Home » Mailing lists » Devel » semantics for namespace naming
semantics for namespace naming [message #17016] |
Wed, 13 December 2006 14:35 ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
serue
Messages: 750 Registered: February 2006
|
Senior Member |
|
|
Let's say we have a vserver, from which we start some jobs
which we want to checkpoint/restart/migrate. These are two
of the usages we currently foresee for the namespaces, though
I'd say it's safe to assume there will be more.
I'll want to be able to address the c/r jobs by some ID in
order to checkpoint and kill them. I'll also want to be
able to address the entire vserver by some ID, in order to
kill it. In that case the c/r jobs should also be killed.
So those jobs are known by at least two id's. Furthermore, I
may want two vservers on the same machine, both running a c/r
job called 'calculate_pi'.
So we can look at this as a filesystem. In the above scenario,
we've got /sergesvserver, /sergesvserver/calculate_pi,
/randomvserver, and /randomvserver/calculate_pi. And, if
user hallyn logs into /sergesvserver using pam_namespace.so,
unsharing his mounts namespace to get a private /tmp and /home,
then he ends up in /sergesvserver/unnamed1. So each nsproxy
has a node in the namespace id filesystem, with random names
unless/until it is renamed to a more meaningful name. This
allows us to switch to a vserver by specifying the vserver's
name (ln /sys/namespaces/vserver1 /proc/nsproxy or whatever
semantics we end up using), kill an entire vserver recursively
(rm -rf /sys/namespaces/vserver1), perhaps even checkpoint
(tar jcf /tarballs/vserver1 /sys/namespaces/vserver1) and
certainly rename (mv /sys/namespaces/unnamed1 /sys/namespaces/sergeprivhome).
One key observeration which I haven't made explicit is that you
never actually leave a nsid ("container"). If you start under
/vserver1, you will always be under /vserver1. I don't know of
any reason that would not be appropriate. If I start a nested
vserver from there, then to me it may be known as
'vserver_testme', while to the admin of the machine, it would be
known as /vserver1/vserver_testme.
This makes one possible implementation of the container struct:
struct container {
struct container *parent;
char *name;
struct nsproxy *nsproxy;
struct list_head children;
};
struct nsproxy {
...
struct container *container;
};
Plus of course relevant sysfs stuff.
-serge
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
|
|
Re: semantics for namespace naming [message #17034 is a reply to message #17016] |
Thu, 14 December 2006 02:16 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Sukadev Bhattiprolu
Messages: 413 Registered: August 2006
|
Senior Member |
|
|
Serge E. Hallyn [serue@us.ibm.com] wrote:
| Let's say we have a vserver, from which we start some jobs
| which we want to checkpoint/restart/migrate. These are two
| of the usages we currently foresee for the namespaces, though
| I'd say it's safe to assume there will be more.
|
| I'll want to be able to address the c/r jobs by some ID in
| order to checkpoint and kill them. I'll also want to be
| able to address the entire vserver by some ID, in order to
| kill it. In that case the c/r jobs should also be killed.
| So those jobs are known by at least two id's.
For your calculate_pi example below, are the two ids "calculate_pi"
and "/sergevserver/calculate_pi" (ie. are the two plus ids basically
like relative and absolute pathnames or are they independent ?
And unrelated to the namespace naming - by "job" do you mean a single
process or can a job include multiple processes ? If it can include
multiple, can we checkpoint/restart/migrate just the job ? I am
thinking that we would need to migrate the entire vserver to
preserve process relationships - no ?
| Furthermore, I may want two vservers on the same machine, both
| running a c/r job called 'calculate_pi'.
