#cat /proc/sys/net/ipv4/ip_forward
0

# cat /etc/sysctl.conf
#
# /etc/sysctl.conf - Configuration file for setting system variables
# See sysctl.conf (5) for information.
#

#kernel.domainname = example.com
#net/ipv4/icmp_echo_ignore_broadcasts=1

# Uncomment the following to stop low-level messages on console
#kernel.printk = 4 4 1 7

##############################################################3
# Functions previously found in netbase
#

# Uncomment the next line to enable Spoof protection (reverse-path filter)
#net.ipv4.conf.default.rp_filter=1

# Uncomment the next line to enable TCP/IP SYN cookies
#net.ipv4.tcp_syncookies=1

# Uncomment the next line to enable packet forwarding for IPv4
#net.ipv4.conf.default.forwarding=1

# Uncomment the next line to enable packet forwarding for IPv6
#net.ipv6.conf.default.forwarding=1
    
#-- OpenVZ begin --#

# On Hardware Node we generally need
# packet forwarding enabled and proxy arp disabled
net.ipv4.conf.default.forwarding=1
net.ipv4.conf.default.proxy_arp = 0

# Enables source route verification
net.ipv4.conf.all.rp_filter = 1

# Enables the magic-sysrq key
kernel.sysrq = 1

# TCP Explict Congestion Notification
#net.ipv4.tcp_ecn = 0

# we do not want all our interfaces to send redirects
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.all.send_redirects = 0

#-- OpenVZ end --#