Kernel Panic OpenVZ install failed No module it8213
Trying to install openvz and got this error. Transaction Test Succeeded Running Transaction Installing: ovzkernel ####################### [ 1/21] WARNING: No module it8213 found for kernel 2.6.18-53.1.13.el5.028stab053.10, continuing anyway error: %post(ovzkernel-2.6.18-53.1.13.el5.028stab053.10.i686) scriptlet failed, signal 2 Thanks
Re: OpenVZ install failed No module it8213
when reboot the server there is kernel panic. I have attached the screenshot of kernel panic. Thanks
We are running core2quad/8gig ram with centos 5.x Installed the enterprise kernel for more then 4gig support. #yum install ovzkernel-enterpise But when I rebooted it never came up. So we booted with standard openvz kernel and its up now. #uname -a Linux localhost 2.6.18-53.1.6.el5.028stab053.6 #1 SMP Mon Feb 11 20:14:28 MSK 2008 i686 i686 i386 GNU/Linux But now it's showing only 4gig [root@localhost ~]# free -m total used free shared buffers cached Mem: 3285 606 2678 0 53 410 -/+ buffers/cache: 142 3142 Swap: 16002 0 16002 This is the Grub.conf Default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-53.1.13.el5.028stab053.10PAE) root (hd0,0) kernel /vmlinuz-2.6.18-53.1.13.el5.028stab053.10PAE ro root=LABEL=/ initrd /initrd-2.6.18-53.1.13.el5.028stab053.10PAE.img title CentOS (2.6.18-53.1.6.el5.028stab053.6) root (hd0,0) kernel /vmlinuz-2.6.18-53.1.6.el5.028stab053.6 ro root=LABEL=/ initrd /initrd-2.6.18-53.1.6.el5.028stab053.6.img title CentOS (2.6.18-53.el5PAE) root (hd0,0) kernel /vmlinuz-2.6.18-53.el5PAE ro root=LABEL=/ initrd /initrd-2.6.18-53.el5PAE.img Why server goes down when we boot PAE kernel. Any suggestions how can we load the PAE kernel and make it work? Thanks
Re: Kernel Panic OpenVZ install failed No module it8213
Hello, 1. Did you install 2.6.18-53.1.6.el5.028stab053.6 kernel via rpm? If not could you possibly show us config file for this kernel? Did you get the same error with this kernel? I mean "No module it8213 found". 2. Could you possibly test your memory with memtest86+ if it is possible. http://wiki.openvz.org/Hardware_testing Thank You!
Hello, some more questions, please. 1. have you got any messages from the PAE 028stab53.10 kernel during it's boot time? Does it never boot? 2. ovzkernel-2.6.18-53.1.13.el5.028stab053.10.i686 boots normally but from time to time there is kernel panic. Could you possibly provide us with more information may be via serial console or netconsole.
I installed kernel using yum. After I installed PAE kernel and modified grub.conf bootloader option. It never comes up. Now it gives kernel panic. I have attached file for kernel panic. PAE kernel never comes up. I can try asking datacenter to load the kernel with standard ovzkernel. Do you want me to send you SSH login? maratrus wrote on Mon, 21 April 2008 07:51 Hello, some more questions, please. 1. have you got any messages from the PAE 028stab53.10 kernel during it's boot time? Does it never boot? 2. ovzkernel-2.6.18-53.1.13.el5.028stab053.10.i686 boots normally but from time to time there is kernel panic. Could you possibly provide us with more information may be via serial console or netconsole.
Hello, Quote: I installed kernel using yum. After I installed PAE kernel and modified grub.conf bootloader option. It never comes up. Now it gives kernel panic. I have attached file for kernel panic. PAE kernel never comes up. I can try asking datacenter to load the kernel with standard ovzkernel. I'm sorry but I didn't catch you. 1. Did you try to install only PAE kernel? What kernels and how did you try to install it (the exact versions, please)? 2. What does it mean? Quote: It never comes up. Now it gives kernel panic. Does it give kernel panic during the boot time? 3. You didn't answer the following question. Quote: Did you get the same error with 2.6.18-53.1.6.el5.028stab053.6 kernel? I mean "No module it8213 found" 4.Could you possibly test your memory with memtest86+ if it is possible. Quote: Do you want me to send you SSH login? Yes, if it is possible.