|
| So we can look at this as a filesystem. In the above scenario,
| we've got /sergesvserver, /sergesvserver/calculate_pi,
| /randomvserver, and /randomvserver/calculate_pi. And, if
| user hallyn logs into /sergesvserver using pam_namespace.so,
| unsharing his mounts namespace to get a private /tmp and /home,
| then he ends up in /sergesvserver/unnamed1. So each nsproxy
| has a node in the namespace id filesystem, with random names
| unless/until it is renamed to a more meaningful name. This
| allows us to switch to a vserver by specifying the vserver's
| name (ln /sys/namespaces/vserver1 /proc/nsproxy or whatever
| semantics we end up using), kill an entire vserver recursively
| (rm -rf /sys/namespaces/vserver1), perhaps even checkpoint
| (tar jcf /tarballs/vserver1 /sys/namespaces/vserver1) and
| certainly rename (mv /sys/namespaces/unnamed1 /sys/namespaces/sergeprivhome).
|
| One key observeration which I haven't made explicit is that you
| never actually leave a nsid ("container"). If you start under
| /vserver1, you will always be under /vserver1. I don't know of
| any reason that would not be appropriate. If I start a nested
| vserver from there, then to me it may be known as
| 'vserver_testme', while to the admin of the machine, it would be
| known as /vserver1/vserver_testme.
|
| This makes one possible implementation of the container struct:
|
| struct container {
| struct container *parent;
| char *name;
| struct nsproxy *nsproxy;
| struct list_head children;
| };
| struct nsproxy {
| ...
| struct container *container;
| };
|
| Plus of course relevant sysfs stuff.
|
| -serge
| _______________________________________________
| Containers mailing list
| Containers@lists.osdl.org
| https://lists.osdl.org/mailman/listinfo/containers
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
Re: semantics for namespace naming [message #17039 is a reply to message #17016] |
Thu, 14 December 2006 05:41 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
ebiederm
Messages: 1354 Registered: February 2006
|
Senior Member |
|
|
Temporarily restricting myself to system containers because
they are well defined.
We have two things we need to name.
- Entire containers.
- Namespaces inside of a container.
So far Cedric's suggestion is a peculiar way of naming namespaces.
Which for the bind_ns is probably what we want, but it is not
what we want for container identification.
Entire container identification.
--------------------------------------------------------------------
All process in unix are organized into a process tree.
Every system container has a unique init process that always
exists for the life of the container.
In the process tree the descendants of that init process are
the process in the specified container.
So if we remember the init process to container mapping we
can find the containers of any process merely by following
the parent process (ppid) up the process tree.
Which leads to the strong suggestion that for application containers
we somehow maintain the cohesiveness of the process tree.
To be clear, the unit of checkpoint/restart/migration is the
container. So far only our definitions of system containers have
managed the state properly for checkpoint/restart but ideally
application containers should be designed so we can do that as
well.
The basic operations on a whole container are pretty much:
suspend/restart, checkpoint/restart/migration, kill, accounting
and user display.
Namespace identification.
---------------------------------------------------------------------
We also need a way to talk about individual namespaces.
We need this so we can clearly export to user space which process
share a namespace and which processes don't. Allowing us to talk
clearly about the group of process that share that namespace, as
well as give us the opportunity to debug reference counting problems.
For functionality like bind_ns per identifiers that clearly identify
a namespace are what we really want.
Debugging
---------------------------------------------------------------------
Capturing a checkpoint of a set of processes and debugging a set of
processes is a very similar operation. Entering a namespace and
debugging processes in a namespace is a very similar operation.
I can currently manipulate processes in namespace, and by
manipulating those processes create new processes in a namespace
with sys_ptrace, the standard debugging facility.
I have yet to look at the possibilities in great detail but it looks
to me that what we want for containers is an enhancement of our
debugging mechanisms. So we can do the inspection and manipulation
we find desirable.
The classic enter implementation seems weak and error prone
when compared to what the current sys_ptrace can do and what we would
like to do in terms of checkpoint restart.
--------------------------------------------------------------------
One of the issues is for good long term support is that we want
interfaces that are either absolutely trivial to implement or
interfaces that large numbers of people will use. The more people
using an interface the more free testers and fixers we get and
the higher the priority of keeping our code working.
"Serge E. Hallyn" <serue@us.ibm.com> writes:
> Let's say we have a vserver, from which we start some jobs
> which we want to checkpoint/restart/migrate. These are two
> of the usages we currently foresee for the namespaces, though
> I'd say it's safe to assume there will be more.
