OpenVZ Forum: Support » bugreport filed: USB device in VE / All-in-one printer-scanner

Home » General » Support » bugreport filed: USB device in VE / All-in-one printer-scanner

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

bugreport filed: USB device in VE / All-in-one printer-scanner [message #24716]

Sat, 08 December 2007 07:42

hoppaz
Messages: 11
Registered: December 2007
Location: Pulheim - Germany

Junior Member

Hi,

I searched around and found no solution for my question:

I've got an HP-scanner which can be accessed via hplip.
Currently it will be shown in HE as
~# lsusb
Bus 006 Device 006: ID 03f0:4f11 Hewlett-Packard

How to make it accessible within the VE? (Yes I've read the http://wiki.openvz.org/Printing_in_VE_with_Debian_stable Wink

Lars

[Updated on: Wed, 12 December 2007 11:12]

Report message to a moderator

Re: USB device in VE / All-in-one printer-scanner [message #24809 is a reply to message #24716]

Mon, 10 December 2007 21:24

hoppaz
Messages: 11
Registered: December 2007
Location: Pulheim - Germany

Junior Member

OK... moving little steps further...

The usb-Device is connected to /dev/bus/usb/006/006
ls -al /dev/bus/usb/006/006
crw-rw-r-- 1 root root 189, 645 2007-12-10 21:19 /dev/bus/usb/006/006

So I created such device using mknod within VE.
Added DEVICES="c:189:645:rw " to the config.

I get no access to the device:
cat /dev/bus/usb/006/006
cat: /dev/bus/usb/006/006: Permission denied

Report message to a moderator

Previous Topic:	process of another ve?
Next Topic:	(SOLVED) sysctl -p issue

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Sep 16 06:19:31 GMT 2024

Total time taken to generate the page: 0.04093 seconds