Home » Mailing lists » Devel » PPC64 fairsched_chwt: No such file or directory
| PPC64 fairsched_chwt: No such file or directory [message #13306] |
Thu, 24 May 2007 14:48  |
Christian Kaiser2
Messages: 27
Registered: May 2007
|
Junior Member |
|
|
Hi all,
as I mentioned already yesterday I get this error when I try to start the
OpenVZ service:
[root@s10b10-0 ~]# /etc/init.d/vz start
Starting OpenVZ: [ OK ]
Bringing up interface venet0: [ OK ]
Configuring interface venet0: [ OK ]
vzctl set 0 --cpuunits 1000 failed: Setting CPU units: 1000
fairsched_chwt: No such file or directory
WARNING: Settings were not saved and will be resetted to or[FAILED]alues on
next start (use --save flag)
I tried the latest kernels 2.6.18 and 2.6.20 with CONFIG_SCHED_VCPU=y and
CONFIG_FAIRSCHED=y
For both kernels the vzctl command ends up with the same error.
Can someone explain me why it is searching for a file or directory? Is
fairsched_chwt a device?
Mit freundlichen Grüßen / Best Regards
Christian Kaiser
--
IBM Deutschland Entwicklung GmbH
Open Systems Firmware Development
mail: ckaiser2@de.ibm.com
IBM Deutschland Entwicklung GmbH
Vorsitzender des Aufsichtsrats: Martin Jetter
Geschäftsführung: Herbert Kircher
Sitz der Gesellschaft: Böblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
|
|
|
|
| Re: PPC64 fairsched_chwt: No such file or directory [message #13308 is a reply to message #13306] |
Thu, 24 May 2007 15:10  |
|
|
Can you check the value of __NR_fairsched_chwt in vzctl? It is defined
in include/vzsyscalls.h depending on your architecture. For ppc it
should be 402 (same as in kernel's include/asm-powerpc/unistd.h). In
case these numbers are different things will go wrong.
You can easily check it the number using strace, like this:
# strace vzctl set 0 --cpuunits 1000 2>&1 | grep syscall
Christian Kaiser2 wrote:
> Hi all,
>
> as I mentioned already yesterday I get this error when I try to start the
> OpenVZ service:
>
> [root@s10b10-0 ~]# /etc/init.d/vz start
> Starting OpenVZ: [ OK ]
> Bringing up interface venet0: [ OK ]
> Configuring interface venet0: [ OK ]
> vzctl set 0 --cpuunits 1000 failed: Setting CPU units: 1000
> fairsched_chwt: No such file or directory
> WARNING: Settings were not saved and will be resetted to or[FAILED]alues on
> next start (use --save flag)
>
> I tried the latest kernels 2.6.18 and 2.6.20 with CONFIG_SCHED_VCPU=y and
> CONFIG_FAIRSCHED=y
> For both kernels the vzctl command ends up with the same error.
>
> Can someone explain me why it is searching for a file or directory? Is
> fairsched_chwt a device?
>
> Mit freundlichen Grüßen / Best Regards
> Christian Kaiser
> --
> IBM Deutschland Entwicklung GmbH
> Open Systems Firmware Development
> mail: ckaiser2@de.ibm.com
>
> IBM Deutschland Entwicklung GmbH
> Vorsitzender des Aufsichtsrats: Martin Jetter
> Geschäftsführung: Herbert Kircher
> Sitz der Gesellschaft: Böblingen
> Registergericht: Amtsgericht Stuttgart, HRB 243294
>
>
|
|
|
|
| Re: PPC64 fairsched_chwt: No such file or directory [message #13349 is a reply to message #13308] |
Fri, 25 May 2007 07:15 |
Christian Kaiser2
Messages: 27
Registered: May 2007
|
Junior Member |
|
|
Kir Kolyshkin <kir@openvz.org> wrote on 05/24/2007 05:10:54 PM:
> Can you check the value of __NR_fairsched_chwt in vzctl? It is defined
> in include/vzsyscalls.h depending on your architecture. For ppc it
> should be 402 (same as in kernel's include/asm-powerpc/unistd.h). In
> case these numbers are different things will go wrong.