>
> I'll want to be able to address the c/r jobs by some ID in
> order to checkpoint and kill them. I'll also want to be
> able to address the entire vserver by some ID, in order to
> kill it. In that case the c/r jobs should also be killed.
> So those jobs are known by at least two id's. Furthermore, I
> may want two vservers on the same machine, both running a c/r
> job called 'calculate_pi'.
>
> So we can look at this as a filesystem. In the above scenario,
> we've got /sergesvserver, /sergesvserver/calculate_pi,
> /randomvserver, and /randomvserver/calculate_pi. And, if
> user hallyn logs into /sergesvserver using pam_namespace.so,
> unsharing his mounts namespace to get a private /tmp and /home,
> then he ends up in /sergesvserver/unnamed1. So each nsproxy
> has a node in the namespace id filesystem, with random names
> unless/until it is renamed to a more meaningful name. This
> allows us to switch to a vserver by specifying the vserver's
> name (ln /sys/namespaces/vserver1 /proc/nsproxy or whatever
> semantics we end up using), kill an entire vserver recursively
> (rm -rf /sys/namespaces/vserver1), perhaps even checkpoint
> (tar jcf /tarballs/vserver1 /sys/namespaces/vserver1) and
> certainly rename (mv /sys/namespaces/unnamed1
> /sys/namespaces/sergeprivhome).
I certainly see merit in using a file system interface for some
aspects of namespace manipulation. As much as possible we want
to keep to the old interfaces but that should not be a big deal.
> One key observeration which I haven't made explicit is that you
> never actually leave a nsid ("container"). If you start under
> /vserver1, you will always be under /vserver1. I don't know of
> any reason that would not be appropriate. If I start a nested
> vserver from there, then to me it may be known as
> 'vserver_testme', while to the admin of the machine, it would be
> known as /vserver1/vserver_testme.
Yes. Although on the crazy suggestion from I have heard
pivot_container suggested... Which may have some merit for the
software suspend story but otherwise doesn't seem useful...
> This makes one possible implementation of the container struct:
>
> struct container {
> struct container *parent;
> char *name;
> struct nsproxy *nsproxy;
> struct list_head children;
> };
> struct nsproxy {
> ...
> struct container *container;
> };
For your chosen struct container I guess if the hierarchy are
struct containers that will work. Going from your struct container
to anything interesting is currently a walk through the process list
which is painful. So I would suggest putting a pointer to the
init process of the container, that is probably better than the
nsproxy.
I'm not quite convinced we need the struct container. But I have
no fundamental objects to it either.
> Plus of course relevant sysfs stuff.
/proc is actually the appropriate filesystem for this sort of
information not sysfs. Handling the network information that
is in sysfs is going to be hard enough.
Eric
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
|
Re: semantics for namespace naming [message #17044 is a reply to message #17016] |
Thu, 14 December 2006 15:36 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
serue
Messages: 750 Registered: February 2006
|
Senior Member |
|
|
Quoting Cedric Le Goater (clg@fr.ibm.com):
> Serge E. Hallyn wrote:
> > Let's say we have a vserver, from which we start some jobs
> > which we want to checkpoint/restart/migrate. These are two
> > of the usages we currently foresee for the namespaces, though
> > I'd say it's safe to assume there will be more.
> >
> > I'll want to be able to address the c/r jobs by some ID in
> > order to checkpoint and kill them. I'll also want to be
> > able to address the entire vserver by some ID, in order to
> > kill it. In that case the c/r jobs should also be killed.
> > So those jobs are known by at least two id's. Furthermore, I
> > may want two vservers on the same machine, both running a c/r
> > job called 'calculate_pi'.
