Home » Mailing lists » Users » 2nd interface loses packets on using veth
| 2nd interface loses packets on using veth [message #11179] |
Thu, 15 March 2007 03:16  |
Julian Yap
Messages: 4
Registered: March 2007
|
Junior Member |
|
|
Kind of related to my previous posting.
I've now setup my 2 VE interfaces using veth method.
No longer using Source based routing, I've set up my default route to
be 192.168.0.1.
Pinging on the 192.168.0.x subnet is perfect from the VE.
Pinging on my VE's 2nd interface (eth1) works OK in burst but at times
just drops packets.
Running a tcpdump, I see a log of these messages:
17:10:29.813495 arp who-has machine15 tell 192.168.1.247
When it does work OK, it's because it's returned this:
17:14:35.829082 arp who-has machine15 tell 192.168.100.247
17:14:36.828053 arp who-has machine13 tell machine15
...
17:14:36.828082 arp reply machine13 is-at 00:16:3e:7e:a5:2e
Any clues why it arp's so much?
- Julian
|
|
|
|
|
|
| Re: 2nd interface loses packets on using veth [message #11233 is a reply to message #11181] |
Thu, 15 March 2007 18:16  |
Julian Yap
Messages: 4
Registered: March 2007
|
Junior Member |
|
|
Thanks.
HOST: ip a ls
2: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
4: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
6: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:18:8b:77:f2:01 brd ff:ff:ff:ff:ff:ff
inet 192.168.100.247/24 brd 192.168.100.255 scope global eth0
inet6 fe80::218:8bff:fe77:f201/64 scope link
valid_lft forever preferred_lft forever
8: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:18:8b:77:f2:02 brd ff:ff:ff:ff:ff:ff
inet 10.100.225.247/24 brd 10.100.225.255 scope global eth1
inet6 fe80::218:8bff:fe77:f202/64 scope link
valid_lft forever preferred_lft forever
1: venet0: <BROADCAST,POINTOPOINT,NOARP> mtu 1500 qdisc noqueue
link/void
3: veth101.0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
link/ether 00:16:3e:23:d5:dd brd ff:ff:ff:ff:ff:ff
inet6 fe80::216:3eff:fe23:d5dd/64 scope link
valid_lft forever preferred_lft forever
5: veth101.1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
link/ether 00:16:3e:7e:a5:2e brd ff:ff:ff:ff:ff:ff
inet6 fe80::216:3eff:fe7e:a52e/64 scope link
valid_lft forever preferred_lft forever
HOST: ip r ls
10.100.225.106 dev veth101.1 scope link
192.168.100.106 dev veth101.0 scope link
192.168.100.0/24 dev eth0 proto kernel scope link src 192.168.100.247
10.100.225.0/24 dev eth1 proto kernel scope link src 10.100.225.247
169.254.0.0/16 dev eth1 scope link
default via 192.168.100.1 dev eth0
VE: ip a ls
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: venet0: <BROADCAST,POINTOPOINT,NOARP> mtu 1500 qdisc noqueue
link/void
5: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
link/ether 00:16:3e:69:ce:df brd ff:ff:ff:ff:ff:ff
inet 192.168.100.106/32 scope global eth0
inet6 fe80::216:3eff:fe69:cedf/64 scope link
valid_lft forever preferred_lft forever
7: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
link/ether 00:16:3e:1d:0d:54 brd ff:ff:ff:ff:ff:ff
inet 10.100.225.106/32 scope global eth1
inet6 fe80::216:3eff:fe1d:d54/64 scope link
valid_lft forever preferred_lft forever
VE: ip r ls
192.168.100.0/24 dev eth0 scope link
10.100.225.0/24 dev eth1 scope link
default dev eth0 scope link
On 3/14/07, Andrey Mirkin <major@openvz.org> wrote:
> Hello,
>
> Please provide ip configuration (ip a ls) and route tables (ip r ls) for host
> system and VE.
>
> Regards,
> Andrey
>
> On Thursday 15 March 2007 06:16 Julian Yap wrote:
> > Kind of related to my previous posting.
> >
> > I've now setup my 2 VE interfaces using veth method.
> >
> > No longer using Source based routing, I've set up my default route to
> > be 192.168.0.1.
> >
> > Pinging on the 192.168.0.x subnet is perfect from the VE.
> >
> > Pinging on my VE's 2nd interface (eth1) works OK in burst but at times
> > just drops packets.
> >
> > Running a tcpdump, I see a log of these messages:
> > 17:10:29.813495 arp who-has machine15 tell 192.168.1.247
> >
> > When it does work OK, it's because it's returned this:
> > 17:14:35.829082 arp who-has machine15 tell 192.168.100.247
> > 17:14:36.828053 arp who-has machine13 tell machine15
> > ...
> > 17:14:36.828082 arp reply machine13 is-at 00:16:3e:7e:a5:2e
> >
> > Any clues why it arp's so much?
> >
> > - Julian
|
|
|
|
| Re: [SOLVED] 2nd interface loses packets on using veth [message #11241 is a reply to message #11233] |
Thu, 15 March 2007 23:37 |
Julian Yap
Messages: 4
Registered: March 2007
|
Junior Member |
|
|
Hi guys.