I checked on that. The same value 402 defined in both header-files.
> You can easily check it the number using strace, like this:
> # strace vzctl set 0 --cpuunits 1000 2>&1 | grep syscall
[root@s10b10-0 ~]# strace vzctl set 0 --cpuunits 1000 2>&1 | grep syscall
no output and without the grep pipe:
[root@s10b10-0 ~]# strace vzctl set 0 --cpuunits 1000
execve("/usr/local/sbin/vzctl", ["vzctl", "set", "0", "--cpuunits",
"1000"], [/* 22 vars */]) = 0
brk(0) = 0x1001a000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0
access(umovestr: Input/output error
0x58596cc0, R_OK) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
stat(umovestr: Input/output error
0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
stat(umovestr: Input/output error
0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
stat(umovestr: Input/output error
0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
stat(umovestr: Input/output error
0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
stat(umovestr: Input/output error
0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
stat(umovestr: Input/output error
0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
stat(umovestr: Input/output error
0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0xffd6c380, O_RDONLY) = 3
read(3, ptrace: umoven: Input/output error
0xffd6c5a8, 832) = 832
fstat(3, ptrace: umoven: Input/output error
{...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x1000
mmap(NULL, 218136, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0x2000
mprotect(0x31000, 4096, PROT_NONE) = 0
mmap(0x32000, 16384, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x30000) = 0x32000
mmap(0x36000, 5144, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x36000
close(3) = 0
open(umovestr: Input/output error
0xffd6c360, O_RDONLY) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0x58597378, O_RDONLY) = 3
fstat(3, ptrace: umoven: Input/output error
{...}) = 0
mmap(NULL, 36337, PROT_READ, MAP_PRIVATE, 3, 0) = 0x38000
close(3) = 0
open(umovestr: Input/output error
0x3f9a5, O_RDONLY) = 3
read(3, ptrace: umoven: Input/output error
0xffd6c578, 832) = 832
fstat(3, ptrace: umoven: Input/output error
{...}) = 0
mmap(0x58770000, 132584, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x58770000
mprotect(0x58774000, 110592, PROT_NONE) = 0
mmap(0x5878f000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x5878f000
close(3) = 0
open(umovestr: Input/output error
0xffd6c330, O_RDONLY) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0x3c652, O_RDONLY) = 3
read(3, ptrace: umoven: Input/output error
0xffd6c548, 832) = 832
fstat(3, ptrace: umoven: Input/output error
{...}) = 0
mmap(0x58900000, 132280, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x58900000
mprotect(0x58903000, 114688, PROT_NONE) = 0
mmap(0x5891f000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x5891f000
close(3) = 0
open(umovestr: Input/output error
0xffd6c300, O_RDONLY) = -1 ENOENT (No such file or directory)
open(umovestr: Input/output error
0x401a1, O_RDONLY) = 3
read(3, ptrace: umoven: Input/output error
0xffd6c518, 832) = 832
fstat(3, ptrace: umoven: Input/output error
{...}) = 0
mmap(0x585c0000, 1717776, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE,
3, 0) = 0x585c0000
mprotect(0x5873f000, 53248, PROT_NONE) = 0
mmap(0x5874c000, 81920, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x18c000) = 0x5874c000
