Home » Mailing lists » Users » Question on openvz install on ubuntu
Question on openvz install on ubuntu [message #24813] |
Tue, 11 December 2007 01:59 ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Amba Giri
Messages: 8 Registered: December 2007
|
Junior Member |
|
|
Hi
I am following the instructions on Openvz website for installing openvz on
ubuntu 7.10 which is a Debian based system.
However, at the 'aptitude install ' step I get the error msg '
ovzkernel-2.6.9 not found'.
Any help is appreciated
Thanks
Amba
Add to your "/etc/apt/sources.list"
deb http://debian.systs.org/debian sarge openvz
and get the new package lists
# apt-get update
[edit<http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit§ion=3>
] precompiled kernel images at debian.systs.org (dso)
The kernel-images on debian.systs.org (dso) use the same kernel-config taken
from OpenVZ. (most kernel-modules are built-in!)
If there is more than one CPU available (or a CPU with hyperthreading), use
the kernel-smp deb. If there is more than 4 Gb of RAM available, use the
kernel-enterprise deb. Otherwise, use the plain kernel deb (kernel).
*Kernel flavors list* Kernel type Description Hardware Use case -
uniprocessor
up to 4GB of RAM -smp symmetric multiprocessor up to 4 GB of RAM 10-20 VPSs
-entnosplit SMP + PAE support up to 64 GB of RAM 10-30 VPSs -enterprise SMP
+ PAE support + 4/4GB split up to 64 GB of RAM >20-30 VPSs
kernel-image: i368 and amd64
ovzkernel-2.6.9
ovzkernel-2.6.9-smp
kernel-image: i386 only:
ovzkernel-2.6.9-enterprise
ovzkernel-2.6.9-entnosplit
OpenVZ tool(s) for i386 and amd64
vzctl
vzquota
vzprocps
vzdump
template(s) for i368 and amd64 : Debian 3.1 Minimal
vzctl-ostmpl-debian
[edit<http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit§ion=4>
] installing the kernel-images, toolset and debian-os-template
Example: install the stable OpenVZ kernel, tools and Debian OS Template
# aptitude install ovzkernel-2.6.9 vzctl vzquota vzdump vzctl-ostmpl-debian
|
|
|
|
Re: Question on openvz install on ubuntu [message #24874 is a reply to message #24813] |
Tue, 11 December 2007 16:43 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
|
I guess that Ubuntu 7.10 corresponds to Debian Etch, so you are using
the wrong part of the instruction.
You should look at
http://wiki.openvz.org/Installation_on_Debian#precompiled_kernel_images_at_debian.systs.org
And yes, the page is organized badly, I would suggest moving "building
your own kernel in a debian way" to a separate article, and maybe even
provide separate articles for Sarge and Etch. Can somebody work on it?
Amba Giri wrote:
> Hi
>
> I am following the instructions on Openvz website for installing
> openvz on ubuntu 7.10 which is a Debian based system.
> However, at the 'aptitude install ' step I get the error msg
> 'ovzkernel-2.6.9 not found'.
>
> Any help is appreciated
> Thanks
> Amba
>
>
> Add to your "/etc/apt/sources.list"
>
> deb http://debian.systs.org/debian sarge openvz
>
>
> and get the new package lists
>
> # apt-get update
>
>
>
> [edit
> <http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit§ion=3>]
> precompiled kernel images at debian.systs.org
> <http://debian.systs.org> (dso)
>
> The kernel-images on debian.systs.org <http://debian.systs.org> (dso)
> use the same kernel-config taken from OpenVZ. (most kernel-modules are
> built-in!)
>
> If there is more than one CPU available (or a CPU with
> hyperthreading), use the kernel-smp deb. If there is more than 4 Gb of
> RAM available, use the kernel-enterprise deb. Otherwise, use the plain
> kernel deb (kernel).