I moved back to using Venet since from the VE 'ping -I 10.100.225.106
10.100.225.1' worked for me. I figured maybe it was an ARP issue and
could be sorted out with the "Multiple Network Interfaces And ARP
Flux" wiki page instructions. No luck when I tried that.
I took another look in the forums and found my solution.
Running something like this from my VE works beautifully:
ip route add 10.100.225.0/24 dev venet0 src 10.100.225.106
Everything I've read so far suggests using Veth or Source based
routing. Both of which didn't work for me.
- Julian
On 3/15/07, Julian Yap <julianokyap@gmail.com> wrote:
> Thanks.
>
> HOST: ip a ls
>
> 2: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 4: sit0: <NOARP> mtu 1480 qdisc noop
> link/sit 0.0.0.0 brd 0.0.0.0
> 6: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
> link/ether 00:18:8b:77:f2:01 brd ff:ff:ff:ff:ff:ff
> inet 192.168.100.247/24 brd 192.168.100.255 scope global eth0
> inet6 fe80::218:8bff:fe77:f201/64 scope link
> valid_lft forever preferred_lft forever
> 8: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
> link/ether 00:18:8b:77:f2:02 brd ff:ff:ff:ff:ff:ff
> inet 10.100.225.247/24 brd 10.100.225.255 scope global eth1
> inet6 fe80::218:8bff:fe77:f202/64 scope link
> valid_lft forever preferred_lft forever
> 1: venet0: <BROADCAST,POINTOPOINT,NOARP> mtu 1500 qdisc noqueue
> link/void
> 3: veth101.0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
> link/ether 00:16:3e:23:d5:dd brd ff:ff:ff:ff:ff:ff
> inet6 fe80::216:3eff:fe23:d5dd/64 scope link
> valid_lft forever preferred_lft forever
> 5: veth101.1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
> link/ether 00:16:3e:7e:a5:2e brd ff:ff:ff:ff:ff:ff
> inet6 fe80::216:3eff:fe7e:a52e/64 scope link
> valid_lft forever preferred_lft forever
>
> HOST: ip r ls
>
> 10.100.225.106 dev veth101.1 scope link
> 192.168.100.106 dev veth101.0 scope link
> 192.168.100.0/24 dev eth0 proto kernel scope link src 192.168.100.247
> 10.100.225.0/24 dev eth1 proto kernel scope link src 10.100.225.247
> 169.254.0.0/16 dev eth1 scope link
> default via 192.168.100.1 dev eth0
>
> VE: ip a ls
>
> 1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> inet6 ::1/128 scope host
> valid_lft forever preferred_lft forever
> 3: venet0: <BROADCAST,POINTOPOINT,NOARP> mtu 1500 qdisc noqueue
> link/void
> 5: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
> link/ether 00:16:3e:69:ce:df brd ff:ff:ff:ff:ff:ff
> inet 192.168.100.106/32 scope global eth0
> inet6 fe80::216:3eff:fe69:cedf/64 scope link
> valid_lft forever preferred_lft forever
> 7: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue
> link/ether 00:16:3e:1d:0d:54 brd ff:ff:ff:ff:ff:ff
> inet 10.100.225.106/32 scope global eth1
> inet6 fe80::216:3eff:fe1d:d54/64 scope link
> valid_lft forever preferred_lft forever
>
> VE: ip r ls
>
> 192.168.100.0/24 dev eth0 scope link
> 10.100.225.0/24 dev eth1 scope link
> default dev eth0 scope link
>
> On 3/14/07, Andrey Mirkin <major@openvz.org> wrote:
> > Hello,
> >
> > Please provide ip configuration (ip a ls) and route tables (ip r ls) for host
> > system and VE.
> >
> > Regards,
> > Andrey
> >
> > On Thursday 15 March 2007 06:16 Julian Yap wrote:
> > > Kind of related to my previous posting.
> > >
> > > I've now setup my 2 VE interfaces using veth method.
> > >
> > > No longer using Source based routing, I've set up my default route to
> > > be 192.168.0.1.
> > >
> > > Pinging on the 192.168.0.x subnet is perfect from the VE.
> > >
> > > Pinging on my VE's 2nd interface (eth1) works OK in burst but at times
> > > just drops packets.
> > >
> > > Running a tcpdump, I see a log of these messages:
> > > 17:10:29.813495 arp who-has machine15 tell 192.168.1.247
> > >
> > > When it does work OK, it's because it's returned this:
> > > 17:14:35.829082 arp who-has machine15 tell 192.168.100.247
> > > 17:14:36.828053 arp who-has machine13 tell machine15
> > > ...
> > > 17:14:36.828082 arp reply machine13 is-at 00:16:3e:7e:a5:2e
> > >
> > > Any clues why it arp's so much?
> > >
> > > - Julian
|
|
|
|
Goto Forum:
Current Time: Fri Oct 31 15:24:07 GMT 2025
Total time taken to generate the page: 0.18099 seconds
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
