Home » Mailing lists » Users » Re: OpenVZ and Gentoo (partly solved)
| Re: OpenVZ and Gentoo (partly solved) [message #674] |
Thu, 05 January 2006 16:15  |
dev
Messages: 1693
Registered: September 2005
Location: Moscow
|
Senior Member |
|
|
found it!
you need to start VPS and then do bind mount, since vzctl redo mounts on
VPS start, so my 1st proposal for you was wrong. sorry :)
the best way you can do it actually is to insert your special mounts in
VPS mount script which will be automatically run on VPS start.
Please note, on 2.6.8 kernel bind mount is still rw :(
Kirill
> Am Donnerstag, 5. Januar 2006 16:27 schrieb Kirill Korotaev:
>
>>can you give me an access? it will be much faster...
>>if so, send me a private mail with login please.
>
>
> Sorry, thats not possible ...
>
>
>>Kirill
>>
>>
>>>Am Donnerstag, 5. Januar 2006 15:25 schrieb Kirill Korotaev:
>>>
>>>>>The network issue is partly solved: I do not use the gentoo net.lo
>>>>>script for net.venet0 anymore, instead I setup the interfaces venet0
>>>>>and venet0:0 with the attached workaround-script.
>>>>>
>>>>>But, how do I bind-mount directories from to host to the VPS, e.g. to
>>>>>use /usr/portage in the VPD too. If I try to (on host)
>>>>>
>>>>>gs ~ # mount /usr/portage /vz/private/2001/usr/portage/ -o bind,ro
>>>>
>>>>try /vz/root/2001/usr/portage after VPS is mounted.
>>>
>>>does not solve the problem.
>>>
>>>on host:
>>>
>>>gs ~ # vzctl mount 2001
>>>VPS is mounted
>>>gs ~ # mount /usr/portage /vz/root/2001/usr/portage -o bind,ro
>>>gs ~ # mount
>>>/dev/hda1 on / type ext3 (rw,noatime)
>>>proc on /proc type proc (rw)
>>>sysfs on /sys type sysfs (rw)
>>>udev on /dev type tmpfs (rw,nosuid)
>>>devpts on /dev/pts type devpts (rw)
>>>/dev/hdb1 on /tftproot type ext3 (rw,noatime)
>>>shm on /dev/shm type tmpfs (rw,noexec,nosuid,nodev)
>>>192.168.39.1:/home/lmeier on /root/lmeier type nfs (rw,addr=192.168.39.1)
>>>none on proc type proc (rw)
>>>/usr/portage on /vz/root/2001/usr/portage type none (ro,bind)
>>>gs ~ #
>>>
>>>in the VPS:
>>>
>>>ovz01 usr # ls
>>>bin include libexec portage sbin src
>>>i386-pc-linux-gnu lib local portage.vps share tmp
>>>ovz01 usr # ls -l portage
>>>total 0
>>>ovz01 usr #
>>>
>>>
>>>>>I get
>>>>>
>>>>>ovz01 usr # ls
>>>>>bin i386-pc-linux-gnu include lib libexec local portage sbin
>>>>>share src tmp
>>>>>ovz01 usr # ls portage
>>>>>ovz01 usr #
>>>>>
>>>>>on the VPS ovz01. Whats wrong?
>>>>>
>>>>>- Wilhelm
>>>>>
>>>>>Am Mittwoch, 4. Januar 2006 17:28 schrieb Wilhelm Meier:
>>>>>
>>>>>>Am Mittwoch, 4. Januar 2006 09:51 schrieb Kirill Korotaev:
>>>>>>
>>>>>>>so you run Gentoo inside VPS yeah?
>>>>>>
>>>>>>Well, I try to ...
>>>>>>
>>>>>>
>>>>>>>the problem seems to be in your initscripts, which didn't mount /proc
>>>>>>>on VPS start and didn't create /dev/ptyX entries for terminal
>>>>>>>devices. Looks like the only process in your VPS is init, strange...
>>>>>>
>>>>>>I created the needed /dev/ttyp0 and /dev/ttyp0 by hand
>>>>>>in /vz/private/<id>/dev/ and mount also /proc by hand. Then it is
>>>>>>possible to enter the gentoo-VPS:
>>>>>>
>>>>>>gs ~ # vzctl enter 2001
>>>>>>entered into VPS 2001
>>>>>>ovz01 / # ps aux
>>>>>>USER PID %CPU %MEM VSZ RSS TTY STAT START TIME
>>>>>>COMMAND root 1 0.0 0.1 1368 480 ? Ss 17:06
>>>>>>0:00 ini root 14644 0.0 0.3 1740 780 ? Ss 17:14
>>>>>>0:00 vzctl: ttyp0 root 15669 0.5 0.5 2244 1288 ttyp0 Ss
>>>>>>17:14 0:00 bash -i root 15671 0.0 0.3 2376 836 ttyp0 R+
>>>>>> 17:14 0:00 ps aux ovz01 / #
>>>>>>
>>>>>>I also copied /etc/init.d/net.lo to the VPS and some additional
>>>>>>scripts, which are apparently missing.
>>>>>>But in the gentoo-VPS I get still:
>>>>>>
>>>>>>ovz01 / # /etc/init.d/net.venet0 start
>>>>>>* Starting
>>>>>>* no interface module has been loaded
>>>>>>ovz01 / #
>>>>>>ovz01 / # /sbin/ifconfig -a
>>>>>>lo Link encap:Local Loopback
>>>>>> LOOPBACK MTU:16436 Metric:1
>>>>>> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:2660 (2.5 Kb) TX bytes:2660 (2.5 Kb)
>>>>>>
>>>>>>venet0 Link encap:UNSPEC HWaddr
>>>>>>00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>>>>>> BROADCAST POINTOPOINT NOARP MTU:1500 Metric:1
>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>>>>>>
>>>>>>ovz01 / #
>>>>>>
>>>>>>If I try that with a debian-guest on the gentoo-host, I get:
>>>>>>
>>>>>>gs ~ # vzctl enter 2002
>>>>>>entered into VPS 2002
>>>>>>root@ovz02:/# ifconfig -a
>>>>>>lo Link encap:Local Loopback
>>>>>> LOOPBACK MTU:16436 Metric:1
>>>>>> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:2660 (2.5 KiB) TX bytes:2660 (2.5 KiB)
>>>>>>
>>>>>>venet0 Link encap:UNSPEC HWaddr
>>>>>>00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>>>>>> inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0
>>>>>>Mask:255.255.255.255
>>>>>> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
>>>>>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
>>>>>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
>>>>>> collisions:0 txqueuelen:0
>>>>>> RX bytes:252 (252.0 b) TX bytes:252 (252.0 b)
>>>>>>
>>>>>>venet0:0 Link encap:UNSPEC HWaddr
>>>>>>00-00-FF-FF-FF-FF-00-00-00-00-00-00-00-00-00-00
>>>>>> inet addr:192.168.39.22 P-t-P:192.168.39.22 Bcast:0.0.0.0
>>>>>>Mask:255.255.255.255
>>>>>> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
>>>>>>
>>>>>>root@ovz02:/#
>>>>>>
>>>>>>So the interface venet0:0 is missing in the gentoo-guest.
