Linux version 2.6.18-53.1.6.el5PAE (
mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed Jan 23 12:01:41 EST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000094800 (usable)
BIOS-e820: 0000000000094800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfef0000 (usable)
BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
3712MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f3900
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
NX (Execute Disable) protection: active
On node 0 totalpages: 1179648
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 950272 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: Unable to locate RSDP
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 15:3 APIC version 17
Processor #1 15:3 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000)
Detected 2411.114 MHz processor.
Built 1 zonelists. Total pages: 1179648
Kernel command line: ro root=LABEL=/
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0740000 soft=c0720000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4147924k/4718592k available (2077k kernel code, 44136k reserved, 860k data, 220k init, 3275712k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4823.65 BogoMIPS (lpj=2411828)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: AMD Dual Core AMD Opteron(tm) Processor 180 stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0741000 soft=c0721000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4821.53 BogoMIPS (lpj=2410768)
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Dual Core AMD Opteron(tm) Processor 180 stepping 02
Total of 2 processors activated (9645.19 BogoMIPS).
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
checking TSC synchronization across 2 CPUs:
CPU#0 had -134 usecs TSC skew, fixed it up.
CPU#1 had 134 usecs TSC skew, fixed it up.
Brought up 2 CPUs
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
migration_cost=296
checking if image is initramfs... it is
Freeing initrd memory: 2367k freed
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread F7D96AA0 could not acquire Mutex [2] [20060707]
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread F7D96AA0 could not acquire Mutex [2] [20060707]
PCI: PCI BIOS revision 3.00 entry at 0xfa7c0, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:09.0
PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 9
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 5
PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 11
PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 9
PCI->APIC IRQ transform: 0000:01:05.0[A] -> IRQ 5
PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 5
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI: Bridge: 0000:00:09.0
IO window: a000-afff
MEM window: fc000000-fdffffff
PREFETCH window: fea00000-feafffff
PCI: Bridge: 0000:00:0b.0
IO window: 9000-9fff
MEM window: fe900000-fe9fffff
PREFETCH window: fe800000-fe8fffff
PCI: Bridge: 0000:00:0c.0
IO window: 8000-8fff
MEM window: fe700000-fe7fffff
PREFETCH window: fe600000-fe6fffff
PCI: Bridge: 0000:00:0d.0
IO window: 7000-7fff
MEM window: fe500000-fe5fffff
PREFETCH window: fe400000-fe4fffff
PCI: Bridge: 0000:00:0e.0
IO window: 6000-6fff
MEM window: fe300000-fe3fffff
PREFETCH window: fe200000-fe2fffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1201253994.961:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 8D5042C035362BC
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 180 processors (2 cpu cores) (version 2.10.00)
powernow-k8: MP systems not supported by PSB BIOS structure
powernow-k8: MP systems not supported by PSB BIOS structure
Using IPI No-Shortcut mode
Freeing unused kernel memory: 220k freed
Write protecting the kernel read-only data: 387k
Time: pit clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 5, io mem 0xfebff000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 10, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
sata_nv 0000:00:07.0: version 3.4
sata_nv 0000:00:07.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:07.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xf8812480 ctl 0xf88124a0 bmdma 0x0001d400 irq 11
ata2: SATA max UDMA/133 cmd 0xf8812580 ctl 0xf88125a0 bmdma 0x0001d408 irq 11
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: ST3500630NS, 3.AEG, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
Vendor: ATA Model: ST3500630NS Rev: 3.AE
Type: Direct-Access ANSI SCSI revision: 05
ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sda: p3 exceeds device capacity
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: ST3500630NS Rev: 3.AE
Type: Direct-Access ANSI SCSI revision: 05
ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: unknown partition table
sd 1:0:0:0: Attached scsi disk sdb
sata_nv 0000:00:08.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xf8824480 ctl 0xf88244a0 bmdma 0x0001c000 irq 10
ata4: SATA max UDMA/133 cmd 0xf8824580 ctl 0xf88245a0 bmdma 0x0001c008 irq 10
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised:
dm-devel@redhat.com
attempt to access beyond end of device
sda: rw=0, want=1953535994, limit=976773168
Buffer I/O error on device sda3, logical block 237022992
attempt to access beyond end of device
sda: rw=0, want=1953535994, limit=976773168
Buffer I/O error on device sda3, logical block 237022992
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1201254003.012:2): selinux=0 auid=4294967295
EDAC MC: Ver: 2.0.1 Jan 23 2008
input: PC Speaker as /class/input/input2
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
tg3.c:v3.80-rh (August 2, 2007)
PCI: Setting latency timer of device 0000:04:00.0 to 64
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:e0:81:71:d4:c9
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
attempt to access beyond end of device
sda: rw=0, want=1953535994, limit=976773168
Buffer I/O error on device sda3, logical block 237022992
attempt to access beyond end of device
sda: rw=0, want=1953535994, limit=976773168
Buffer I/O error on device sda3, logical block 237022992
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
Buffer I/O error on device sda3, logical block 237023009
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
Buffer I/O error on device sda3, logical block 237023009
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
Buffer I/O error on device sda3, logical block 237023009
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
Buffer I/O error on device sda3, logical block 237023009
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
Buffer I/O error on device sda3, logical block 237023009
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
Buffer I/O error on device sda3, logical block 237023009
attempt to access beyond end of device
sda: rw=0, want=1953536074, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536122, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
eth1: forcedeth.c: subsystem: 010f1:2865 bound to 0000:00:0a.0
floppy0: no floppy controllers found
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
lp0: console ready
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 8193140k swap on /dev/mapper/nvidia_cgaaefaep2. Priority:-1 extents:1 across:8193140k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack: Unknown parameter `ip_conntrack_enable_ve0'
xt_state: Unknown symbol need_conntrack
xt_state: Unknown symbol ip_conntrack_untracked
ADDRCONF(NETDEV_UP): eth0: link is not ready
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
attempt to access beyond end of device
sda: rw=0, want=1953535994, limit=976773168
printk: 4 messages suppressed.
Buffer I/O error on device sda3, logical block 237022992
attempt to access beyond end of device
sda: rw=0, want=1953535994, limit=976773168
Buffer I/O error on device sda3, logical block 237022992
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
Buffer I/O error on device sda3, logical block 237023009
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
Buffer I/O error on device sda3, logical block 237023009
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536074, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536122, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
attempt to access beyond end of device
sda: rw=0, want=1953536130, limit=976773168
eth1: no IPv6 routers present
OpenVZ Forum
Members
Search
Help
Register
Login
Home
