OpenVZ Forum: Support » Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3

Home » General » Support » Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 [message #1875 is a reply to message #1874]

Thu, 02 March 2006 16:08

steffen.zieger
Messages: 43
Registered: February 2006
Location: Germany, Stuttgart

Member

Hello,

because if there is /24, the gentoo-vserver-init-script (to be correct: route is complaining) is complaining about an unknown device or something like that.

man route:

route add -net 192.56.76.0 netmask 255.255.255.0 dev eth0
              adds a route to the network 192.56.76.x via "eth0". The Class C netmask  modi-
              fier  is  not really necessary here because 192.* is a Class C IP address. The
              word "dev" can be omitted here.

Don't know for sure, if it is really needed, but if it's missing, it's not working Smile

HTH,
Steffen

Report message to a moderator

[Message index]

		Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Wed, 01 March 2006 09:13
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: disaster on Wed, 01 March 2006 16:02
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Wed, 01 March 2006 22:03
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: disaster on Thu, 02 March 2006 08:11
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Thu, 02 March 2006 08:16
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: disaster on Thu, 02 March 2006 08:27
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Thu, 02 March 2006 08:31
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: kir on Thu, 02 March 2006 15:16
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Thu, 02 March 2006 16:08
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Thu, 02 March 2006 16:30
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Thu, 09 March 2006 16:00
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Thu, 09 March 2006 16:25
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: kir on Thu, 09 March 2006 16:34
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: Jason Stubbs on Fri, 10 March 2006 16:13
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: kir on Fri, 10 March 2006 16:20
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: Jason Stubbs on Sat, 11 March 2006 03:38
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: kir on Sat, 11 March 2006 09:53
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: Jason Stubbs on Sat, 11 March 2006 10:27
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Sat, 11 March 2006 14:33
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: Jason Stubbs on Sat, 11 March 2006 15:03
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Sat, 11 March 2006 15:09
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: Jason Stubbs on Sat, 11 March 2006 16:02
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Sat, 11 March 2006 17:52
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: Jason Stubbs on Sun, 12 March 2006 02:02
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: steffen.zieger on Sun, 12 March 2006 13:50
		Re: Changed gentoo-add_ip.sh to work with baselayout-vserver-1.11.14-r3 By: Jason Stubbs on Mon, 13 March 2006 04:24

Previous Topic:	Multicast support
Next Topic:	64Bit CPU Required for high RAM OpenVZ Servers?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 13 06:23:13 GMT 2024

Total time taken to generate the page: 0.02283 seconds