>>>>>>
>>>>>>
>>>>>>>kir@ who is in charge of Gentoo will be available after Jan 7 only,
>>>>>>>but I can check what's wrong with your VPS if you provide me the
>>>>>>>credentials in private email.
>>>>>>>
>>>>>>>Kirill
>>>>>>>
>>>>>>>
>>>>>>>>Hi,
>>>>>>>>
>>>>>>>>I want to use OpenVZ with Gentoo. I did the install of OpenVZ as
>>>>>>>>described in
>>>>>>>>
>>>>>>>>http://dev.croup.de/proj/gentoo-vps/wiki
>>>>>>>>
>>>>>>>>When I try to enter, I get:
>>>>>>>>
>>>>>>>>gs ~ # vzctl start 2001
>>>>>>>>Starting VPS ...
>>>>>>>>VPS is mounted
>>>>>>>>Setting CPU units: 1000
>>>>>>>>VPS start in progress...
>>>>>>>>gs ~ # vzctl status 2001
>>>>>>>>VPSID 2001 exist mounted running
>>>>>>>>gs ~ # vzctl enter 2001
>>>>>>>>Unable to open pty: No such file or directory
>>>>>>>>enter failed
>>>>>>>>gs ~ #
>>>>>>>>
>>>>>>>>and
>>>>>>>>
>>>>>>>>gs ~ # vzctl exec 2001 ps aux
>>>>>>>>Error, do this: mount -t proc proc /proc
>>>>>>>>gs ~ # vzctl exec 2001 mount -t proc none /proc
>>>>>>>>gs ~ # vzctl exec 2001 ps aux
>>>>>>>>USER PID %CPU %MEM VSZ RSS TTY STAT START TIME
>>>>>>>>COMM
...
|
|
|
|
| Re: OpenVZ and Gentoo (partly solved) [message #675 is a reply to message #674] |
Thu, 05 January 2006 16:25  |
wimalopaan
Messages: 15
Registered: January 2006
|
Junior Member |
|
|
Am Donnerstag, 5. Januar 2006 17:15 schrieb Kirill Korotaev:
> found it!
> you need to start VPS and then do bind mount, since vzctl redo mounts on
> VPS start, so my 1st proposal for you was wrong. sorry :)
no problem. It tried it already, and now I get "permissin denied" if I try to
access the directory from inside the VPS.
> the best way you can do it actually is to insert your special mounts in
> VPS mount script which will be automatically run on VPS start.
This must be done on the host. Is there a possibility to execute scripts by
vzctl start?
> Please note, on 2.6.8 kernel bind mount is still rw :(
o.k.
>
> Kirill
>
> > Am Donnerstag, 5. Januar 2006 16:27 schrieb Kirill Korotaev:
> >>can you give me an access? it will be much faster...
> >>if so, send me a private mail with login please.
> >
> > Sorry, thats not possible ...
> >
> >>Kirill
> >>
> >>>Am Donnerstag, 5. Januar 2006 15:25 schrieb Kirill Korotaev:
> >>>>>The network issue is partly solved: I do not use the gentoo net.lo
> >>>>>script for net.venet0 anymore, instead I setup the interfaces venet0
> >>>>>and venet0:0 with the attached workaround-script.
> >>>>>
> >>>>>But, how do I bind-mount directories from to host to the VPS, e.g. to
> >>>>>use /usr/portage in the VPD too. If I try to (on host)
> >>>>>
> >>>>>gs ~ # mount /usr/portage /vz/private/2001/usr/portage/ -o bind,ro
> >>>>
> >>>>try /vz/root/2001/usr/portage after VPS is mounted.
> >>>
> >>>does not solve the problem.
> >>>
> >>>on host:
> >>>
> >>>gs ~ # vzctl mount 2001
> >>>VPS is mounted
> >>>gs ~ # mount /usr/portage /vz/root/2001/usr/portage -o bind,ro
> >>>gs ~ # mount
> >>>/dev/hda1 on / type ext3 (rw,noatime)
> >>>proc on /proc type proc (rw)
> >>>sysfs on /sys type sysfs (rw)
> >>>udev on /dev type tmpfs (rw,nosuid)
> >>>devpts on /dev/pts type devpts (rw)
> >>>/dev/hdb1 on /tftproot type ext3 (rw,noatime)
> >>>shm on /dev/shm type tmpfs (rw,noexec,nosuid,nodev)
> >>>192.168.39.1:/home/lmeier on /root/lmeier type nfs
> >>> (rw,addr=192.168.39.1) none on proc type proc (rw)
> >>>/usr/portage on /vz/root/2001/usr/portage type none (ro,bind)
> >>>gs ~ #
> >>>
> >>>in the VPS:
> >>>
> >>>ovz01 usr # ls
> >>>bin include libexec portage sbin src
> >>>i386-pc-linux-gnu lib local portage.vps share tmp
> >>>ovz01 usr # ls -l portage
> >>>total 0
> >>>ovz01 usr #
> >>>
> >>>>>I get
> >>>>>
> >>>>>ovz01 usr # ls
> >>>>>bin i386-pc-linux-gnu include lib libexec local portage sbin
> >>>>>share src tmp
> >>>>>ovz01 usr # ls portage
> >>>>>ovz01 usr #
> >>>>>
> >>>>>on the VPS ovz01. Whats wrong?
> >>>>>
> >>>>>- Wilhelm
> >>>>>
> >>>>>Am Mittwoch, 4. Januar 2006 17:28 schrieb Wilhelm Meier:
> >>>>>>Am Mittwoch, 4. Januar 2006 09:51 schrieb Kirill Korotaev:
> >>>>>>>so you run Gentoo inside VPS yeah?
> >>>>>>
> >>>>>>Well, I try to ...
> >>>>>>
> >>>>>>>the problem seems to be in your initscripts, which didn't mount
> >>>>>>> /proc on VPS start and didn't create /dev/ptyX entries for terminal
> >>>>>>> devices. Looks like the only process in your VPS is init,
> >>>>>>> strange...
