Hi I am following the instructions on Openvz website for installing openvz on ubuntu 7.10 which is a Debian based system. However, at the 'aptitude install ' step I get the error msg ' ovzkernel-2.6.9 not found'. Any help is appreciated Thanks Amba Add to your "/etc/apt/sources.list" deb http://debian.systs.org/debian sarge openvz and get the new package lists # apt-get update [edit<http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit&section=3> ] precompiled kernel images at debian.systs.org (dso) The kernel-images on debian.systs.org (dso) use the same kernel-config taken from OpenVZ. (most kernel-modules are built-in!) If there is more than one CPU available (or a CPU with hyperthreading), use the kernel-smp deb. If there is more than 4 Gb of RAM available, use the kernel-enterprise deb. Otherwise, use the plain kernel deb (kernel). *Kernel flavors list* Kernel type Description Hardware Use case - uniprocessor up to 4GB of RAM -smp symmetric multiprocessor up to 4 GB of RAM 10-20 VPSs -entnosplit SMP + PAE support up to 64 GB of RAM 10-30 VPSs -enterprise SMP + PAE support + 4/4GB split up to 64 GB of RAM >20-30 VPSs kernel-image: i368 and amd64 ovzkernel-2.6.9 ovzkernel-2.6.9-smp kernel-image: i386 only: ovzkernel-2.6.9-enterprise ovzkernel-2.6.9-entnosplit OpenVZ tool(s) for i386 and amd64 vzctl vzquota vzprocps vzdump template(s) for i368 and amd64 : Debian 3.1 Minimal vzctl-ostmpl-debian [edit<http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit&section=4> ] installing the kernel-images, toolset and debian-os-template Example: install the stable OpenVZ kernel, tools and Debian OS Template # aptitude install ovzkernel-2.6.9 vzctl vzquota vzdump vzctl-ostmpl-debian
Re: Question on openvz install on ubuntu
debian.systs.org doesn't have the 2.6.9 kernels anymore. Try ovzkernel-2.6.18. On Mon, Dec 10, 2007 at 05:59:47PM -0800, Amba Giri wrote: > Hi > > I am following the instructions on Openvz website for installing openvz on > ubuntu 7.10 which is a Debian based system. > However, at the 'aptitude install ' step I get the error msg ' > ovzkernel-2.6.9 not found'. > > Any help is appreciated > Thanks > Amba > > > Add to your "/etc/apt/sources.list" > > deb http://debian.systs.org/debian sarge openvz -- E Frank Ball efball@efball.com
I guess that Ubuntu 7.10 corresponds to Debian Etch, so you are using the wrong part of the instruction. You should look at http://wiki.openvz.org/Installation_on_Debian#precompiled_kernel_images_at_debian.systs.org And yes, the page is organized badly, I would suggest moving "building your own kernel in a debian way" to a separate article, and maybe even provide separate articles for Sarge and Etch. Can somebody work on it? Amba Giri wrote: > Hi > > I am following the instructions on Openvz website for installing > openvz on ubuntu 7.10 which is a Debian based system. > However, at the 'aptitude install ' step I get the error msg > 'ovzkernel-2.6.9 not found'. > > Any help is appreciated > Thanks > Amba > > > Add to your "/etc/apt/sources.list" > > deb http://debian.systs.org/debian sarge openvz > > > and get the new package lists > > # apt-get update > > > > [edit > <http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit&section=3>] > precompiled kernel images at debian.systs.org > <http://debian.systs.org> (dso) > > The kernel-images on debian.systs.org <http://debian.systs.org> (dso) > use the same kernel-config taken from OpenVZ. (most kernel-modules are > built-in!) > > If there is more than one CPU available (or a CPU with > hyperthreading), use the kernel-smp deb. If there is more than 4 Gb of > RAM available, use the kernel-enterprise deb. Otherwise, use the plain > kernel deb (kernel). > > > *Kernel flavors list* > Kernel type Description Hardware Use case > - uniprocessor up to 4GB of RAM > -smp symmetric multiprocessor up to 4 GB of RAM 10-20 VPSs > -entnosplit SMP + PAE support up to 64 GB of RAM 10-30 VPSs > -enterprise SMP + PAE support + 4/4GB split up to 64 GB of RAM > >20-30 VPSs > > kernel-image: i368 and amd64 > > ovzkernel-2.6.9 > ovzkernel-2.6.9-smp > > > kernel-image: i386 only: > > ovzkernel-2.6.9-enterprise > ovzkernel-2.6.9-entnosplit > > > OpenVZ tool(s) for i386 and amd64 > > vzctl > vzquota > vzprocps > vzdump > > > template(s) for i368 and amd64 : Debian 3.1 Minimal > > vzctl-ostmpl-debian > > > > [edit > <http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit&section=4>] > installing the kernel-images, toolset and debian-os-template > > Example: install the stable OpenVZ kernel, tools and Debian OS Template > > # aptitude install ovzkernel-2.6.9 vzctl vzquota vzdump vzctl-ostmpl-debian > > > > > ------------------------------------------------------------------------ >