> >
> > So we can look at this as a filesystem. In the above scenario,
> > we've got /sergesvserver, /sergesvserver/calculate_pi,
> > /randomvserver, and /randomvserver/calculate_pi. And, if
> > user hallyn logs into /sergesvserver using pam_namespace.so,
> > unsharing his mounts namespace to get a private /tmp and /home,
> > then he ends up in /sergesvserver/unnamed1. So each nsproxy
> > has a node in the namespace id filesystem, with random names
> > unless/until it is renamed to a more meaningful name. This
> > allows us to switch to a vserver by specifying the vserver's
> > name (ln /sys/namespaces/vserver1 /proc/nsproxy or whatever
> > semantics we end up using), kill an entire vserver recursively
> > (rm -rf /sys/namespaces/vserver1), perhaps even checkpoint
> > (tar jcf /tarballs/vserver1 /sys/namespaces/vserver1) and
> > certainly rename (mv /sys/namespaces/unnamed1 /sys/namespaces/sergeprivhome).
> >
> > One key observeration which I haven't made explicit is that you
> > never actually leave a nsid ("container"). If you start under
> > /vserver1, you will always be under /vserver1. I don't know of
> > any reason that would not be appropriate. If I start a nested
> > vserver from there, then to me it may be known as
> > 'vserver_testme', while to the admin of the machine, it would be
> > known as /vserver1/vserver_testme.
> >
> > This makes one possible implementation of the container struct:
> >
> > struct container {
> > struct container *parent;
> > char *name;
> > struct nsproxy *nsproxy;
> > struct list_head children;
> > };
> > struct nsproxy {
> > ...
> > struct container *container;
> > };
> >
> > Plus of course relevant sysfs stuff.
>
> I like the naming model. a few questions :
>
> how do you enter only a subset of namespaces of a nsproxy/container
> and not all of it ?
one container corresponds to one nsproxy which is one set of namespaces.
Are you asking how you would only switch your pid namespace but keep
your network namespace as the original?
I'm not sure that's something we want/need to support. (Can you cite a
use case?) But since I haven't specified how to ask for the nsproxy
switch anyway, it's too early to ask how we add a flag to specify a
namespace subset :)
I'm calling it a filesystem because we all understand the naming
semantics then, but that doesn't mean there'll be an actual
filesystem. It may all be hidden behind syscalls, in which case
we could do bind_ns(container_id, flags), where flags specifies which
namespaces to switch over.
But boy, then we need a new nsproxy to refcount those namespaces :)
Yuck.
> what flexibility the struct container is giving us ? why not have
> container == nsproxy ?
One reason is: once a process is in a container c1, if it unshares
and enters c2, it is still in c1. So if it was the last process out
of c1 to unshare, we need c1 to stick around, but the nsproxy will
be deleted. We could change the nsproxy semantics to match these
container semantics, but that makes the nsproxy implementation more
"magical".
And, of course, it's still under debate whether we'll keep the nsproxy.
This container model doesn't depend on the nsproxy, it's just exploiting
it. It can also work if all the namespaces are in the task_struct
explicitly.
> the recursivity model looks like extra overhead. it could be flat.
Absolutely not - it allows us to know with basically no accounting
overhead which namespaces a process is a part of. It naturally fits
our needs here. A process which is a part of /vserver1/calculate_pi
is also a part of /vserver1, and so if we kill /vserver1, we should
kill /vserver1/calculate_pi as well. Not doing this simple hierarchical
model means we have to explicitly keep track of all the containers
which a process is a part of.
As I said, once a process is in a container, it never leaves that
container. It only enters additional ones. That model fits everyone's
needs, without needing some funky API. If you consider the kinds of
things users would need to specify otherwise - "Unshare, creating a new
container, but leaving me in the old container", "unshare, creating a
new container, and leaving the old container" (for which there is no
need), and "unshare, keeping me inthe old container", the almost
entirely implicit approach I just outlined is far far preferable IMO.
