Home » General » Support » *KNOWN ISSUE* Problems with online migration on 031 kernel
*KNOWN ISSUE* Problems with online migration on 031 kernel [message #14780] |
Tue, 10 July 2007 12:48 |
draga
Messages: 20 Registered: July 2007
|
Junior Member |
|
|
Hello everybody. Thanks to this forum's people I could successfully migrate my Via EPIA server into a wonderful VPS. It works like a charm and I'm able to offline migrate it between my desktop (amd64) and my laptop (i386) in few minutes.
Now I'll put back a small OpenVZ minimal system on the Epia, ready to be pushed back.
I have one problem with online migration... here's the result:
root@desktop:~# vzmigrate -r no --keep-dst --online -v 192.168.5.146 2000
OPT:-r
OPT:--keep-dst
OPT:--online
OPT:-v
OPT:192.168.5.146
Starting online migration of VE 2000 on 192.168.5.146
OpenVZ is running...
Loading /etc/vz/vz.conf and /etc/vz/conf/2000.conf files
Check IPs on destination node: 192.168.200.101
Preparing remote node
Copying config file
2000.conf 100% 2043 2.0KB/s 00:00
Saved parameters for VE 2000
Warning: too large value for VMGUARPAGES=9223372036854775807:9223372036854775807 was truncated
Warning: too large value for OOMGUARPAGES=6144:9223372036854775807 was truncated
Warning: too large value for PRIVVMPAGES=9223372036854775807:9223372036854775807 was truncated
Warning: too large value for PHYSPAGES=0:9223372036854775807 was truncated
Creating remote VE root dir
Creating remote VE private dir
VZ disk quota disabled -- skipping quota migration
Syncing private
Live migrating VE
Suspending VE
Setting up checkpoint...
suspend...
Can not suspend VE: Device or resource busy
file on unsupported FS: magic 0bad1dea
Checkpointing failed
Error: Failed to suspend VE
-.-.-.-.-.
The warnings I think are folded to different archs (amd64 and i386) between desktop and laptop. But...what does it happen? Why does it fail?
Google didn't help... thank you!
[Updated on: Wed, 11 July 2007 07:43] by Moderator Report message to a moderator
|
|
|
|
|
|
Re: Problems with online migration [message #14788 is a reply to message #14786] |
Tue, 10 July 2007 17:05 |
draga
Messages: 20 Registered: July 2007
|
Junior Member |
|
|
Thank you!
Here's the /proc/mounts:
HN in which the VE is running (the source machine):
epia:~# cat /proc/mounts
none /sys sysfs rw,nosuid,nodev,noexec 0 0
none /proc proc rw,nosuid,nodev,noexec 0 0
udev /dev tmpfs rw 0 0
/dev/hdb3 / ext3 rw,data=ordered 0 0
/dev/hdb3 /dev/.static/dev ext3 rw,data=ordered 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid 0 0
usbfs /proc/bus/usb usbfs rw,nosuid,nodev,noexec 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec 0 0
/var/lib/vz/private/2000 /var/lib/vz/root/2000 simfs rw 0 0
tmpfs /var/lib/vz/root/2000/lib/init/rw tmpfs rw,nosuid 0 0
proc /var/lib/vz/root/2000/proc proc rw,nosuid,nodev,noexec 0 0
sysfs /var/lib/vz/root/2000/sys sysfs rw,nosuid,nodev,noexec 0 0
tmpfs /var/lib/vz/root/2000/dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /var/lib/vz/root/2000/dev/pts devpts rw,nosuid,noexec 0 0
VE's /proc/mounts:
server:~# cat /proc/mounts
simfs / simfs rw 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid 0 0
proc /proc proc rw,nosuid,nodev,noexec 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec 0 0
Destination HN:
root@laptop:/# cat /proc/mounts
none /sys sysfs rw,nosuid,nodev,noexec 0 0
none /proc proc rw,nosuid,nodev,noexec 0 0
udev /dev tmpfs rw 0 0
/dev/hda2 / ext3 rw,noatime,nodiratime,data=ordered 0 0
/dev/hda2 /dev/.static/dev ext3 rw,data=ordered 0 0
tmpfs /var/run tmpfs rw,nosuid,nodev,noexec 0 0
tmpfs /var/lock tmpfs rw,nosuid,nodev,noexec 0 0
tmpfs /dev/shm tmpfs rw 0 0
devpts /dev/pts devpts rw 0 0
usbfs /dev/bus/usb/.usbfs usbfs rw 0 0
udev /proc/bus/usb tmpfs rw 0 0
usbfs /proc/bus/usb/.usbfs usbfs rw 0 0
fusectl /sys/fs/fuse/connections fusectl rw 0 0
tmpfs /var/run tmpfs rw,nosuid,nodev,noexec 0 0
tmpfs /var/lock tmpfs rw,nosuid,nodev,noexec 0 0
binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
Vasily Tarasov wrote on Tue, 10 July 2007 11:41 | Thanks. Can you, please, post the output of `cat /proc/mounts`
inside this VE and on HN?
Thanks,
Vasily.
|
[Updated on: Wed, 11 July 2007 06:25] by Moderator Report message to a moderator
|
|
|
|
|
Goto Forum:
Current Time: Sun Sep 15 15:54:38 GMT 2024
Total time taken to generate the page: 0.03417 seconds
|