OpenVZ Forum: Support » need 2.6.19+ kernel in debian

Home » General » Support » need 2.6.19+ kernel in debian

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

need 2.6.19+ kernel in debian [message #22771]

Sat, 03 November 2007 13:00

happyfunball
Messages: 18
Registered: November 2007
Location: Toronto

Junior Member

My new server uses a 3ware 9650 controller which is supported natively in 2.6.19+ kernels, but Etch only shows me the 2.18openvz kernels.

When I install the openvz-enterprise kernel from apt, the disk array is no longer recognized (and the machine can't boot).

How can I get a newer openvz kernel working in debian? Am I stuck with Fedora?

Report message to a moderator

Re: need 2.6.19+ kernel in debian [message #22796 is a reply to message #22771]

Sat, 03 November 2007 17:39

vkhutornoy
Messages: 2
Registered: November 2007

Junior Member

If you feel comfortable running on the test branch of the openvz patches, you may try this:
http://wiki.openvz.org/Download_kernel_2.6.22/Archives/ovz00 3.2

there is a patch for 2.6.22 vanilla kernel available - you may download it and build your custom kernel with help of this article:
http://wiki.openvz.org/Kernel_build

I am running on 2.6.22 with this patch and it looks stable for me.

[Updated on: Sat, 03 November 2007 17:40]

Report message to a moderator

Re: need 2.6.19+ kernel in debian [message #22800 is a reply to message #22796]

Sat, 03 November 2007 22:35

happyfunball
Messages: 18
Registered: November 2007
Location: Toronto

Junior Member

This worked beautifully, thank you!

Report message to a moderator

Re: need 2.6.19+ kernel in debian [message #23041 is a reply to message #22796]

Sun, 11 November 2007 00:56

happyfunball
Messages: 18
Registered: November 2007
Location: Toronto

Junior Member

I spoke too soon. The kernel compiles and vzctl works, but none of my VE's can see the outside world. Packets are not being forwarded.

After checking on the HW node, it turns out that IPTables is not installed in the kernel. Looks like that openvz config file for 2.6.22 is wrong.

How can I get my VE's to see the outside world?

Report message to a moderator

Re: need 2.6.19+ kernel in debian [message #23060 is a reply to message #23041]

Sun, 11 November 2007 11:41

vkhutornoy
Messages: 2
Registered: November 2007

Junior Member

Well, basically, you do not need iptables to get packets forwarded. Have you checked if ip_forward is enabled?
As for the iptables issue - you probably need just to recompile your kernel with firewall enabled.

Report message to a moderator

Re: need 2.6.19+ kernel in debian, 3ware Kernel Module 3x-9xxxx [message #23063 is a reply to message #22771]

Sun, 11 November 2007 14:55

curx
Messages: 739
Registered: February 2006
Location: Nürnberg, Germany

Senior Member

Hi,

it's easy the build the 3ware-9xxx driver for Debian on 2.6.18 :

1) go to 3ware website (-> http://www.3ware.com/support/download.asp )
Select:

-> 3ware card 9560 SE
-> 3ware 9560 SE 2LP ...
-> Driver
-> Linux 2.6. source
-> next
-> 3w-9xxx-2.6.18kernel-9.4.2.tgz, fetch it and unpack it and change dir to drivers of 3ware tar-gz

2) Download the linux-headers for your kernel
# aptitude install <linux-header_for_your_running_kernel>

3) build module
# ln -s /usr/src/linux-headers-<downloaded_kernel-headers> /usr/src/linux

# make

You will find your module "3w-9xxx.ko" in the directory.

Report message to a moderator

Re: need 2.6.19+ kernel in debian, 3ware Kernel Module 3x-9xxxx [message #23065 is a reply to message #23063]

Sun, 11 November 2007 16:39

happyfunball
Messages: 18
Registered: November 2007
Location: Toronto

Junior Member

What do I do after I have the .ko driver file? How do I add that to a kernel?

Report message to a moderator

Re: need 2.6.19+ kernel in debian [message #23074 is a reply to message #23060]

Mon, 12 November 2007 05:42

happyfunball
Messages: 18
Registered: November 2007
Location: Toronto

Junior Member

ip_forward was enabled but it still didn't work. Enabling firewall in the conf didn't help either. I need iptables to monitor bandwidth so its important.

I dropped down to a 2.6.20 kernel, applied patches and config and compiled/installed. Everything now works ok.

What is wrong with this kernel (2.6.20 ?). Anything I should watch out for? I see that development on it has been stopped and only 2.6.22 is being worked on.

Report message to a moderator

Previous Topic:	DL380 G2 - CCISS
Next Topic:	Ok, I got it up what now?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Aug 01 14:24:00 GMT 2025

Total time taken to generate the page: 0.59800 seconds