OpenVZ Forum


Home » General » Support » OpenVZ strange lockups and reboots
Re: OpenVZ strange lockups and reboots [message #15760 is a reply to message #15757] Sat, 11 August 2007 03:35 Go to previous messageGo to previous message
newwave is currently offline  newwave
Messages: 3
Registered: August 2007
Junior Member
Thanks for the idea. I have never used netconsole but heard good things about it. I loaded it but I am not sure it is working. I am not seeing any kernel messages from boot when i put the following in /etc/rc.d/rc.sysinit (on a test system):

echo -n netconsole
/sbin/modprobe netconsole netconsole=4444@192.168.0.200/eth0,6666@192.168.0.66/00:D0:B7:46:BC:DA

I have 192.168.0.66 listening with "netcat -l -p 6666 -u". netconsole is showing on 192.168.0.200 with lsmod.

My test system is at home. The hardware node with the problem is actaully over 2000 miles away, so swapping hardware is not really an option :-\ On the hardware with the lockup issue, i just ran

sudo modprobe netconsole netconsole=4444@x.x.x.228/eth0,6666@x.x.x.128/00:0A:95:84:93:A2

and it shows up in lsmod but i haven't seen any kernel messages as of yet. Now i just wait for another lockup.

My question is, will netconsole work over the WAN? I don't have another box in that data center.

Btw I found these pages after i posted. Sorry i didn't see these first. I will try memtester one night but i can't boot to Memtest86+:

http://wiki.openvz.org/Hardware_testing
http://wiki.openvz.org/Remote_console_setup

Thanks again, and i will wait for another crash unless you can see something wrong with my modprobe stuff.

Adam Salowitz



 
Read Message icon9.gif
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: ovzkernel-devel for 2.6.9
Next Topic: CentOS 5 x86_64 template metadata or precreated template?
Goto Forum:
  


Current Time: Sun Jul 14 16:36:05 GMT 2024

Total time taken to generate the page: 0.02285 seconds