-serge
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
Re: semantics for namespace naming [message #17045 is a reply to message #17034] |
Thu, 14 December 2006 15:47 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
serue
Messages: 750 Registered: February 2006
|
Senior Member |
|
|
Quoting Sukadev Bhattiprolu (sukadev@us.ibm.com):
> Serge E. Hallyn [serue@us.ibm.com] wrote:
> | Let's say we have a vserver, from which we start some jobs
> | which we want to checkpoint/restart/migrate. These are two
> | of the usages we currently foresee for the namespaces, though
> | I'd say it's safe to assume there will be more.
> |
> | I'll want to be able to address the c/r jobs by some ID in
> | order to checkpoint and kill them. I'll also want to be
> | able to address the entire vserver by some ID, in order to
> | kill it. In that case the c/r jobs should also be killed.
> | So those jobs are known by at least two id's.
>
> For your calculate_pi example below, are the two ids "calculate_pi"
> and "/sergevserver/calculate_pi" (ie. are the two plus ids basically
> like relative and absolute pathnames or are they independent ?
Right, so if you're inside /servervserver, you will just know the
namespace as 'calculate_pi', but if you're in the initial namespace,
'/', then you know it as /servervserver/calculate_pi.
> And unrelated to the namespace naming - by "job" do you mean a single
> process or can a job include multiple processes ? If it can include
Multiple processes.
> multiple, can we checkpoint/restart/migrate just the job ? I am
> thinking that we would need to migrate the entire vserver to
> preserve process relationships - no ?
So presumably when you did your
/bin/checkpointable_exec -nsid calculate_pi /bin/calculate_pi
then /bin/checkpointable_exec would have unshared the pid namespace.
So /servervserver and /servervserver/calculate_pi would have
different pidspaces. If they don't, then presumably you knew what
you were doing.
Whether you do have to checkpoint/restart an entire pidspace I'm
not sure, though I guess it mainly depends on what the applications
do. So long as they only talk to each other, I don't see why
the restore couldn't just recognize that pid 245, which was the
one to start the job, but which itself is not in the container
and therefore not checkpointed. So it can tweak the children of
pid 245 so their ->parent pointers point to the container init task.
But maybe not. I haven't really thought through that all.
thanks,
-serge
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
Re: semantics for namespace naming [message #17047 is a reply to message #17039] |
Thu, 14 December 2006 16:28 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
serue
Messages: 750 Registered: February 2006
|
Senior Member |
|
|
Quoting Eric W. Biederman (ebiederm@xmission.com):
(still digesting the earlier part of your email, will respond
to that later. I'm not sure whether you're laying out the
purely pid-addressed approach as an alternative, or just
extensively arguing that the container should point to an
init_pid and not an nsproxy, or whether you are saying
something differently entirely which I still need to process.)
> > struct container {
> > struct container *parent;
> > char *name;
> > struct nsproxy *nsproxy;
> > struct list_head children;
> > };
> > struct nsproxy {
> > ...
> > struct container *container;
> > };
>
> For your chosen struct container I guess if the hierarchy are
> struct containers that will work. Going from your struct container
> to anything interesting is currently a walk through the process list
> which is painful. So I would suggest putting a pointer to the
> init process of the container, that is probably better than the
> nsproxy.
Main downside of that is that we then again expect the init
process to stick around.
And since we can have a new container without having a new pidspace,
it's not even limited to one "reserved" process per pidspace.
Imagine a system with 300 users logging in, each with a
polyinstantiated /tmp directory. So now you have 300 implicit
containers due to their sys_unshare(CLONE_NS), and each of
these containers points to and reserves the PAM process which
did the unshare?
> I'm not quite convinced we need the struct container. But I have
> no fundamental objects to it either.
I'm not convinced either. I stuck it in there mainly for
description of the idea.
Though as I mentioned in my response to Suka, there is the
issue of keeping container 'vserver1' around even if both
the original nsproxy and the init process for that vserver
are gone. Because so long as one of it's decendents still
exists, we should still be able to say "kill vserver1", and
kill all it's decendents.
(And here we may want to talk about unsharing the container
namespace so that /vserver1/vserver3 can become independent
of /vserver1, but I don't like the security implications of
that)
> > Plus of course relevant sysfs stuff.