> >>>>>>
> >>>>>>I created the needed /dev/ttyp0 and /dev/ttyp0 by hand
> >>>>>>in /vz/private/<id>/dev/ and mount also /proc by hand. Then it is
> >>>>>>possible to enter the gentoo-VPS:
> >>>>>>
> >>>>>>gs ~ # vzctl enter 2001
> >>>>>>entered into VPS 2001
> >>>>>>ovz01 / # ps aux
> >>>>>>USER PID %CPU %MEM VSZ RSS TTY STAT START TIME
> >>>>>>COMMAND root 1 0.0 0.1 1368 480 ? Ss 17:06
> >>>>>>0:00 ini root 14644 0.0 0.3 1740 780 ? Ss 17:14
> >>>>>>0:00 vzctl: ttyp0 root 15669 0.5 0.5 2244 1288 ttyp0 Ss
> >>>>>>17:14 0:00 bash -i root 15671 0.0 0.3 2376 836 ttyp0
> >>>>>> R+ 17:14 0:00 ps aux ovz01 / #
> >>>>>>
> >>>>>>I also copied /etc/init.d/net.lo to the VPS and some additional
> >>>>>>scripts, which are apparently missing.
> >>>>>>But in the gentoo-VPS I get still:
> >>>>>>
> >>>>>>ovz01 / # /etc/init.d/net.venet0 start
> >>>>>>* Starting
> >>>>>>* no interface module has been loaded
> >>>>>>ovz01 / #
> >>>>>>ovz01 / # /sbin/ifconfig -a
> >>>>>>lo Link encap:Local Loopback
> >>>>>> LOOPBACK MTU:16436 Metric:1
> >>>>>> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
> >>>>>> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
> >>>>>> collisions:0 txqueuelen:0
> >>>>>> RX bytes:2660 (2.5 Kb) TX bytes:2660 (2.5 Kb)
> >>>>>>
> >>>>>>venet0 Link encap:UNSPEC HWaddr
> >>>>>>00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> >>>>>> BROADCAST POINTOPOINT NOARP MTU:1500 Metric:1
> >>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >>>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> >>>>>> collisions:0 txqueuelen:0
> >>>>>> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> >>>>>>
> >>>>>>ovz01 / #
> >>>>>>
> >>>>>>If I try that with a debian-guest on the gentoo-host, I get:
> >>>>>>
> >>>>>>gs ~ # vzctl enter 2002
> >>>>>>entered into VPS 2002
> >>>>>>root@ovz02:/# ifconfig -a
> >>>>>>lo Link encap:Local Loopback
> >>>>>> LOOPBACK MTU:16436 Metric:1
> >>>>>> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
> >>>>>> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
> >>>>>> collisions:0 txqueuelen:0
> >>>>>> RX bytes:2660 (2.5 KiB) TX bytes:2660 (2.5 KiB)
> >>>>>>
> >>>>>>venet0 Link encap:UNSPEC HWaddr
> >>>>>>00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> >>>>>> inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0
> >>>>>>Mask:255.255.255.255
> >>>>>> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
> >>>>>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
> >>>>>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
> >>>>>> collisions:0 txqueuelen:0
> >>>>>> RX bytes:252 (252.0 b) TX bytes:252 (252.0 b)
> >>>>>>
> >>>>>>venet0:0 Link encap:UNSPEC HWaddr
> >>>>>>00-00-FF-FF-FF-FF-00-00-00-00-00-00-00-00-00-00
> >>>>>> inet addr:192.168.39.22 P-t-P:192.168.39.22 Bcast:0.0.0.0
> >>>>>>Mask:255.255.255.255
> >>>>>> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
> >>>>>>
> >>>>>>root@ovz02:/#
> >>>>>>
> >>>>>>So the interface venet0:0 is missing in the gentoo-guest.
> >>>>>>
> >>>>>>>kir@ who is in charge of Gentoo will be available after Jan 7 only,
> >>>>>>>but I can check what's wrong with your VPS if you provide me the
> >>>>>>>credentials in private email.
> >>>>>>>
> >>>>>>>Kirill
> >>>>>>>
> >>>>>>>>Hi,
> >>>>>>>>
> >>>>>>>>I want to use OpenVZ with Gentoo. I did the install of OpenVZ as
> >>>>>>>>described in
> >>>>>>>>
> >>>>>>>>http://dev.croup.de/proj/gentoo-vps/wiki
> >>>>>>>>
> >>>>>>>>When I try to enter, I get:
> >>>>>>>>
> >>>>>>>>gs ~ # vzctl start 2001
> >>>>>>>>Starting VPS ...
> >>>>>>>>VPS is mounted
> >>>>>>>>Setting CPU units: 1000
> >>>>>>>>VPS start in progress...
> >>>>>>>>gs ~ # vzctl status 2001
> >>>>>>>>VPSID 2001 exist mounted running
> >>>>>>>>gs ~ # vzctl enter 2001
> >>>>>>>>Unable to open pty: No such file or directory
> >>>>>>>>enter failed
> >>>>>>>>gs ~ #
> >>>>>>>>
> >>>>>>>>and
> >>>>>>>>
> >>>>>>>>gs ~ # vzctl exec 2001 ps aux
> >>>>>>>>Error, do this: mount -t proc proc /proc
> >>>>>>>>gs ~ # vzctl exec 2001 mount -t proc none /proc
> >>>>>>>>gs ~ # vzctl exec 2001 ps aux
> >>>>>>>>USER PID %CPU %MEM VSZ RSS TTY STAT START TIME
> >>>>>>>>COMMAND root 1 0.0 0.1 1368 480 ? Ss 00:30
> >>>>>>>>0:00 ini root 22894 0.0 0.3 2372 832 ? Rs 00:31
> >>>>>>>>0:00 ps aux gs ~ #
> >>>>>>>>
> >>>>>>>>Any hints?
> >>>>>>>>--
> >>>>>>>>Wilhelm Meier
> >>>>>>>>email: meier@informatik.fh-kl.de
--
--
Wilhelm Meier
email: meier@informatik.fh-kl.de
|
|
|
|
| Re: OpenVZ and Gentoo (partly solved) [message #676 is a reply to message #675] |
Thu, 05 January 2006 16:31 |
dev
Messages: 1693
Registered: September 2005
Location: Moscow
|
Senior Member |
|
|
>>found it!