Hi, Am Di, 11.12.2007, 17:43, schrieb Kir Kolyshkin: > [...] provide separate articles for Sarge and Etch. Can somebody work on it? I' ll do it ;-) Regards, Thorsten
Kir Thanks for your answer. I am now running into the following problem: At the step: #sudo wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - | apt-key add - gpg: no writable keyring found: eof gpg: error reading '-': general error gpg: import from '-' failed: general error Amba On 12/11/07, Kir Kolyshkin <kir@openvz.org> wrote: > > I guess that Ubuntu 7.10 corresponds to Debian Etch, so you are using > the wrong part of the instruction. > > You should look at > > http://wiki.openvz.org/Installation_on_Debian#precompiled_kernel_images_at_debian.systs.org > > And yes, the page is organized badly, I would suggest moving "building > your own kernel in a debian way" to a separate article, and maybe even > provide separate articles for Sarge and Etch. Can somebody work on it? > > Amba Giri wrote: > > Hi > > > > I am following the instructions on Openvz website for installing > > openvz on ubuntu 7.10 which is a Debian based system. > > However, at the 'aptitude install ' step I get the error msg > > 'ovzkernel-2.6.9 not found'. > > > > Any help is appreciated > > Thanks > > Amba > > > > > > Add to your "/etc/apt/sources.list" > > > > deb http://debian.systs.org/debian sarge openvz > > > > > > and get the new package lists > > > > # apt-get update > > > > > > > > [edit > > < > http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit&section=3 > >] > > precompiled kernel images at debian.systs.org > > <http://debian.systs.org> (dso) > > > > The kernel-images on debian.systs.org <http://debian.systs.org> (dso) > > use the same kernel-config taken from OpenVZ. (most kernel-modules are > > built-in!) > > > > If there is more than one CPU available (or a CPU with > > hyperthreading), use the kernel-smp deb. If there is more than 4 Gb of > > RAM available, use the kernel-enterprise deb. Otherwise, use the plain > > kernel deb (kernel). > > > > > > *Kernel flavors list* > > Kernel type Description Hardware Use case > > - uniprocessor up to 4GB of RAM > > -smp symmetric multiprocessor up to 4 GB of RAM 10-20 VPSs > > -entnosplit SMP + PAE support up to 64 GB of RAM 10-30 VPSs > > -enterprise SMP + PAE support + 4/4GB split up to 64 GB of RAM > > >20-30 VPSs > > > > kernel-image: i368 and amd64 > > > > ovzkernel-2.6.9 > > ovzkernel-2.6.9-smp > > > > > > kernel-image: i386 only: > > > > ovzkernel-2.6.9-enterprise > > ovzkernel-2.6.9-entnosplit > > > > > > OpenVZ tool(s) for i386 and amd64 > > > > vzctl > > vzquota > > vzprocps > > vzdump > > > > > > template(s) for i368 and amd64 : Debian 3.1 Minimal > > > > vzctl-ostmpl-debian > > > > > > > > [edit > > < > http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit&section=4 > >] > > installing the kernel-images, toolset and debian-os-template > > > > Example: install the stable OpenVZ kernel, tools and Debian OS Template > > > > # aptitude install ovzkernel-2.6.9 vzctl vzquota vzdump > vzctl-ostmpl-debian > > > > > > > > > > ------------------------------------------------------------------------ > >