>
> /proc is actually the appropriate filesystem for this sort of
> information not sysfs. Handling the network information that
> is in sysfs is going to be hard enough.
Ok, good point. In addition to actually being process info, that'll
also make it trivial (compared to sysfs) to present different
information depending on a process' container.
thanks,
-serge
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
|
Re: semantics for namespace naming [message #17057 is a reply to message #17048] |
Thu, 14 December 2006 18:59 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
serue
Messages: 750 Registered: February 2006
|
Senior Member |
|
|
Quoting Dave Hansen (haveblue@us.ibm.com):
> On Thu, 2006-12-14 at 09:36 -0600, Serge E. Hallyn wrote:
> > one container corresponds to one nsproxy which is one set of namespaces.
>
> On container has at least one nsproxy associated with it. Did you mean
> to say here that each container has one and only one nsproxy?
Sorry, that was struct container, not container.
Since the containers are hierarchical, you can say that a "container"
"has" all the nsproxies of all it's child containers.
So when there is a container for /vserver1, and from that vserver:
1. serge logs in and unshares the mount namespace for his
private /tmp and /home
2. dave starts a checkpointable job in a private container
The struct container for /vserver1 has just one nsproxy, but it has a
child container for serge's login, and a child container for dave's
checkpointable job, so you can say the vserver1 container has three
nsproxies.
> > As I said, once a process is in a container, it never leaves that
> > container. It only enters additional ones. That model fits everyone's
> > needs, without needing some funky API.
>
> This makes logical sense to me. In practice this has the feel of
> ptracing where the ptracer becomes a temporary parent of the tracee.
>
> The process entering a container temporarily becomes a member of that
> container, but it doesn't completely _stop_ being a member of its
> container. The real_parent of a process being ptraced may not be doing
> all of the parental duties during a ptrace, but it doesn't _stop_ being
> the real_parent.
>
> Maybe I'm stretching the analogy too far :)
Maybe, or maybe you're showing me a kink in my reasoning. I was in
fact thinking that entering a new container would be the one way
to fully disengage from the old container. Meaning it would be best
if it were forced to be done on a clone+exec. But even so, is that
reasonable?
-serge
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
Re: semantics for namespace naming [message #17063 is a reply to message #17047] |
Thu, 14 December 2006 21:24 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
ebiederm
Messages: 1354 Registered: February 2006
|
Senior Member |
|
|
"Serge E. Hallyn" <serue@us.ibm.com> writes:
> Quoting Eric W. Biederman (ebiederm@xmission.com):
>
> (still digesting the earlier part of your email, will respond
> to that later. I'm not sure whether you're laying out the
> purely pid-addressed approach as an alternative, or just
> extensively arguing that the container should point to an
> init_pid and not an nsproxy, or whether you are saying
> something differently entirely which I still need to process.)
Mostly I was thinking aloud, and trying to define the problem
we are trying to solve.
> Main downside of that is that we then again expect the init
> process to stick around.
>
> And since we can have a new container without having a new pidspace,
> it's not even limited to one "reserved" process per pidspace.
> Imagine a system with 300 users logging in, each with a
> polyinstantiated /tmp directory. So now you have 300 implicit
> containers due to their sys_unshare(CLONE_NS), and each of
> these containers points to and reserves the PAM process which
> did the unshare?
I guess if we want to think of those uses of namespaces as containers
there is a clear problem.
>> I'm not quite convinced we need the struct container. But I have
>> no fundamental objects to it either.
>
> I'm not convinced either. I stuck it in there mainly for
> description of the idea.
>
> Though as I mentioned in my response to Suka, there is the
> issue of keeping container 'vserver1' around even if both
> the original nsproxy and the init process for that vserver
> are gone. Because so long as one of it's decendents still
> exists, we should still be able to say "kill vserver1", and
> kill all it's decendents.
>
> (And here we may want to talk about unsharing the container
> namespace so that /vserver1/vserver3 can become independent
> of /vserver1, but I don't like the security implications of
> that)
Digesting things a little more.
