OpenVZ Forum


Home » General » Support » System halts with "No block devices found"
System halts with "No block devices found" [message #11201] Thu, 15 March 2007 10:39 Go to next message
zenny
Messages: 48
Registered: November 2006
Member
I installed sidux (because the etch didn't recognize the SATA HDD) and then upgraded to the etch after changing the sources.list. Then I installed the openvz. But now when I try to boot to the ovz kernel then it halts at this stage (very beginning):

Loading, please wait.
ACPI: Getting cpuindex for acpiid 0x2
ACPI: Getting cpuindex for acpiid 0x3
no block devices found

Thereafter I tried to boot with the kernel parameters noapic nolapic acpi=off and it gave the problems pointing to the fan and thermel.mo and halts with the same last line i.e. no block devices found.

Could anyone help me where did I do wrong? I followed the tutorial for etch and installed precompiled kernel for the official repository.

--

Updates:

I have tried with noapic nolapic acpi=off apm=off, but still it halts at the same point as above.

[Updated on: Thu, 15 March 2007 11:11]

Report message to a moderator

Re: System halts with "No block devices found" [message #11212 is a reply to message #11201] Thu, 15 March 2007 12:30 Go to previous messageGo to next message
Vasily Tarasov is currently offline  Vasily Tarasov
Messages: 1345
Registered: January 2006
Senior Member
Can you, please, boot sidux and perform `lspci` and `lspci -n` commands there. Then post the output of these commands here. Also, I'd like to know precise OpenVZ kernel version you're using.

Thank you,
Vasily.

Report message to a moderator

Re: System halts with "No block devices found" [message #11213 is a reply to message #11212] Thu, 15 March 2007 12:45 Go to previous messageGo to next message
zenny
Messages: 48
Registered: November 2006
Member
Sending the information as you asked for:

$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. [K8T890 North / VT8237 South] PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:0f.0 IDE interface: VIA Technologies, Inc. Unknown device 5337 (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
02:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GS] (rev a1)
04:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)
05:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0)





$ lspci -n
00:00.0 0600: 1106:0327
00:00.1 0600: 1106:1327
00:00.2 0600: 1106:2327
00:00.3 0600: 1106:3327
00:00.4 0600: 1106:4327
00:00.5 0800: 1106:5327
00:00.6 0600: 1106:6327
00:00.7 0600: 1106:7327
00:01.0 0604: 1106:b999
00:02.0 0604: 1106:a327
00:03.0 0604: 1106:c327
00:0f.0 0101: 1106:5337 (rev 80)
00:0f.1 0101: 1106:0571 (rev 07)
00:10.0 0c03: 1106:3038 (rev a0)
00:10.1 0c03: 1106:3038 (rev a0)
00:10.2 0c03: 1106:3038 (rev a0)
00:10.3 0c03: 1106:3038 (rev a0)
00:10.4 0c03: 1106:3104 (rev 86)
00:11.0 0601: 1106:3337
00:11.7 0600: 1106:287e
00:12.0 0200: 1106:3065 (rev 7c)
00:13.0 0604: 1106:337b
00:13.1 0604: 1106:337a
02:00.0 0300: 10de:0392 (rev a1)
04:01.0 0403: 1106:3288 (rev 10)
05:06.0 0c00: 1106:3044 (rev c0)





THE LINUX IMAGE INSTALLED FROM:
linux-image-2.6.18-openvz-686_028.18-2.6.18-11-1_i386.deb



cat /proc/cpuinfo output:
$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
stepping : 6
cpu MHz : 2128.078
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4258.81
clflush size : 64

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz
stepping : 6
cpu MHz : 2128.078
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4256.30
clflush size : 64

Report message to a moderator

Re: System halts with "No block devices found" [message #11219 is a reply to message #11213] Thu, 15 March 2007 14:27 Go to previous messageGo to next message
Vasily Tarasov is currently offline  Vasily Tarasov
Messages: 1345
Registered: January 2006
Senior Member
I see, that the support of your device (some VIA SATA Controller) appeared only in 2.6.20 vanilla kernel. So 2.6.18 OpenVZ kernel doesn't support it. Note that your device is not supported even by RHEL5, that was released a day ago...
Soon we're a going to release 2.6.20 based OpenVZ kernel. It should solve your problem.
One more way: you can compile driver for your kernel manually.

Vasily

Report message to a moderator

Re: System halts with "No block devices found" [message #11221 is a reply to message #11201] Thu, 15 March 2007 15:10 Go to previous messageGo to next message
zenny
Messages: 48
Registered: November 2006
Member
Thanks for the info. Could you give me some pointers how to go about it? Any relevant links will be appreciated.

Report message to a moderator

Re: System halts with "No block devices found" [message #11222 is a reply to message #11221] Thu, 15 March 2007 15:25 Go to previous message
Vasily Tarasov is currently offline  Vasily Tarasov
Messages: 1345
Registered: January 2006
Senior Member
The only link, that takes into my head: google.com Smile

Vasily.

Report message to a moderator

Previous Topic: kernel 2.6.18 028stab021.1 on RHEL4?
Next Topic: Ethernet device eth0 not found!!
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sun Nov 17 02:08:56 GMT 2024

Total time taken to generate the page: 0.03019 seconds
Powered by FUDforum Powered by Virtuozzo Containers