| Vlan и ошибки при старте vps [message #16336] |
Sat, 01 September 2007 13:12  |
dmdolg
Messages: 2
Registered: September 2007
|
Junior Member |
|
|
Доброго времени суток!
На HN 1 сетевая карта. На нее приходят 2 сети в разных vlan'ах.
После конфигурирования vlan'ов имена сетевых интерфейсов стали, допустим, vlan0002 и vlan0003.
Использую venet, т.к. на VPS'ах разделение на vlan'ы уже не актуально.
Теперь, при старте vps выводится:
Starting VPS ...
VPS is mounted
Adding IP address(es): 192.168.0.2
arpsend: can't get iface 'eth0' address : Cannot assign requested address
vps-net_add WARNING: arpsend -c 1 -w 1 -D -e 192.168.0.2 eth0 FAILED
arpsend: unknown iface vlan0002@eth0 : No such device
vps-net_add WARNING: arpsend -c 1 -w 1 -D -e 192.168.0.2 vlan0002@eth0 FAILED
arpsend: unknown iface vlan0003@eth0 : No such device
vps-net_add WARNING: arpsend -c 1 -w 1 -D -e 192.168.0.2 vlan0003@eth0 FAILED
cat: /proc/sys/net/ipv4/conf/eth0/proxy_arp: No such file or directory
/usr/lib/vzctl/scripts/vps-functions: line 111: [: ==: unary operator expected
cat: /proc/sys/net/ipv4/conf/vlan0002@eth0/proxy_arp: No such file or directory
/usr/lib/vzctl/scripts/vps-functions: line 111: [: ==: unary operator expected
cat: /proc/sys/net/ipv4/conf/vlan0003@eth0/proxy_arp: No such file or directory
/usr/lib/vzctl/scripts/vps-functions: line 111: [: ==: unary operator expected
arpsend: can't get iface 'eth0' address : Cannot assign requested address
vps-net_add WARNING: arpsend -c 1 -w 1 -U -i 192.168.0.2 -e 192.168.0.2 eth0 FAILED
arpsend: unknown iface vlan0002@eth0 : No such device
vps-net_add WARNING: arpsend -c 1 -w 1 -U -i 192.168.0.2 -e 192.168.0.2 vlan0002@eth0 FAILED
arpsend: unknown iface vlan0003@eth0 : No such device
vps-net_add WARNING: arpsend -c 1 -w 1 -U -i 192.168.0.2 -e 192.168.0.2 vlan0003@eth0 FAILED
Setting CPU units: 26646
Set hostname: test.vz.localdomain
File resolv.conf was modified
VPS start in progress...
При стопе vps
Stopping VPS ...
VPS was stopped
cat: /proc/sys/net/ipv4/conf/eth0/proxy_arp: No such file or directory
/usr/lib/vzctl/scripts/vps-functions: line 111: [: ==: unary operator expected
cat: /proc/sys/net/ipv4/conf/vlan0002@eth0/proxy_arp: No such file or directory
/usr/lib/vzctl/scripts/vps-functions: line 111: [: ==: unary operator expected
cat: /proc/sys/net/ipv4/conf/vlan0003@eth0/proxy_arp: No such file or directory
/usr/lib/vzctl/scripts/vps-functions: line 111: [: ==: unary operator expected
VPS is unmounted
Надо сказать, что при этом, вроде бы, все работает нормально. Просто, на сколько я понимаю, не удается прочитать и проверить параметры конфигурации сетевых интерфейсов, т.к. используется неверное название.
Можно ли этого как-нибудь избежать?
Заранее спасибо!
|
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