1. yum install vzkernel-enterpirse 2. Server did not boot after I modified the boot sequence 3. Yes I got same error of kernel panic in both the kernel. 4. Can memtest be run from ssh or I have to make bootable iso? 5. Please provide me your email id or any other way to send you the login details. This is second time I got kernel panic. I got this panic 2 months before also and I was told it's listed in bugzilla. Thanks
Hi, Quote: 1. yum install vzkernel-enterpirse 1. Ok Quote: 2. Server did not boot after I modified the boot sequence 2. How did you modify boot sequence? Quote: 3. Yes I got same error of kernel panic in both the kernel. 3. I meant "No module it8213 found" error Quote: 4. Can memtest be run from ssh or I have to make bootable iso? http://wiki.openvz.org/Hardware_testing Quote: Usage To test your system for faulty RAM, install either memtest and reboot into it. Run it for at least a few hours (at least 2-3 iterations). If there will be even a single error reported, you have to change your RAM chips (or, if your system is overclocked, downclock it to normal speed). Quote: This is second time I got kernel panic. I got this panic 2 months before also and I was told it's listed in bugzilla. You'd better provide developers with more information in bugzilla ticket if you've faced with this problem another time. Please do it!!!
Hello After installing the kernel I edited /etc/grub.conf Set PAE as default booting kernel. Yes No module it8213 found error was in both standard and enterprise ovzkernel. The bugzilla and last thread is http://bugzilla.openvz.org/show_bug.cgi?id=844 http://forum.openvz.org/index.php?t=msg&th=5630& I have one server up and running somehow. If you want to have access for it to test these bugs let me know how to send the logins. Thanks
Hi, 1. Please try to pass memtest86+. It might be important. 2. If you have the same situation like it was 2 month ago, you should fill your bugzilla ticket it also might be very helpful. 3. Try to show us the full kernel panic message. I think that pictures are not sufficient. Some information are still beyond us. 4. To be more honest you can compile your own kernel (RHEL5 based) with PATA_IT8213 module enable. http://wiki.openvz.org/Download/kernel/rhel5/028stab053.10 http://download.openvz.org/kernel/branches/rhel5-2.6.18/028s tab053.10/ovzkernel-2.6.18-53.1.13.el5.028stab053.10.src.rpm http://download.openvz.org/kernel/branches/rhel5-2.6.18/028s tab053.10/configs/kernel-2.6.18-i686-PAE.config.ovz
We rebooted the server with PAE and I don't know how come server is booted to PAE kernel this time. STRANGE!!!!! I can see 8gig RAM in server. So I believe now memtest is not needed. I will post in bugzilla this error. How can I show you kernel panic? I believe I have taken screenshot all the time it caused error. What is the specific info you looking for let me know. Let me know if you want me to post some info as server is up now maybe that could help you guys to find a fix for it. Thanks maratrus wrote on Mon, 21 April 2008 10:11 Hi, 1. Please try to pass memtest86+. It might be important. 2. If you have the same situation like it was 2 month ago, you should fill your bugzilla ticket it also might be very helpful. 3. Try to show us the full kernel panic message. I think that pictures are not sufficient. Some information are still beyond us. 4. To be more honest you can compile your own kernel (RHEL5 based) with PATA_IT8213 module enable. http://wiki.openvz.org/Download/kernel/rhel5/028stab053.10 http://download.openvz.org/kernel/branches/rhel5-2.6.18/028s tab053.10/ovzkernel-2.6.18-53.1.13.el5.028stab053.10.src.rpm http://download.openvz.org/kernel/branches/rhel5-2.6.18/028s tab053.10/configs/kernel-2.6.18-i686-PAE.config.ovz