>
>
> *Kernel flavors list*
> Kernel type Description Hardware Use case
> - uniprocessor up to 4GB of RAM
> -smp symmetric multiprocessor up to 4 GB of RAM 10-20 VPSs
> -entnosplit SMP + PAE support up to 64 GB of RAM 10-30 VPSs
> -enterprise SMP + PAE support + 4/4GB split up to 64 GB of RAM
> >20-30 VPSs
>
> kernel-image: i368 and amd64
>
> ovzkernel-2.6.9
> ovzkernel-2.6.9-smp
>
>
> kernel-image: i386 only:
>
> ovzkernel-2.6.9-enterprise
> ovzkernel-2.6.9-entnosplit
>
>
> OpenVZ tool(s) for i386 and amd64
>
> vzctl
> vzquota
> vzprocps
> vzdump
>
>
> template(s) for i368 and amd64 : Debian 3.1 Minimal
>
> vzctl-ostmpl-debian
>
>
>
> [edit
> <http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit§ion=4>]
> installing the kernel-images, toolset and debian-os-template
>
> Example: install the stable OpenVZ kernel, tools and Debian OS Template
>
> # aptitude install ovzkernel-2.6.9 vzctl vzquota vzdump vzctl-ostmpl-debian
>
>
>
>
> ------------------------------------------------------------------------
>
|
|
|
|
Re: Question on openvz install on ubuntu [message #24901 is a reply to message #24874] |
Tue, 11 December 2007 20:39 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Amba Giri
Messages: 8 Registered: December 2007
|
Junior Member |
|
|
Kir
Thanks for your answer. I am now running into the following problem:
At the step:
#sudo wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - |
apt-key add -
gpg: no writable keyring found: eof
gpg: error reading '-': general error
gpg: import from '-' failed: general error
Amba
On 12/11/07, Kir Kolyshkin <kir@openvz.org> wrote:
>
> I guess that Ubuntu 7.10 corresponds to Debian Etch, so you are using
> the wrong part of the instruction.
>
> You should look at
>
> http://wiki.openvz.org/Installation_on_Debian#precompiled_kernel_images_at_debian.systs.org
>
> And yes, the page is organized badly, I would suggest moving "building
> your own kernel in a debian way" to a separate article, and maybe even
> provide separate articles for Sarge and Etch. Can somebody work on it?
>
> Amba Giri wrote:
> > Hi
> >
> > I am following the instructions on Openvz website for installing
> > openvz on ubuntu 7.10 which is a Debian based system.
> > However, at the 'aptitude install ' step I get the error msg
> > 'ovzkernel-2.6.9 not found'.
> >
> > Any help is appreciated
> > Thanks
> > Amba
> >
> >
> > Add to your "/etc/apt/sources.list"
> >
> > deb http://debian.systs.org/debian sarge openvz
> >
> >
> > and get the new package lists
> >
> > # apt-get update
> >
> >
> >
> > [edit
> > <
> http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit§ion=3
> >]
> > precompiled kernel images at debian.systs.org
> > <http://debian.systs.org> (dso)
> >
> > The kernel-images on debian.systs.org <http://debian.systs.org> (dso)
> > use the same kernel-config taken from OpenVZ. (most kernel-modules are
> > built-in!)
> >
> > If there is more than one CPU available (or a CPU with
> > hyperthreading), use the kernel-smp deb. If there is more than 4 Gb of
> > RAM available, use the kernel-enterprise deb. Otherwise, use the plain
> > kernel deb (kernel).
> >
> >
> > *Kernel flavors list*
> > Kernel type Description Hardware Use case
> > - uniprocessor up to 4GB of RAM
> > -smp symmetric multiprocessor up to 4 GB of RAM 10-20 VPSs
> > -entnosplit SMP + PAE support up to 64 GB of RAM 10-30 VPSs
> > -enterprise SMP + PAE support + 4/4GB split up to 64 GB of RAM
> > >20-30 VPSs
> >
> > kernel-image: i368 and amd64
> >
> > ovzkernel-2.6.9
> > ovzkernel-2.6.9-smp
> >
> >
> > kernel-image: i386 only:
> >
> > ovzkernel-2.6.9-enterprise
> > ovzkernel-2.6.9-entnosplit
> >
> >
> > OpenVZ tool(s) for i386 and amd64
> >
> > vzctl
> > vzquota
> > vzprocps
> > vzdump
> >
> >
> > template(s) for i368 and amd64 : Debian 3.1 Minimal
> >
> > vzctl-ostmpl-debian
> >
> >
> >
> > [edit
> > <
> http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit§ion=4
> >]
> > installing the kernel-images, toolset and debian-os-template
> >
> > Example: install the stable OpenVZ kernel, tools and Debian OS Template
> >
> > # aptitude install ovzkernel-2.6.9 vzctl vzquota vzdump
> vzctl-ostmpl-debian
> >
> >
> >
> >
> > ------------------------------------------------------------------------
> >
|
|
|
Re: Question on openvz install on ubuntu [message #24903 is a reply to message #24901] |
Tue, 11 December 2007 20:47 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Amba Giri
Messages: 8 Registered: December 2007
|
Junior Member |
|
|
On 12/11/07, Amba Giri <giri.amba@gmail.com> wrote:
>
> Kir
>
> Thanks for your answer. I am now running into the following problem:
>
> At the step:
> #sudo wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - |
> apt-key add -
>
> gpg: no writable keyring found: eof
> gpg: error reading '-': general error
> gpg: import from '-' failed: general error
>
> Amba
>
>
>
> On 12/11/07, Kir Kolyshkin <kir@openvz.org> wrote:
> >
> > I guess that Ubuntu 7.10 corresponds to Debian Etch, so you are using
> > the wrong part of the instruction.
