OpenVZ Forum: Support » *SOLVED* ISDN PRI with OpenVZ

Home » General » Support » *SOLVED* ISDN PRI with OpenVZ

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

*SOLVED* ISDN PRI with OpenVZ [message #12760]

Wed, 09 May 2007 06:41

shmaize
Messages: 2
Registered: May 2007

Junior Member

Hi folks

I have a Sangoma A102 PCI ISDN PRI card. Can I install and use that hardware under OpenVZ?

[Updated on: Mon, 14 May 2007 09:24] by Moderator

Report message to a moderator

Re: ISDN PRI with OpenVZ [message #12772 is a reply to message #12760]

Wed, 09 May 2007 07:24

Vasily Tarasov
Messages: 1345
Registered: January 2006

Senior Member

Does this hardware work on your current distribution? What is you currunt distribution? What kernel is used in it? Please, post the output of these two commands:

# lspci
# lspci -n

Thank you,
Vasily.

Report message to a moderator

Re: ISDN PRI with OpenVZ [message #12789 is a reply to message #12772]

Wed, 09 May 2007 14:05

shmaize
Messages: 2
Registered: May 2007

Junior Member

[root@aster wanpipe]# lspci
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 LE (rev a1)
06:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
06:02.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
06:03.0 Network controller: Sangoma Technologies Corp. A101 single-port T1/E1 (rev 01)

[root@aster wanpipe]# lspci -n
00:00.0 0600: 8086:2580
00:01.0 0604: 8086:2581
00:1b.0 0403: 8086:2668 (rev 03)
00:1c.0 0604: 8086:2660 (rev 03)
00:1c.1 0604: 8086:2662 (rev 03)
00:1c.2 0604: 8086:2664 (rev 03)
00:1c.3 0604: 8086:2666 (rev 03)
00:1d.0 0c03: 8086:2658 (rev 03)
00:1d.1 0c03: 8086:2659 (rev 03)
00:1d.2 0c03: 8086:265a (rev 03)
00:1d.3 0c03: 8086:265b (rev 03)
00:1d.7 0c03: 8086:265c (rev 03)
00:1e.0 0604: 8086:244e (rev d3)
00:1f.0 0601: 8086:2640 (rev 03)
00:1f.1 0101: 8086:266f (rev 03)
00:1f.2 0101: 8086:2651 (rev 03)
00:1f.3 0c05: 8086:266a (rev 03)
01:00.0 0300: 10de:01d1 (rev a1)
06:01.0 0200: 10b7:9200 (rev 74)
06:02.0 0200: 1186:1300 (rev 10)
06:03.0 0280: 1923:0300 (rev 01)

The Sangoma works with my currect distribution (Fedora Core 6, 2.6.19-1.2911.6.5.fc6).

Report message to a moderator

Re: ISDN PRI with OpenVZ [message #12822 is a reply to message #12789]

Fri, 11 May 2007 07:30

Vasily Tarasov
Messages: 1345
Registered: January 2006

Senior Member

Hello,

Driver for Sangoma A101 is not included in vanilla or RHEL5 kernels, so this device isn't supported from the box.

But, as usually in Linux world, you can compile drivers for this device against OpenVZ kernel by yourself. You should install -devel package of OpenVZ kernel, download Sangoma A101 driver sources from http://wiki.sangoma.com/wanpipe-linux-drivers and then compile driver.

HTH,
Vasily

Report message to a moderator

Previous Topic:	SOLVED Connect VE to two different networks on two different NIC's
Next Topic:	how can I patch OVZ kernel 2.6.12--28stab024 to last kernel stab

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 17 11:32:29 GMT 2024

Total time taken to generate the page: 0.02900 seconds