| Re: OpenVZ problem non stop [message #29952 is a reply to message #29927] |
Thu, 01 May 2008 06:10   |
jyrppa
Messages: 7
Registered: January 2008
|
Junior Member |
|
|
>P.S. You should set an IP address only to br0 interface not to the eth0 interface.
Yes, now the configuration looks like:
2: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
4: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
6: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:0d:9d:96:dd:54 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20d:9dff:fe96:dd54/64 scope link
valid_lft forever preferred_lft forever
8: br0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
link/ether 00:0d:9d:96:dd:54 brd ff:ff:ff:ff:ff:ff
inet 212.54.16.183/20 brd 212.54.31.255 scope global br0
inet6 fe80::20d:9dff:fe96:dd54/64 scope link
valid_lft forever preferred_lft forever
1: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,10000> mtu 1500 qdisc noqueue
link/void
3: veth101.0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
link/ether 00:0d:9d:96:dd:54 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20d:9dff:fe96:dd54/64 scope link
valid_lft forever preferred_lft forever
same problem still.
|
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