> >
> > You should look at
> > http://wiki.openvz.org/Installation_on_Debian#precompiled_kernel_images_at_debian.systs.org
> >
> >
> > And yes, the page is organized badly, I would suggest moving "building
> > your own kernel in a debian way" to a separate article, and maybe even
> > provide separate articles for Sarge and Etch. Can somebody work on it?
> >
> > Amba Giri wrote:
> > > Hi
> > >
> > > I am following the instructions on Openvz website for installing
> > > openvz on ubuntu 7.10 which is a Debian based system.
> > > However, at the 'aptitude install ' step I get the error msg
> > > 'ovzkernel-2.6.9 not found'.
> > >
> > > Any help is appreciated
> > > Thanks
> > > Amba
> > >
> > >
> > > Add to your "/etc/apt/sources.list"
> > >
> > > deb http://debian.systs.org/debian sarge openvz
> > >
> > >
> > > and get the new package lists
> > >
> > > # apt-get update
> > >
> > >
> > >
> > > [edit
> > > <http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit§ion=3
> > >]
> > > precompiled kernel images at debian.systs.org
> > > < http://debian.systs.org> (dso)
> > >
> > > The kernel-images on debian.systs.org <http://debian.systs.org> (dso)
> > > use the same kernel-config taken from OpenVZ. (most kernel-modules are
> >
> > > built-in!)
> > >
> > > If there is more than one CPU available (or a CPU with
> > > hyperthreading), use the kernel-smp deb. If there is more than 4 Gb of
> > > RAM available, use the kernel-enterprise deb. Otherwise, use the plain
> >
> > > kernel deb (kernel).
> > >
> > >
> > > *Kernel flavors list*
> > > Kernel type Description Hardware Use case
> > > - uniprocessor up to 4GB of RAM
> > > -smp symmetric multiprocessor up to 4 GB of RAM 10-20
> > VPSs
> > > -entnosplit SMP + PAE support up to 64 GB of RAM 10-30
> > VPSs
> > > -enterprise SMP + PAE support + 4/4GB split up to 64 GB of
> > RAM
> > > >20-30 VPSs
> > >
> > > kernel-image: i368 and amd64
> > >
> > > ovzkernel-2.6.9
> > > ovzkernel-2.6.9-smp
> > >
> > >
> > > kernel-image: i386 only:
> > >
> > > ovzkernel-2.6.9-enterprise
> > > ovzkernel-2.6.9-entnosplit
> > >
> > >
> > > OpenVZ tool(s) for i386 and amd64
> > >
> > > vzctl
> > > vzquota
> > > vzprocps
> > > vzdump
> > >
> > >
> > > template(s) for i368 and amd64 : Debian 3.1 Minimal
> > >
> > > vzctl-ostmpl-debian
> > >
> > >
> > >
> > > [edit
> > > <
> > http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit§ion=4>]
> >
> > > installing the kernel-images, toolset and debian-os-template
> > >
> > > Example: install the stable OpenVZ kernel, tools and Debian OS
> > Template
> > >
> > > # aptitude install ovzkernel-2.6.9 vzctl vzquota vzdump
> > vzctl-ostmpl-debian
> > >
> > >
> > >
> > >
> > >
> > ------------------------------------------------------------------------
> > >
|
|
|
|
|
|
Re: Question on openvz install on ubuntu [message #24990 is a reply to message #24920] |
Wed, 12 December 2007 19:05 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Amba Giri
Messages: 8 Registered: December 2007
|
Junior Member |
|
|
Thorsten,
The Ubuntu version is 7.10 and the booted linux kernel is 2.6.22-14-server.
Thanks
Amba
On Dec 11, 2007 11:18 PM, Thorsten Schifferdecker <tsd@debian.systs.org>
wrote:
> Can you please post the ubunutu version is used and what linux kernels
> is booted.