>>you need to start VPS and then do bind mount, since vzctl redo mounts on
>>VPS start, so my 1st proposal for you was wrong. sorry :)
>
>
> no problem. It tried it already, and now I get "permissin denied" if I try to
> access the directory from inside the VPS.
huh... what file permisions do you have in /usr/portage?
please, note, that UIDs can be different in VPS and host system.
Also please check cat /proc/sys/fs/ve-area-access-check
if it is non-zero value, then echo 0 to it.
This check makes sure that your VPS has no access to trusted data or
host system don't access to untrusted one. Just disable it as we did in
recent kernel by default.
>>the best way you can do it actually is to insert your special mounts in
>>VPS mount script which will be automatically run on VPS start.
>
>
> This must be done on the host. Is there a possibility to execute scripts by
> vzctl start?
yes. see scripts in /etc/sysconfig/vz-scripts
>>Please note, on 2.6.8 kernel bind mount is still rw :(
>
>
> o.k.
>
>
>>Kirill
>>
>>
>>>Am Donnerstag, 5. Januar 2006 16:27 schrieb Kirill Korotaev:
>>>
>>>>can you give me an access? it will be much faster...
>>>>if so, send me a private mail with login please.
>>>
>>>Sorry, thats not possible ...
>>>
>>>
>>>>Kirill
>>>>
>>>>
>>>>>Am Donnerstag, 5. Januar 2006 15:25 schrieb Kirill Korotaev:
>>>>>
>>>>>>>The network issue is partly solved: I do not use the gentoo net.lo
>>>>>>>script for net.venet0 anymore, instead I setup the interfaces venet0
>>>>>>>and venet0:0 with the attached workaround-script.
>>>>>>>
>>>>>>>But, how do I bind-mount directories from to host to the VPS, e.g. to
>>>>>>>use /usr/portage in the VPD too. If I try to (on host)
>>>>>>>
>>>>>>>gs ~ # mount /usr/portage /vz/private/2001/usr/portage/ -o bind,ro
>>>>>>
>>>>>>try /vz/root/2001/usr/portage after VPS is mounted.
>>>>>
>>>>>does not solve the problem.
>>>>>
>>>>>on host:
>>>>>
>>>>>gs ~ # vzctl mount 2001
>>>>>VPS is mounted
>>>>>gs ~ # mount /usr/portage /vz/root/2001/usr/portage -o bind,ro
>>>>>gs ~ # mount
>>>>>/dev/hda1 on / type ext3 (rw,noatime)
>>>>>proc on /proc type proc (rw)
>>>>>sysfs on /sys type sysfs (rw)
>>>>>udev on /dev type tmpfs (rw,nosuid)
>>>>>devpts on /dev/pts type devpts (rw)
>>>>>/dev/hdb1 on /tftproot type ext3 (rw,noatime)
>>>>>shm on /dev/shm type tmpfs (rw,noexec,nosuid,nodev)
>>>>>192.168.39.1:/home/lmeier on /root/lmeier type nfs
>>>>>(rw,addr=192.168.39.1) none on proc type proc (rw)
>>>>>/usr/portage on /vz/root/2001/usr/portage type none (ro,bind)
>>>>>gs ~ #
>>>>>
>>>>>in the VPS:
>>>>>
>>>>>ovz01 usr # ls
>>>>>bin include libexec portage sbin src
>>>>>i386-pc-linux-gnu lib local portage.vps share tmp
>>>>>ovz01 usr # ls -l portage
>>>>>total 0
>>>>>ovz01 usr #
>>>>>
>>>>>
>>>>>>>I get
>>>>>>>
>>>>>>>ovz01 usr # ls
>>>>>>>bin i386-pc-linux-gnu include lib libexec local portage sbin
>>>>>>>share src tmp
>>>>>>>ovz01 usr # ls portage
>>>>>>>ovz01 usr #
>>>>>>>
>>>>>>>on the VPS ovz01. Whats wrong?
>>>>>>>
>>>>>>>- Wilhelm
>>>>>>>
>>>>>>>Am Mittwoch, 4. Januar 2006 17:28 schrieb Wilhelm Meier:
>>>>>>>
>>>>>>>>Am Mittwoch, 4. Januar 2006 09:51 schrieb Kirill Korotaev:
>>>>>>>>
>>>>>>>>>so you run Gentoo inside VPS yeah?
>>>>>>>>
>>>>>>>>Well, I try to ...
>>>>>>>>
>>>>>>>>
>>>>>>>>>the problem seems to be in your initscripts, which didn't mount
>>>>>>>>>/proc on VPS start and didn't create /dev/ptyX entries for terminal
>>>>>>>>>devices. Looks like the only process in your VPS is init,
>>>>>>>>>strange...
>>>>>>>>
>>>>>>>>I created the needed /dev/ttyp0 and /dev/ttyp0 by hand
>>>>>>>>in /vz/private/<id>/dev/ and mount also /proc by hand. Then it is
>>>>>>>>possible to enter the gentoo-VPS:
>>>>>>>>
>>>>>>>>gs ~ # vzctl enter 2001
>>>>>>>>entered into VPS 2001
>>>>>>>>ovz01 / # ps aux
>>>>>>>>USER PID %CPU %MEM VSZ RSS TTY STAT START TIME
>>>>>>>>COMMAND root 1 0.0 0.1 1368 480 ? Ss 17:06
>>>>>>>>0:00 ini root 14644 0.0 0.3 1740 780 ? Ss 17:14
>>>>>>>>0:00 vzctl: ttyp0 root 15669 0.5 0.5 2244 1288 ttyp0 Ss
>>>>>>>>17:14 0:00 bash -i root 15671 0.0 0.3 2376 836 ttyp0
>>>>>>>>R+ 17:14 0:00 ps aux ovz01 / #
>>>>>>>>
>>>>>>>>I also copied /etc/init.d/net.lo to the VPS and some additional
>>>>>>>>scripts, which are apparently missing.
