| *SOLVED* Communication between HN and VE [message #12600] |
Thu, 03 May 2007 19:56  |
chase
Messages: 4
Registered: May 2007
|
Junior Member |
|
|
I have a HN with 2 physical interfaces and I have a problem. Should I be able to communicate from the HN to the VE?
Hardware Node
-------------
eth0: public ip, but not currently connected to a switch (preping this box to go to the data center)
eth1: private ip 10.1.5.50/16, connected to a local lan with a NAT/Gateway on 10.1.1.220
venet0: doesn't show any ip
VE 101
------
venet0: 127.0.0.1
venet0:0 with 10.1.5.51/32
I can not ping the HN from the VE or the VE from the HN. Both the VE and the HN can communicate to any other machine on the local lan, both the VE and the HN can access the internet. Why can't the HN and the VE talk?
EDIT: I reduced the HN to just on interface, eth0 with 10.1.5.50 as an address. Still no communication between the HN and the VE.
[Updated on: Mon, 07 May 2007 06:29] by Moderator Report message to a moderator |
|
|
|
| Re: Communication between HN and VE [message #12666 is a reply to message #12600] |
Sun, 06 May 2007 22:25  |
chase
Messages: 4
Registered: May 2007
|
Junior Member |
|
|
Can anybody just tell me if you can normally communicate from a VE (VE101) to the Hardware Node (VE0)? I'm using venet as outlined in all the basic setup tutorials. Access to the internet is working from the hardware node and the VE, I just can't seem to make the two talk. IS THIS NORMAL?
[Updated on: Sun, 06 May 2007 22:28] Report message to a moderator |
|
|
|
|
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