>
> Amba Giri wrote:
> > Thanks Thorsten. Unfortuntely, I am still running into the following
> problem
> >
> > On reboot, iget the error msg 'Statrting OpenVZ: failed to load module
> > vzmon..failed'
> >
> > I also did a 'sudo apt-get install vzctl vzquota vzdump
> > vzctl-ostmpl-debian' but that did not fix above problem. Also,
> > vzctl-ostmpl-debian could not be found.
> >
> > Thanks again for your assistance
> > Amba
> >
> >
> >
> > On 12/11/07, *Thorsten Schifferdecker* <tsd@debian.systs.org
> > <mailto:tsd@debian.systs.org>> wrote:
> >
> > Hi Amba,
> >
> > for ubunutu, you should use:
> >
> > # wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - |
> > sudo apt-key add -
> >
> > Bye,
> > Thorsten
> > _______________________________________________
> > Users mailing list
> > Users@openvz.org <mailto:Users@openvz.org>
> > https://openvz.org/mailman/listinfo/users
> >
> >
> >
> > ------------------------------------------------------------------------
> >
|
|
|
Re: Question on openvz install on ubuntu 7.10 [message #25008 is a reply to message #24990] |
Wed, 12 December 2007 22:06 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Thorsten Schifferdeck
Messages: 38 Registered: February 2006
|
Member |
|
|
Hi Amba,
ok, i've supposed that, the error occured while a non-OpenVZ kernel is
booted:
ubunutu shipped a kernel version 2.6.22-... and the (stable) OpenVZ
Kernel at debian.systs.org is a 2.6.18, so the first kernel to boot is
the 2.6.22 and than the "older" 2.6.18 OpenVZ kernel.
So please inspect your boot loader config, eg. grub (-> edit
/boot/grub/menu.list ) and place the openvz kernel on first boot order
and reboot the machine.
and voila another OpenVZ node is on the way :-)
Bye,
Thorsten
Amba Giri wrote:
> Thorsten,
>
> The Ubuntu version is 7.10 and the booted linux kernel is
> 2.6.22-14-server.
>
> Thanks
> Amba
>
> On Dec 11, 2007 11:18 PM, Thorsten Schifferdecker <tsd@debian.systs.org
> <mailto:tsd@debian.systs.org>> wrote:
>
> Can you please post the ubunutu version is used and what linux kernels
> is booted.
>
> Amba Giri wrote:
> > Thanks Thorsten. Unfortuntely, I am still running into the
> following problem
> >
> > On reboot, iget the error msg 'Statrting OpenVZ: failed to load
> module
> > vzmon..failed'
> >
|
|
|
Re: Question on openvz install on ubuntu 7.10 [message #25015 is a reply to message #25008] |
Wed, 12 December 2007 23:21 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) |
Amba Giri
Messages: 8 Registered: December 2007
|
Junior Member |
|
|
Thanks Thorsten - that did fix the problem. :)
Thanks a lot!
Amba
On Dec 12, 2007 2:06 PM, Thorsten Schifferdecker <tsd@debian.systs.org>
wrote:
> Hi Amba,
>
> ok, i've supposed that, the error occured while a non-OpenVZ kernel is
> booted:
>
> ubunutu shipped a kernel version 2.6.22-... and the (stable) OpenVZ
> Kernel at debian.systs.org is a 2.6.18, so the first kernel to boot is
> the 2.6.22 and than the "older" 2.6.18 OpenVZ kernel.
>
> So please inspect your boot loader config, eg. grub (-> edit
> /boot/grub/menu.list ) and place the openvz kernel on first boot order
> and reboot the machine.
>
> and voila another OpenVZ node is on the way :-)
>
> Bye,
> Thorsten
>
> Amba Giri wrote:
> > Thorsten,
> >
> > The Ubuntu version is 7.10 and the booted linux kernel is
> > 2.6.22-14-server.
> >
> > Thanks
> > Amba
> >
> > On Dec 11, 2007 11:18 PM, Thorsten Schifferdecker <tsd@debian.systs.org
> > <mailto:tsd@debian.systs.org>> wrote:
> >
> > Can you please post the ubunutu version is used and what linux
> kernels
> > is booted.
> >
> > Amba Giri wrote:
> > > Thanks Thorsten. Unfortuntely, I am still running into the
> > following problem
> > >
> > > On reboot, iget the error msg 'Statrting OpenVZ: failed to load
> > module
> > > vzmon..failed'
> > >
|
|
|
Goto Forum:
Current Time: Sun Aug 18 13:01:09 GMT 2024
Total time taken to generate the page: 0.02998 seconds
|