to the new cgroup
> > > state->subsys[memcgroup_subsys_id] = (void *)count;
> > > if ((ret = res_counter_charge(state->dest, count)) {
> > > up_read(&mm->mmap_sem);
> > > }
> > > return ret;
> > > }
> > >
> > > commit_attach() {
> > > if (mm->owner == state->task) {
> > > final_count = move_unshared_pages(mm, state->dest);
> > > res_counter_uncharge(state->src, final_count);
> > > count = state->subsys[memcgroup_subsys_id];
> > > res_counter_force_charge(state->dest, final_count - count);
> > > }
> > > up_read(&mm->mmap_sem);
> > > }
> > >
> > > abort_attach_sleep() {
> > > if (mm->owner == state->task) {
> > > count = state->subsys[memcgroup_subsys_id];
> > > res_counter_uncharge(state->dest, count);
> > > }
> > > up_read(&mm->mmap_sem);
> > > }
> > >
> >
> > At frist look, maybe works well. we need some special codes (to move resource)
> > but that's all.
> >
> > My small concern is a state change between prepare_attach_sleep() ->
> > commit_attach(). Hmm...but as you say, we cannot do down_write(mmap_sem).
> > Maybe inserting some check codes to mem_cgroup_charge() to stop charge while
> > move is the last thing we can do.
> >
> I have two comments.
>
> - I think page reclaiming code decreases the memory charge
> without holding mmap_sem(e.g. try_to_unmap(), __remove_mapping()).
> Shouldn't we handle these cases?
I think decreasing is not problem, here.
I don't like handle mmap->sem by some unclear way. I'd like to add some flag to
mm_struct or page_struct to stop(skip/avoid) charge/uncharge while task move.
> - When swap controller is merged, I should implement
> prepare_attach_nosleep() which holds swap_lock.
>
just making add_to_swap() fail during move is not enough ?
Thanks,
-Kame
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
|
|
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31917 is a reply to message #31911] |
Mon, 14 July 2008 12:36 |
Daisuke Nishimura
Messages: 54 Registered: March 2008
|
Member |
|
|
On Mon, 14 Jul 2008 16:54:44 +0900, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> On Mon, 14 Jul 2008 15:28:22 +0900
> Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> wrote:
>
> > On Fri, 11 Jul 2008 09:20:58 +0900, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> > > Thank you for your effort.
> > >
> > > On Wed, 9 Jul 2008 23:46:33 -0700
> > > "Paul Menage" <menage@google.com> wrote:
> > > > 3) memory
> > > >
> > > > Curently the memory cgroup only uses the mm->owner's cgroup at charge
> > > > time, and keeps a reference to the cgroup on the page. However,
> > > > patches have been proposed that would move all non-shared (page count
> > > > == 1) pages to the destination cgroup when the mm->owner moves to a
> > > > new cgroup. Since it's not possible to prevent page count changes
> > > > without locking all mms on the system, even this transaction approach
> > > > can't really give guarantees. However, something like the following
> > > > would probably be suitable. It's very similar to the memrlimit
> > > > approach, except for the fact that we have to handle the fact that the
> > > > number of pages we finally move might not be exactly the same as the
> > > > number of pages we thought we'd be moving.
> > > >
> > > > prepare_attach_sleep() {
> > > > down_read(&mm->mmap_sem);
> > > > if (mm->owner != state->task) return 0;
> > > > count = count_unshared_pages(mm);
> > > > // save the count charged to the new cgroup
> > > > state->subsys[memcgroup_subsys_id] = (void *)count;
> > > > if ((ret = res_counter_charge(state->dest, count)) {
> > > > up_read(&mm->mmap_sem);
> > > > }
> > > > return ret;
> > > > }
> > > >
> > > > commit_attach() {
> > > > if (mm->owner == state->task) {
> > > > final_count = move_unshared_pages(mm, state->dest);
> > > > res_counter_uncharge(state->src, final_count);
> > > > count = state->subsys[memcgroup_subsys_id];
> > > > res_counter_force_charge(state->dest, final_count - count);
> > > > }
> > > > up_read(&mm->mmap_sem);
> > > > }
> > > >
> > > > abort_attach_sleep() {
> > > > if (mm->owner == state->task) {
> > > > count = state->subsys[memcgroup_subsys_id];
> > > > res_counter_uncharge(state->dest, count);
> > > > }
> > > > up_read(&mm->mmap_sem);
> > > > }
> > > >
> > >
> > > At frist look, maybe works well. we need some special codes (to move resource)
> > > but that's all.
> > >
> > > My small concern is a state change between prepare_attach_sleep() ->
> > > commit_attach(). Hmm...but as you say, we cannot do down_write(mmap_sem).
> > > Maybe inserting some check codes to mem_cgroup_charge() to stop charge while
> > > move is the last thing we can do.
> > >
> > I have two comments.
> >
> > - I think page reclaiming code decreases the memory charge
> > without holding mmap_sem(e.g. try_to_unmap(), __remove_mapping()).
> > Shouldn't we handle these cases?
>
> I think decreasing is not problem, here.
> I don't like handle mmap->sem by some unclear way. I'd like to add some flag to
> mm_struct or page_struct to stop(skip/avoid) charge/uncharge while task move.
>
It would be a good idea.
> > - When swap controller is merged, I should implement
> > prepare_attach_nosleep() which holds swap_lock.
> >
> just making add_to_swap() fail during move is not enough ?
>
This can only avoid increasing, I think.
I thought it would be better to avoid decreasing too,
just because some special handling on uncharged usage
would be needed in rollback or commit.
Anyway, I think it depends on how to implement move and rollback,
and I will consider more.
Thank you for your suggestion.
Thanks,
Daisuke Nishimura.
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
|
|
|
Re: [RFC] Transactional CGroup task attachment [message #31926 is a reply to message #31908] |
Mon, 14 July 2008 19:16 |
Paul Menage
Messages: 642 Registered: September 2006
|
Senior Member |
|
|
On Sun, Jul 13, 2008 at 11:28 PM, Daisuke Nishimura
<nishimura@mxp.nes.nec.co.jp> wrote:
>
> - I think page reclaiming code decreases the memory charge
> without holding mmap_sem(e.g. try_to_unmap(), __remove_mapping()).
> Shouldn't we handle these cases?
The prepare_attach_nosleep() call could take the res_counter's
spinlock, which would lock out all other charges and uncharges until
the transaction was completed; that might be enough for what you want.
We'd need to export lock/unlock functions from res_counter.
Paul
_______________________________________________
Containers mailing list
Containers@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/containers
|
|
|
Goto Forum:
Current Time: Thu Aug 15 07:19:36 GMT 2024
Total time taken to generate the page: 0.02936 seconds
|