If we are assigning names, there does seem to be value in
hierarchical names. My biggest objection is that if the
operation we really want to perform is kill vserver1 that
does not map very naturally to the current kill command.
As for making /vserver1/vserver3 independent of /vserver1 you need to
be outside of /vserver1 to do it and it probably just a move on your
magic filesystem. But having the ability for a process to leave
a container even if it is pulled out has all kinds of interesting
consequences, especially if you inadvertently remove a security
restriction by doing so.
>> > Plus of course relevant sysfs stuff.
>>
>> /proc is actually the appropriate filesystem for this sort of
>> information not sysfs. Handling the network information that
>> is in sysfs is going to be hard enough.
>
> Ok, good point. In addition to actually being process info, that'll
> also make it trivial (compared to sysfs) to present different
> information depending on a process' container.
Exactly.
Eric
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
Re: semantics for namespace naming [message #17065 is a reply to message #17057] |
Thu, 14 December 2006 21:56 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
ebiederm
Messages: 1354 Registered: February 2006
|
Senior Member |
|
|
"Serge E. Hallyn" <serue@us.ibm.com> writes:
> Quoting Dave Hansen (haveblue@us.ibm.com):
>> On Thu, 2006-12-14 at 09:36 -0600, Serge E. Hallyn wrote:
>> > As I said, once a process is in a container, it never leaves that
>> > container. It only enters additional ones. That model fits everyone's
>> > needs, without needing some funky API.
>>
>> This makes logical sense to me. In practice this has the feel of
>> ptracing where the ptracer becomes a temporary parent of the tracee.
>>
>> The process entering a container temporarily becomes a member of that
>> container, but it doesn't completely _stop_ being a member of its
>> container. The real_parent of a process being ptraced may not be doing
>> all of the parental duties during a ptrace, but it doesn't _stop_ being
>> the real_parent.
>>
>> Maybe I'm stretching the analogy too far :)
>
> Maybe, or maybe you're showing me a kink in my reasoning. I was in
> fact thinking that entering a new container would be the one way
> to fully disengage from the old container. Meaning it would be best
> if it were forced to be done on a clone+exec. But even so, is that
> reasonable?
What I am doing today is using ptrace to force a process in
the container to fork. Then I can remote control that forked
process using ptrace to do whatever I need to do.
Because that model fundamentally keeps every process in it's own
container and never allows it to leave, nor does it allow things
from one container to cross into another container in an uncontrolled
fashion this feels to me like a very safe model.
We probably want to enhance ptrace so that it is easier to get
a remote process to execute a system call for us so without having
to jump through hoops, to find a syscall instruction etc, but I
think it is a model that makes a lot of sense.
The only nasty case I have is how do you handle a login daemon
outside of your container wanting to spawn new processes inside of your
container.
A- login daemon B - container init
+ C - login child ---> + D - process spawned by login child (child of container init)
If your login daemon (A) spawns a child process (C) that you
want to place in a container you create process (D) a process
of peculiar heritage, living entirely in the container. In normal
situations the remote login does not terminate until D performs
the desired work.
Since C has done all it needs to do ideally it would then exit.
The problem is that if C exits the login daemon will normally
think that the work is done and terminate the login session.
Despite D holding open it's connection to the login session.
So in practice I have to keep C around doing the ptrace parent
think until D exits, so I can forward the exit code back to A. Not
bad but a little annoying.
Eric
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
Re: semantics for namespace naming [message #17066 is a reply to message #17016] |
Thu, 14 December 2006 13:58 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) ![Go to next message Go to next message](/theme/ovz3/images/down.png) |
Cedric Le Goater
Messages: 443 Registered: February 2006
|
Senior Member |
|
|
Serge E. Hallyn wrote:
> Let's say we have a vserver, from which we start some jobs
> which we want to checkpoint/restart/migrate. These are two
> of the usages we currently foresee for the namespaces, though
> I'd say it's safe to assume there will be more.