mmap(0x58760000, 13840, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x58760000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x41000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x42000
mprotect(0x5874c000, 16384, PROT_READ) = 0
mprotect(0x5891f000, 4096, PROT_READ) = 0
mprotect(0x5878f000, 4096, PROT_READ) = 0
mprotect(0x585af000, 4096, PROT_READ) = 0
munmap(0x38000, 36337) = 0
brk(0) = 0x1001a000
brk(0x1003b000) = 0x1003b000
rt_sigaction(SIGPIPE, ptrace: umoven: Input/output error
{...}, NULL, 8) = 0
open("/usr/local/lib/vzctl/modules/",
O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3
fstat(3, ptrace: umoven: Input/output error
{...}) = 0
fcntl(3, F_SETFD, FD_CLOEXEC) = 0
getdents(3, /* d_reclen == 0, problem here *//* 0 entries */, 4096) = 48
stat(umovestr: Input/output error
0xffd6d120, ptrace: umoven: Input/output error
{...}) = 0
stat(umovestr: Input/output error
0xffd6d120, ptrace: umoven: Input/output error
{...}) = 0
getdents(3, /* 0 entries */, 4096) = 0
close(3) = 0
open("/usr/local/etc/vz/vz.conf", O_RDONLY) = 3
stat("/usr/local/etc/vz/vz.conf", ptrace: umoven: Input/output error
{...}) = 0
fstat(3, ptrace: umoven: Input/output error
{...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x38000
read(3, ptrace: umoven: Input/output error
0x38000, 4096) = 709
read(3, "", 4096) = 0
close(3) = 0
munmap(0x38000, 4096) = 0
open("/var/log/vzctl.log", O_WRONLY|O_APPEND|O_CREAT, 0666) = 3
fstat(3, ptrace: umoven: Input/output error
{...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x38000
fstat(3, ptrace: umoven: Input/output error
{...}) = 0
lseek(3, 8142, SEEK_SET) = 8142
stat(umovestr: Input/output error
0xffd6d370, ptrace: umoven: Input/output error
{...}) = 0
open(umovestr: Input/output error
0xffd6d370, O_RDONLY) = 4
stat(umovestr: Input/output error
0xffd6d370, ptrace: umoven: Input/output error
{...}) = 0
fstat(4, ptrace: umoven: Input/output error
{...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x39000
read(4, ptrace: umoven: Input/output error
0x39000, 4096) = 228
read(4, "", 4096) = 0
close(4) = 0
munmap(0x39000, 4096) = 0
fcntl(0, F_GETFL) = 0x2 (flags O_RDWR)
fcntl(1, F_GETFL) = 0x2 (flags O_RDWR)
fcntl(2, F_GETFL) = 0x2 (flags O_RDWR)
open(umovestr: Input/output error
0x2e380, O_RDWR) = 4
ioctl(4, 0x800c2e05, 0xffd6cbf0) = 0
stat("/vz/lock", ptrace: umoven: Input/output error
{...}) = 0
getpid() = 29239
open(umovestr: Input/output error
0xffd6c868, O_RDWR|O_CREAT|O_EXCL, 0600) = 5
write(5, ptrace: umoven: Input/output error
0xffd6c468, 7) = 7
close(5) = 0
link(umovestr: Input/output error
0xffd6c868, umovestr: Input/output error
0xffd6c668) = 0
unlink(umovestr: Input/output error
0xffd6c868) = 0
rt_sigaction(SIGINT, ptrace: umoven: Input/output error
{...}, NULL, 8) = 0
fstat(1, ptrace: umoven: Input/output error
{...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x39000
write(1, ptrace: umoven: Input/output error
0x39000, 24Setting CPU units: 1000
) = 24
time(NULL) = 1182235377
open(umovestr: Input/output error
0x5872fa78, O_RDONLY) = 5
fstat(5, ptrace: umoven: Input/output error
{...}) = 0
fstat(5, ptrace: umoven: Input/output error
{...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x3a000
read(5, ptrace: umoven: Input/output error
0x3a000, 4096) = 837
close(5) = 0
munmap(0x3a000, 4
...
|
|
|
|
| Re: PPC64 fairsched_chwt: No such file or directory [message #13381 is a reply to message #13349] |
Fri, 25 May 2007 11:43 |
|
|
I guess you have to use strace64 or smth like this.