>>>>>>>>But in the gentoo-VPS I get still:
>>>>>>>>
>>>>>>>>ovz01 / # /etc/init.d/net.venet0 start
>>>>>>>>* Starting
>>>>>>>>* no interface module has been loaded
>>>>>>>>ovz01 / #
>>>>>>>>ovz01 / # /sbin/ifconfig -a
>>>>>>>>lo Link encap:Local Loopback
>>>>>>>> LOOPBACK MTU:16436 Metric:1
>>>>>>>> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
>>>>>>>> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
>>>>>>>> collisions:0 txqueuelen:0
>>>>>>>> RX bytes:2660 (2.5 Kb) TX bytes:2660 (2.5 Kb)
>>>>>>>>
>>>>>>>>venet0 Link encap:UNSPEC HWaddr
>>>>>>>>00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>>>>>>>> BROADCAST POINTOPOINT NOARP MTU:1500 Metric:1
>>>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>>>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>>>>>> collisions:0 txqueuelen:0
>>>>>>>> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>>>>>>>>
>>>>>>>>ovz01 / #
>>>>>>>>
>>>>>>>>If I try that with a debian-guest on the gentoo-host, I get:
>>>>>>>>
>>>>>>>>gs ~ # vzctl enter 2002
>>>>>>>>entered into VPS 2002
>>>>>>>>root@ovz02:/# ifconfig -a
>>>>>>>>lo Link encap:Local Loopback
>>>>>>>> LOOPBACK MTU:16436 Metric:1
>>>>>>>> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
>>>>>>>> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
>>>>>>>> collisions:0 txqueuelen:0
>>>>>>>> RX bytes:2660 (2.5 KiB) TX bytes:2660 (2.5 KiB)
>>>>>>>>
>>>>>>>>venet0 Link encap:UNSPEC HWaddr
>>>>>>>>00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>>>>>>>> inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0
>>>>>>>>Mask:255.255.255.255
>>>>>>>> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
>>>>>>>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
>>>>>>>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
>>>>>>>> collisions:0 txqueuelen:0
>>>>>>>> RX bytes:252 (252.0 b) TX bytes:252 (252.0 b)
>>>>>>>>
>>>>>>>>venet0:0 Link encap:UNSPEC HWaddr
>>>>>>>>00-00-FF-FF-FF-FF-00-00-00-00-00-00-00-00-00-00
>>>>>>>> inet addr:192.168.39.22 P-t-P:192.168.39.22 Bcast:0.0.0.0
>>>>>>>>Mask:255.255.255.255
>>>>>>>> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
>>>>>>>>
>>>>>>>>root@ovz02:/#
>>>>>>>>
>>>>>>>>So the interface venet0:0 is missing
...
|
|
|
|
| Re: OpenVZ and Gentoo (partly solved) [message #677 is a reply to message #676] |
Thu, 05 January 2006 17:08 |
wimalopaan
Messages: 15
Registered: January 2006
|
Junior Member |
|
|
Am Donnerstag, 5. Januar 2006 17:31 schrieb Kirill Korotaev:
> >>found it!
> >>you need to start VPS and then do bind mount, since vzctl redo mounts on
> >>VPS start, so my 1st proposal for you was wrong. sorry :)
> >
> > no problem. It tried it already, and now I get "permissin denied" if I
> > try to access the directory from inside the VPS.
>
> huh... what file permisions do you have in /usr/portage?
> please, note, that UIDs can be different in VPS and host system.
> Also please check cat /proc/sys/fs/ve-area-access-check
> if it is non-zero value, then echo 0 to it.
o.k., that's it !!! thanks
> This check makes sure that your VPS has no access to trusted data or
> host system don't access to untrusted one. Just disable it as we did in
> recent kernel by default.
>
> >>the best way you can do it actually is to insert your special mounts in
> >>VPS mount script which will be automatically run on VPS start.
> >
> > This must be done on the host. Is there a possibility to execute scripts
> > by vzctl start?
>
> yes. see scripts in /etc/sysconfig/vz-scripts
I placed the two scripts (see below), but they aren't executed :-( The scripts
should mount/umount the bind-mounts.
gs scripts # ls -l /usr/lib/vzctl/scripts/
total 32
-rwxr-xr-x 1 root root 69 Jan 5 19:38 2001.mount
-rwxr-xr-x 1 root root 47 Jan 5 19:39 2001.umount
-rwxr-xr-x 1 root root 1522 Jan 4 01:05 vps-create
-rwxr-xr-x 1 root root 4037 Jan 4 01:05 vps-functions
-rwxr-xr-x 1 root root 1354 Jan 4 01:05 vps-net_add
-rwxr-xr-x 1 root root 1127 Jan 4 01:05 vps-net_del
-rwxr-xr-x 1 root root 2308 Jan 4 01:05 vps-postcreate
-rwxr-xr-x 1 root root 785 Jan 4 01:05 vps-stop
gs scripts # vzctl --verbose start 2001
Unable to open /usr/lib/vzctl/modules/: No such file or directory
Starting VPS ...
Running: /usr/sbin/vzquota show 2001
Running: /usr/sbin/vzquota on 2001 -r 0 -b 1048676 -B 1153534 -i 200100 -I
220100 -e 0 -n 0 -s 0
Mounting root: /vz/root/2001 /vz/private/2001
VPS is mounted
Running: /usr/sbin/vzquota stat 2001 -f
Running: vzquota setlimit 2001 -b 1048576 -B 1153434 -i 200000 -I 220000 -e 0
-n 0
Adding IP address(es): 192.168.39.21
Running: /usr/lib/vzctl/scripts/vps-net_add
Running VPS script: /etc/vz/dists/scripts/gentoo-add_ip.sh
Setting CPU units: 1000
Set hostname: ovz01
Running VPS script: /etc/vz/dists/scripts/gentoo-set_hostname.sh
VPS start in progress...
gs scripts # mount
/dev/hda1 on / type ext3 (rw,noatime)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
udev on /dev type tmpfs (rw,nosuid)
devpts on /dev/pts type devpts (rw)
/dev/hdb1 on /tftproot type ext3 (rw,noatime)
shm on /dev/shm type tmpfs (rw,noexec,nosuid,nodev)
192.168.39.1:/home/lmeier on /root/lmeier type nfs (rw,addr=192.168.39.1)
gs scripts #
>
> >>Please note, on 2.6.8 kernel bind mount is still rw :(
> >
> > o.k.
> >
> >>Kirill
> >>
> >>>Am Donnerstag, 5. Januar 2006 16:27 schrieb Kirill Korotaev:
> >>>>can you give me an access? it will be much faster...
> >>>>if so, send me a private mail with login please.
> >>>
> >>>Sorry, thats not possible ...
> >>>
> >>>>Kirill
> >>>>
> >>>>>Am Donnerstag, 5. Januar 2006 15:25 schrieb Kirill Korotaev:
> >>>>>>>The network issue is partly solved: I do not use the gentoo net.lo
> >>>>>>>script for net.venet0 anymore, instead I setup the interfaces venet0
> >>>>>>>and venet0:0 with the attached workaround-script.
> >>>>>>>
> >>>>>>>But, how do I bind-mount directories from to host to the VPS, e.g.