>
> I'll want to be able to address the c/r jobs by some ID in
> order to checkpoint and kill them. I'll also want to be
> able to address the entire vserver by some ID, in order to
> kill it. In that case the c/r jobs should also be killed.
> So those jobs are known by at least two id's. Furthermore, I
> may want two vservers on the same machine, both running a c/r
> job called 'calculate_pi'.
>
> So we can look at this as a filesystem. In the above scenario,
> we've got /sergesvserver, /sergesvserver/calculate_pi,
> /randomvserver, and /randomvserver/calculate_pi. And, if
> user hallyn logs into /sergesvserver using pam_namespace.so,
> unsharing his mounts namespace to get a private /tmp and /home,
> then he ends up in /sergesvserver/unnamed1. So each nsproxy
> has a node in the namespace id filesystem, with random names
> unless/until it is renamed to a more meaningful name. This
> allows us to switch to a vserver by specifying the vserver's
> name (ln /sys/namespaces/vserver1 /proc/nsproxy or whatever
> semantics we end up using), kill an entire vserver recursively
> (rm -rf /sys/namespaces/vserver1), perhaps even checkpoint
> (tar jcf /tarballs/vserver1 /sys/namespaces/vserver1) and
> certainly rename (mv /sys/namespaces/unnamed1 /sys/namespaces/sergeprivhome).
>
> One key observeration which I haven't made explicit is that you
> never actually leave a nsid ("container"). If you start under
> /vserver1, you will always be under /vserver1. I don't know of
> any reason that would not be appropriate. If I start a nested
> vserver from there, then to me it may be known as
> 'vserver_testme', while to the admin of the machine, it would be
> known as /vserver1/vserver_testme.
>
> This makes one possible implementation of the container struct:
>
> struct container {
> struct container *parent;
> char *name;
> struct nsproxy *nsproxy;
> struct list_head children;
> };
> struct nsproxy {
> ...
> struct container *container;
> };
>
> Plus of course relevant sysfs stuff.
I like the naming model. a few questions :
how do you enter only a subset of namespaces of a nsproxy/container
and not all of it ?
what flexibility the struct container is giving us ? why not have
container == nsproxy ?
the recursivity model looks like extra overhead. it could be flat.
C.
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
|
|
|
Re: semantics for namespace naming [message #17101 is a reply to message #17085] |
Wed, 20 December 2006 09:36 ![Go to previous message Go to previous message](/theme/ovz3/images/up.png) |
Cedric Le Goater
Messages: 443 Registered: February 2006
|
Senior Member |
|
|
Herbert Poetzl wrote:
> On Thu, Dec 14, 2006 at 09:36:31AM -0600, Serge E. Hallyn wrote:
>
> [lot of stuff zapped here]
>
>> Quoting Cedric Le Goater (clg@fr.ibm.com):
>>> how do you enter only a subset of namespaces of a nsproxy/container
>>> and not all of it ?
>> one container corresponds to one nsproxy which is one set of
>> namespaces. Are you asking how you would only switch your pid
>> namespace but keep your network namespace as the original?
>>
>> I'm not sure that's something we want/need to support.
>
> I can, we use this for several purposes, one is to
> extend or modify the VFS namespace by mounting or
> unmounting filesystems _into_ the guest
>
>> (Can you cite a use case?)
>
>> But since I haven't specified how to ask for the nsproxy switch
>> anyway, it's too early to ask how we add a flag to specify a
>> namespace subset :)
>
> we (Linux-VServer) extended the set/enter_namespace
> command to take a flag mask similar to unshare
> (only 64bit wide :) to allow for 'selecting' the
> proper spaces
>
> note: the nsproxy a context is referring to can also
> be changed this way, and a priviledged process can
> enter each guest space separately ...
I'll work on a clone64 and unshare64 in January. But did you take
a look at the bind_ns syscall to see how it fits with vserver ?
C.
_______________________________________________
Containers mailing list
Containers@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/containers
|
|
|
Goto Forum:
Current Time: Sun Sep 01 18:40:02 GMT 2024
Total time taken to generate the page: 0.05819 seconds
|