Christian Kaiser2 wrote:
> Kir Kolyshkin <kir@openvz.org> wrote on 05/24/2007 05:10:54 PM:
>
>
>> Can you check the value of __NR_fairsched_chwt in vzctl? It is defined
>> in include/vzsyscalls.h depending on your architecture. For ppc it
>> should be 402 (same as in kernel's include/asm-powerpc/unistd.h). In
>> case these numbers are different things will go wrong.
>>
>
> I checked on that. The same value 402 defined in both header-files.
>
>
>> You can easily check it the number using strace, like this:
>> # strace vzctl set 0 --cpuunits 1000 2>&1 | grep syscall
>>
>
> [root@s10b10-0 ~]# strace vzctl set 0 --cpuunits 1000 2>&1 | grep syscall
>
> no output and without the grep pipe:
>
> [root@s10b10-0 ~]# strace vzctl set 0 --cpuunits 1000
> execve("/usr/local/sbin/vzctl", ["vzctl", "set", "0", "--cpuunits",
> "1000"], [/* 22 vars */]) = 0
> brk(0) = 0x1001a000
> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0
> access(umovestr: Input/output error
> 0x58596cc0, R_OK) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
> stat(umovestr: Input/output error
> 0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
> stat(umovestr: Input/output error
> 0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
> stat(umovestr: Input/output error
> 0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
> stat(umovestr: Input/output error
> 0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
> stat(umovestr: Input/output error
> 0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
> stat(umovestr: Input/output error
> 0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0xffd6c380, O_RDONLY) = -1 ENOENT (No such file or directory)
> stat(umovestr: Input/output error
> 0xffd6c380, 0xffd6c3d0) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0xffd6c380, O_RDONLY) = 3
> read(3, ptrace: umoven: Input/output error
> 0xffd6c5a8, 832) = 832
> fstat(3, ptrace: umoven: Input/output error
> {...}) = 0
> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0x1000
> mmap(NULL, 218136, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
> 0x2000
> mprotect(0x31000, 4096, PROT_NONE) = 0
> mmap(0x32000, 16384, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x30000) = 0x32000
> mmap(0x36000, 5144, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x36000
> close(3) = 0
> open(umovestr: Input/output error
> 0xffd6c360, O_RDONLY) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0x58597378, O_RDONLY) = 3
> fstat(3, ptrace: umoven: Input/output error
> {...}) = 0
> mmap(NULL, 36337, PROT_READ, MAP_PRIVATE, 3, 0) = 0x38000
> close(3) = 0
> open(umovestr: Input/output error
> 0x3f9a5, O_RDONLY) = 3
> read(3, ptrace: umoven: Input/output error
> 0xffd6c578, 832) = 832
> fstat(3, ptrace: umoven: Input/output error
> {...}) = 0
> mmap(0x58770000, 132584, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
> 0) = 0x58770000
> mprotect(0x58774000, 110592, PROT_NONE) = 0
> mmap(0x5878f000, 8192, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x5878f000
> close(3) = 0
> open(umovestr: Input/output error
> 0xffd6c330, O_RDONLY) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0x3c652, O_RDONLY) = 3
> read(3, ptrace: umoven: Input/output error
> 0xffd6c548, 832) = 832
> fstat(3, ptrace: umoven: Input/output error
> {...}) = 0
> mmap(0x58900000, 132280, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
> 0) = 0x58900000
> mprotect(0x58903000, 114688, PROT_NONE) = 0
> mmap(0x5891f000, 8192, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x5891f000