> >>>>>>> to use /usr/portage in the VPD too. If I try to (on host)
> >>>>>>>
> >>>>>>>gs ~ # mount /usr/portage /vz/private/2001/usr/portage/ -o bind,ro
> >>>>>>
> >>>>>>try /vz/root/2001/usr/portage after VPS is mounted.
> >>>>>
> >>>>>does not solve the problem.
> >>>>>
> >>>>>on host:
> >>>>>
> >>>>>gs ~ # vzctl mount 2001
> >>>>>VPS is mounted
> >>>>>gs ~ # mount /usr/portage /vz/root/2001/usr/portage -o bind,ro
> >>>>>gs ~ # mount
> >>>>>/dev/hda1 on / type ext3 (rw,noatime)
> >>>>>proc on /proc type proc (rw)
> >>>>>sysfs on /sys type sysfs (rw)
> >>>>>udev on /dev type tmpfs (rw,nosuid)
> >>>>>devpts on /dev/pts type devpts (rw)
> >>>>>/dev/hdb1 on /tftproot type ext3 (rw,noatime)
> >>>>>shm on /dev/shm type tmpfs (rw,noexec,nosuid,nodev)
> >>>>>192.168.39.1:/home/lmeier on /root/lmeier type nfs
> >>>>>(rw,addr=192.168.39.1) none on proc type proc (rw)
> >>>>>/usr/portage on /vz/root/2001/usr/portage type none (ro,bind)
> >>>>>gs ~ #
> >>>>>
> >>>>>in the VPS:
> >>>>>
> >>>>>ovz01 usr # ls
> >>>>>bin include libexec portage sbin src
> >>>>>i386-pc-linux-gnu lib local portage.vps share tmp
> >>>>>ovz01 usr # ls -l portage
> >>>>>total 0
> >>>>>ovz01 usr #
> >>>>>
> >>>>>>>I get
> >>>>>>>
> >>>>>>>ovz01 usr # ls
> >>>>>>>bin i386-pc-linux-gnu include lib libexec local portage sbin
> >>>>>>>share src tmp
> >>>>>>>ovz01 usr # ls portage
> >>>>>>>ovz01 usr #
> >>>>>>>
> >>>>>>>on the VPS ovz01. Whats wrong?
> >>>>>>>
> >>>>>>>- Wilhelm
> >>>>>>>
> >>>>>>>Am Mittwoch, 4. Januar 2006 17:28 schrieb Wilhelm Meier:
> >>>>>>>>Am Mittwoch, 4. Januar 2006 09:51 schrieb Kirill Korotaev:
> >>>>>>>>>so you run Gentoo inside VPS yeah?
> >>>>>>>>
> >>>>>>>>Well, I try to ...
> >>>>>>>>
> >>>>>>>>>the problem seems to be in your initscripts, which didn't mount
> >>>>>>>>>/proc on VPS start and didn't create /dev/ptyX entries for
> >>>>>>>>> terminal devices. Looks like the only process in your VPS is
> >>>>>>>>> init, strange...
> >>>>>>>>
> >>>>>>>>I created the needed /dev/ttyp0 and /dev/ttyp0 by hand
> >>>>>>>>in /vz/private/<id>/dev/ and mount also /proc by hand. Then it is
> >>>>>>>>possible to enter the gentoo-VPS:
> >>>>>>>>
> >>>>>>>>gs ~ # vzctl enter 2001
> >>>>>>>>entered into VPS 2001
> >>>>>>>>ovz01 / # ps aux
> >>>>>>>>USER PID %CPU %MEM VSZ RSS TTY STAT START TIME
> >>>>>>>>COMMAND root 1 0.0 0.1 1368 480 ? Ss 17:06
> >>>>>>>>0:00 ini root 14644 0.0 0.3 1740 780 ? Ss 17:14
> >>>>>>>>0:00 vzctl: ttyp0 root 15669 0.5 0.5 2244 1288 ttyp0 Ss
> >>>>>>>>17:14 0:00 bash -i root 15671 0.0 0.3 2376 836 ttyp0
> >>>>>>>>R+ 17:14 0:00 ps aux ovz01 / #
> >>>>>>>>
> >>>>>>>>I also copied /etc/init.d/net.lo to the VPS and some additional
> >>>>>>>>scripts, which are apparently missing.
> >>>>>>>>But in the gentoo-VPS I get still:
> >>>>>>>>
> >>>>>>>>ovz01 / # /etc/init.d/net.venet0 start
> >>>>>>>>* Starting
> >>>>>>>>* no interface module has been loaded
> >>>>>>>>ovz01 / #
> >>>>>>>>ovz01 / # /sbin/ifconfig -a
> >>>>>>>>lo Link encap:Local Loopback
> >>>>>>>> LOOPBACK MTU:16436 Metric:1
> >>>>>>>> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
> >>>>>>>> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
> >>>>>>>> collisions:0 txqueuelen:0
> >>>>>>>> RX bytes:2660 (2.5 Kb) TX bytes:2660 (2.5 Kb)
> >>>>>>>>
> >>>>>>>>venet0 Link encap:UNSPEC HWaddr
> >>>>>>>>00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> >>>>>>>> BROADCAST POINTOPOINT NOARP MTU:1500 Metric:1
> >>>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> >>>>>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> >>>>>>>> collisions:0 txqueuelen:0
> >>>>>>>> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> >>>>>>>>
> >>>>>>>>ovz01 / #
> >>>>>>>>
> >>>>>>>>If I try that with a debian-guest on the gentoo-host, I get:
> >>>>>>>>
> >>>>>>>>gs ~ # vzctl enter 2002
> >>>>>>>>entered into VPS 2002
> >>>>>>>>root@ovz02:/# ifconfig -a
> >>>>>>>>lo Link encap:Local Loopback
> >>>>>>>> LOOPBACK MTU:16436 Metric:1
> >>>>>>>> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
> >>>>>>>> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
> >>>>>>>> collisions:0 txqueuelen:0
> >>>>>>>> RX bytes:2660 (2.5 KiB) TX bytes:2660 (2.5 KiB)
> >>>>>>>>
> >>>>>>>>venet0 Link encap:UNSPEC HWaddr
> >>>>>>>>00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> >>>>>>>> inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0
> >>>>>>>>Mask:255.255.255.255
> >>>>>>>> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
> >>>>>>>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
> >>>>>>>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
> >>>>>>>> collisions:0 txqueuelen:0
> >>>>>>>> RX bytes:252 (252.0 b) TX bytes:252 (252.0 b)
> >>>>>>>>
> >>>>>>>>venet0:0 Link encap:UNSPEC HWaddr
> >>>>>>>>00-00-FF-FF-FF-FF-00-00-00-00-00-00-00-00-00-00
> >>>>>>>> inet addr:192.168.39.22 P-t-P:192.168.39.22 Bcast:0.0.0.0
> >>>>>>>>Mask:255.255.255.255
> >>>>>>>> UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
> >>>>>>>>
> >>>>>>>>root@ovz02:/#
> >>>>>>>>
> >>>>>>>>So the interface venet0:0 is missing in the gentoo-guest.
> >>>>>>>>
> >>>>>>>>>kir@ who is in charge of Gentoo will be available after Jan 7
> >>>>>>>>> only, but I can check what's wrong with your VPS if you provide
> >>>>>>>>> me the credentials in private email.
> >>>>>>>>>
> >>>>>>>>>Kirill
> >>>>>>>>>
> >>>>>>>>>>Hi,
> >>>>>>>>>>
> >>>>>>>>>>I want to use OpenVZ with Gentoo. I did the install of OpenVZ as
> >>>>>>>>>>described in
> >>>>>>>>>>
> >>>>>>>>>>http://dev.croup.de/proj/gentoo-vps/wiki
> >>>>>>>>>>
> >>>>>>>>>>When I try to enter, I get:
> >>>>>>>>>>
> >>>>>>>>>>gs ~ # vzctl start 2001
> >>>>>>>>>>Starting VPS ...
> >>>>>>>>>>VPS is mounted
> >>>>>>>>>>Setting CPU units: 1000
> >>>>>>>>>>VPS start in progress...
> >>>>>>>>>>gs ~ # vzctl status 2001
> >>>>>>>>>>VPSID 2001 exist mounted running
> >>>>>>>>>>gs ~ # vzctl enter 2001
> >>>>>>>>>>Unable to open pty: No such file or directory
> >>>>>>>>>>enter failed
> >>>>>>>>>>gs ~ #
> >>>>>>>>>>
> >>>>>>>>>>and
> >>>>>>>>>>
> >>>>>>>>>>gs ~ # vzctl exec 2001 ps aux
> >>>>>>>>>>Error, do this: mount -t proc proc /proc
> >>>>>>>>>>gs ~ # vzctl exec 2001 mount -t proc none /proc
> >>>>>>>>>>gs ~ # vzctl exec 2001 ps aux
> >>>>>>>>>>USER PID %CPU %MEM VSZ RSS TTY STAT START TIME
> >>>>>>>>>>COMMAND root 1 0.0 0.1 1368 480 ? Ss 00:30
> >>>>>>>>>>0:00 ini root 22894 0.0 0.3 2372 832 ? Rs
> >>>>>>>>>> 00:31 0:00 ps aux gs ~ #
> >>>>>>>>>>
> >>>>>>>>>>Any hints?
> >>>>>>>>>>--
> >>>>>>>>>>Wilhelm Meier
> >>>>>>>>>>email: meier@informatik.fh-kl.de
--
--
Wilhelm Meier
email: meier@informatik.fh-kl.de
|
|
|
|
| Re: OpenVZ and Gentoo (partly solved) [message #681 is a reply to message #677] |
Fri, 06 January 2006 17:58 |
dev
Messages: 1693
Registered: September 2005
Location: Moscow
|
Senior Member |
|
|
please, place your scripts in /etc/sysconfig/vz-scripts, not
/usr/lib/vzctl/scripts...
Kirill
>>yes. see scripts in /etc/sysconfig/vz-scripts
>
>
> I placed the two scripts (see below), but they aren't executed :-( The scripts
> should mount/umount the bind-mounts.
>
> gs scripts # ls -l /usr/lib/vzctl/scripts/
> total 32
> -rwxr-xr-x 1 root root 69 Jan 5 19:38 2001.mount
> -rwxr-xr-x 1 root root 47 Jan 5 19:39 2001.umount
> -rwxr-xr-x 1 root root 1522 Jan 4 01:05 vps-create
> -rwxr-xr-x 1 root root 4037 Jan 4 01:05 vps-functions
> -rwxr-xr-x 1 root root 1354 Jan 4 01:05 vps-net_add
> -rwxr-xr-x 1 root root 1127 Jan 4 01:05 vps-net_del
> -rwxr-xr-x 1 root root 2308 Jan 4 01:05 vps-postcreate
> -rwxr-xr-x 1 root root 785 Jan 4 01:05 vps-stop
> gs scripts # vzctl --verbose start 2001
> Unable to open /usr/lib/vzctl/modules/: No such file or directory
> Starting VPS ...
> Running: /usr/sbin/vzquota show 2001
> Running: /usr/sbin/vzquota on 2001 -r 0 -b 1048676 -B 1153534 -i 200100 -I
> 220100 -e 0 -n 0 -s 0
> Mounting root: /vz/root/2001 /vz/private/2001
> VPS is mounted
> Running: /usr/sbin/vzquota stat 2001 -f
> Running: vzquota setlimit 2001 -b 1048576 -B 1153434 -i 200000 -I 220000 -e 0
> -n 0
> Adding IP address(es): 192.168.39.21
> Running: /usr/lib/vzctl/scripts/vps-net_add
> Running VPS script: /etc/vz/dists/scripts/gentoo-add_ip.sh
> Setting CPU units: 1000
> Set hostname: ovz01
> Running VPS script: /etc/vz/dists/scripts/gentoo-set_hostname.sh
> VPS start in progress...
> gs scripts # mount
> /dev/hda1 on / type ext3 (rw,noatime)
> proc on /proc type proc (rw)
> sysfs on /sys type sysfs (rw)
> udev on /dev type tmpfs (rw,nosuid)
> devpts on /dev/pts type devpts (rw)
> /dev/hdb1 on /tftproot type ext3 (rw,noatime)
> shm on /dev/shm type tmpfs (rw,noexec,nosuid,nodev)
> 192.168.39.1:/home/lmeier on /root/lmeier type nfs (rw,addr=192.168.39.1)
> gs scripts #
>
>
>>>>Please note, on 2.6.8 kernel bind mount is still rw :(
>>>
>>>o.k.
>>>
>>>
>>>>Kirill
>>>>
>>>>
>>>>>Am Donnerstag, 5. Januar 2006 16:27 schrieb Kirill Korotaev:
>>>>>
>>>>>>can you give me an access? it will be much faster...
>>>>>>if so, send me a private mail with login please.
>>>>>
>>>>>Sorry, thats not possible ...