> close(3) = 0
> open(umovestr: Input/output error
> 0xffd6c300, O_RDONLY) = -1 ENOENT (No such file or directory)
> open(umovestr: Input/output error
> 0x401a1, O_RDONLY) = 3
> read(3, ptrace: umoven: Input/output error
> 0xffd6c518, 832) = 832
> fstat(3, ptrace: umoven: Input/output error
> {...}) = 0
> mmap(0x585c0000, 1717776, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE,
> 3, 0) = 0x585c0000
> mprotect(0x5873f000, 53248, PROT_NONE) = 0
> mmap(0x5874c000, 81920, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x18c000) = 0x5874c000
> mmap(0x58760000, 13840, PROT_READ|PROT_WRITE,
> MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x58760000
> close(3) = 0
> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0x41000
> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0x42000
> mprotect(0x5874c000, 16384, PROT_READ) = 0
> mprotect(0x5891f000, 4096, PROT_READ) = 0
> mprotect(0x5878f000, 4096, PROT_READ) = 0
> mprotect(0x585af000, 4096, PROT_READ) = 0
> munmap(0x38000, 36337) = 0
> brk(0) = 0x1001a000
> brk(0x1003b000) = 0x1003b000
> rt_sigaction(SIGPIPE, ptrace: umoven: Input/output error
> {...}, NULL, 8) = 0
> open("/usr/local/lib/vzctl/modules/",
> O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 3
> fstat(3, ptrace: umoven: Input/output error
> {...}) = 0
> fcntl(3, F_SETFD, FD_CLOEXEC) = 0
> getdents(3, /* d_reclen == 0, problem here *//* 0 entries */, 4096) = 48
> stat(umovestr: Input/output error
> 0xffd6d120, ptrace: umoven: Input/output error
> {...}) = 0
> stat(umovestr: Input/output error
> 0xffd6d120, ptrace: umoven: Input/output error
> {...}) = 0
> getdents(3, /* 0 entries */, 4096) = 0
> close(3) = 0
> open("/usr/local/etc/vz/vz.conf", O_RDONLY) = 3
> stat("/usr/local/etc/vz/vz.conf", ptrace: umoven: Input/output error
> {...}) = 0
> fstat(3, ptrace: umoven: Input/output error
> {...}) = 0
> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0x38000
> read(3, ptrace: umoven: Input/output error
> 0x38000, 4096) = 709
> read(3, "", 4096) = 0
> close(3) = 0
> munmap(0x38000, 4096) = 0
> open("/var/log/vzctl.log", O_WRONLY|O_APPEND|O_CREAT, 0666) = 3
> fstat(3, ptrace: umoven: Input/output error
> {...}) = 0
> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0x38000
> fstat(3, ptrace: umoven: Input/output error
> {...}) = 0
> lseek(3, 8142, SEEK_SET) = 8142
> stat(umovestr: Input/output error
> 0xffd6d370, ptrace: umoven: Input/output error
> {...}) = 0
> open(umovestr: Input/output error
> 0xffd6d370, O_RDONLY) = 4
> stat(umovestr: Input/output error
> 0xffd6d370, ptrace: umoven: Input/output error
> {...}) = 0
> fstat(4, ptrace: umoven: Input/output error
> {...}) = 0
> mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0x39000
> read(4, ptrace: umoven: Input/output error
> 0x39000, 4096) = 228
> read(4, "", 4096) = 0
> close(4) = 0
> munmap(0x39000, 4096) = 0
> fcntl(0, F_GETFL) = 0x2 (flags O_RDWR)
> fcntl(1, F_GETFL) = 0x2 (flags O_RDWR)
> fcntl(2, F_GETFL) = 0x2 (flags O_RDWR)
> open(umovestr: Input/output error
> 0x2e380, O_RDWR) = 4
> ioctl(4, 0x800c2e05, 0xffd6cbf0) = 0
> stat("/vz/lock", ptrace: umoven: Input/output error
> {...}) = 0
> getpid() = 29239
> open(umovestr: Input/output error
> 0xffd6c868, O_RDWR|O_CREAT|O_EXCL, 0600) = 5
> write(5, ptrace: umoven: Input/output error
> 0xffd6c468, 7)
...
|
|
|
|
Goto Forum:
Current Time: Sat Nov 16 22:33:12 GMT 2024
Total time taken to generate the page: 0.03047 seconds
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