>>>>>
>>>>>
>>>>>>Kirill
>>>>>>
>>>>>>
>>>>>>>Am Donnerstag, 5. Januar 2006 15:25 schrieb Kirill Korotaev:
>>>>>>>
>>>>>>>>>The network issue is partly solved: I do not use the gentoo net.lo
>>>>>>>>>script for net.venet0 anymore, instead I setup the interfaces venet0
>>>>>>>>>and venet0:0 with the attached workaround-script.
>>>>>>>>>
>>>>>>>>>But, how do I bind-mount directories from to host to the VPS, e.g.
>>>>>>>>>to use /usr/portage in the VPD too. If I try to (on host)
>>>>>>>>>
>>>>>>>>>gs ~ # mount /usr/portage /vz/private/2001/usr/portage/ -o bind,ro
>>>>>>>>
>>>>>>>>try /vz/root/2001/usr/portage after VPS is mounted.
>>>>>>>
>>>>>>>does not solve the problem.
>>>>>>>
>>>>>>>on host:
>>>>>>>
>>>>>>>gs ~ # vzctl mount 2001
>>>>>>>VPS is mounted
>>>>>>>gs ~ # mount /usr/portage /vz/root/2001/usr/portage -o bind,ro
>>>>>>>gs ~ # mount
>>>>>>>/dev/hda1 on / type ext3 (rw,noatime)
>>>>>>>proc on /proc type proc (rw)
>>>>>>>sysfs on /sys type sysfs (rw)
>>>>>>>udev on /dev type tmpfs (rw,nosuid)
>>>>>>>devpts on /dev/pts type devpts (rw)
>>>>>>>/dev/hdb1 on /tftproot type ext3 (rw,noatime)
>>>>>>>shm on /dev/shm type tmpfs (rw,noexec,nosuid,nodev)
>>>>>>>192.168.39.1:/home/lmeier on /root/lmeier type nfs
>>>>>>>(rw,addr=192.168.39.1) none on proc type proc (rw)
>>>>>>>/usr/portage on /vz/root/2001/usr/portage type none (ro,bind)
>>>>>>>gs ~ #
>>>>>>>
>>>>>>>in the VPS:
>>>>>>>
>>>>>>>ovz01 usr # ls
>>>>>>>bin include libexec portage sbin src
>>>>>>>i386-pc-linux-gnu lib local portage.vps share tmp
>>>>>>>ovz01 usr # ls -l portage
>>>>>>>total 0
>>>>>>>ovz01 usr #
>>>>>>>
>>>>>>>
>>>>>>>>>I get
>>>>>>>>>
>>>>>>>>>ovz01 usr # ls
>>>>>>>>>bin i386-pc-linux-gnu include lib libexec local portage sbin
>>>>>>>>>share src tmp
>>>>>>>>>ovz01 usr # ls portage
>>>>>>>>>ovz01 usr #
>>>>>>>>>
>>>>>>>>>on the VPS ovz01. Whats wrong?
>>>>>>>>>
>>>>>>>>>- Wilhelm
>>>>>>>>>
>>>>>>>>>Am Mittwoch, 4. Januar 2006 17:28 schrieb Wilhelm Meier:
>>>>>>>>>
>>>>>>>>>>Am Mittwoch, 4. Januar 2006 09:51 schrieb Kirill Korotaev:
>>>>>>>>>>
>>>>>>>>>>>so you run Gentoo inside VPS yeah?
>>>>>>>>>>
>>>>>>>>>>Well, I try to ...
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>the problem seems to be in your initscripts, which didn't mount
>>>>>>>>>>>/proc on VPS start and didn't create /dev/ptyX entries for
>>>>>>>>>>>terminal devices. Looks like the only process in your VPS is
>>>>>>>>>>>init, strange...
>>>>>>>>>>
>>>>>>>>>>I created the needed /dev/ttyp0 and /dev/ttyp0 by hand
>>>>>>>>>>in /vz/private/<id>/dev/ and mount also /proc by hand. Then it is
>>>>>>>>>>possible to enter the gentoo-VPS:
>>>>>>>>>>
>>>>>>>>>>gs ~ # vzctl enter 2001
>>>>>>>>>>entered into VPS 2001
>>>>>>>>>>ovz01 / # ps aux
>>>>>>>>>>USER PID %CPU %MEM VSZ RSS TTY STAT START TIME
>>>>>>>>>>COMMAND root 1 0.0 0.1 1368 480 ? Ss 17:06
>>>>>>>>>>0:00 ini root 14644 0.0 0.3 1740 780 ? Ss 17:14
>>>>>>>>>>0:00 vzctl: ttyp0 root 15669 0.5 0.5 2244 1288 ttyp0 Ss
>>>>>>>>>>17:14 0:00 bash -i root 15671 0.0 0.3 2376 836 ttyp0
>>>>>>>>>>R+ 17:14 0:00 ps aux ovz01 / #
>>>>>>>>>>
>>>>>>>>>>I also copied /etc/init.d/net.lo to the VPS and some additional
>>>>>>>>>>scripts, which are apparently missing.
>>>>>>>>>>But in the gentoo-VPS I get still:
>>>>>>>>>>
>>>>>>>>>>ovz01 / # /etc/init.d/net.venet0 start
>>>>>>>>>>* Starting
>>>>>>>>>>* no interface module has been loaded
>>>>>>>>>>ovz01 / #
>>>>>>>>>>ovz01 / # /sbin/ifconfig -a
>>>>>>>>>>lo Link encap:Local Loopback
>>>>>>>>>> LOOPBACK MTU:16436 Metric:1
>>>>>>>>>> RX packets:38 errors:0 dropped:0 overruns:0 frame:0
>>>>>>>>>> TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
>>>>>>>>>> collisions:0 txqueuelen:0
>>>>>>>>>> RX bytes:2660 (2.5 Kb) TX bytes:2660 (2.5 Kb)
>>>>>>>>>>
>>>>>>>>>>venet0 Link encap:UNSPEC HWaddr
>>>>>>>>>>00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>>>>>>>>>> BROADCAST POINTOPOINT NOARP MTU:1500 Metric:1
>>>>>>>>>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>>>>>>>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>>>>>>>> collisions:0 txqueuelen:0
>>>>>>>>>> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>>>>>>>>>>
>>>>>>>>>>ovz01 / #
>>>>>>>>>>
>>>>>>>>>>If I try
...
|
|
|
|
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Fri Jul 12 17:36:28 GMT 2024
Total time taken to generate the page: 0.02381 seconds
|
OpenVZ Forum
Members
Search
Help
Register
Login
Home