On 12/11/07, Amba Giri <giri.amba@gmail.com> wrote: > > Kir > > Thanks for your answer. I am now running into the following problem: > > At the step: > #sudo wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - | > apt-key add - > > gpg: no writable keyring found: eof > gpg: error reading '-': general error > gpg: import from '-' failed: general error > > Amba > > > > On 12/11/07, Kir Kolyshkin <kir@openvz.org> wrote: > > > > I guess that Ubuntu 7.10 corresponds to Debian Etch, so you are using > > the wrong part of the instruction. > > > > You should look at > > http://wiki.openvz.org/Installation_on_Debian#precompiled_kernel_images_at_debian.systs.org > > > > > > And yes, the page is organized badly, I would suggest moving "building > > your own kernel in a debian way" to a separate article, and maybe even > > provide separate articles for Sarge and Etch. Can somebody work on it? > > > > Amba Giri wrote: > > > Hi > > > > > > I am following the instructions on Openvz website for installing > > > openvz on ubuntu 7.10 which is a Debian based system. > > > However, at the 'aptitude install ' step I get the error msg > > > 'ovzkernel-2.6.9 not found'. > > > > > > Any help is appreciated > > > Thanks > > > Amba > > > > > > > > > Add to your "/etc/apt/sources.list" > > > > > > deb http://debian.systs.org/debian sarge openvz > > > > > > > > > and get the new package lists > > > > > > # apt-get update > > > > > > > > > > > > [edit > > > <http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit&section=3 > > >] > > > precompiled kernel images at debian.systs.org > > > < http://debian.systs.org> (dso) > > > > > > The kernel-images on debian.systs.org <http://debian.systs.org> (dso) > > > use the same kernel-config taken from OpenVZ. (most kernel-modules are > > > > > built-in!) > > > > > > If there is more than one CPU available (or a CPU with > > > hyperthreading), use the kernel-smp deb. If there is more than 4 Gb of > > > RAM available, use the kernel-enterprise deb. Otherwise, use the plain > > > > > kernel deb (kernel). > > > > > > > > > *Kernel flavors list* > > > Kernel type Description Hardware Use case > > > - uniprocessor up to 4GB of RAM > > > -smp symmetric multiprocessor up to 4 GB of RAM 10-20 > > VPSs > > > -entnosplit SMP + PAE support up to 64 GB of RAM 10-30 > > VPSs > > > -enterprise SMP + PAE support + 4/4GB split up to 64 GB of > > RAM > > > >20-30 VPSs > > > > > > kernel-image: i368 and amd64 > > > > > > ovzkernel-2.6.9 > > > ovzkernel-2.6.9-smp > > > > > > > > > kernel-image: i386 only: > > > > > > ovzkernel-2.6.9-enterprise > > > ovzkernel-2.6.9-entnosplit > > > > > > > > > OpenVZ tool(s) for i386 and amd64 > > > > > > vzctl > > > vzquota > > > vzprocps > > > vzdump > > > > > > > > > template(s) for i368 and amd64 : Debian 3.1 Minimal > > > > > > vzctl-ostmpl-debian > > > > > > > > > > > > [edit > > > < > > http://wiki.openvz.org/w/index.php?title=Installation_on_Debian&action=edit&section=4>] > > > > > installing the kernel-images, toolset and debian-os-template > > > > > > Example: install the stable OpenVZ kernel, tools and Debian OS > > Template > > > > > > # aptitude install ovzkernel-2.6.9 vzctl vzquota vzdump > > vzctl-ostmpl-debian > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------ > > >
Hi Amba, for ubunutu, you should use: # wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - | sudo apt-key add - Bye, Thorsten
Thanks Thorsten. Unfortuntely, I am still running into the following problem On reboot, iget the error msg 'Statrting OpenVZ: failed to load module vzmon..failed' I also did a 'sudo apt-get install vzctl vzquota vzdump vzctl-ostmpl-debian' but that did not fix above problem. Also, vzctl-ostmpl-debian could not be found. Thanks again for your assistance Amba On 12/11/07, Thorsten Schifferdecker <tsd@debian.systs.org> wrote: > > Hi Amba, > > for ubunutu, you should use: > > # wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - | > sudo apt-key add - > > Bye, > Thorsten
Can you please post the ubunutu version is used and what linux kernels is booted. Amba Giri wrote: > Thanks Thorsten. Unfortuntely, I am still running into the following problem > > On reboot, iget the error msg 'Statrting OpenVZ: failed to load module > vzmon..failed' > > I also did a 'sudo apt-get install vzctl vzquota vzdump > vzctl-ostmpl-debian' but that did not fix above problem. Also, > vzctl-ostmpl-debian could not be found. > > Thanks again for your assistance > Amba > > > > On 12/11/07, *Thorsten Schifferdecker* <tsd@debian.systs.org > <mailto:tsd@debian.systs.org>> wrote: > > Hi Amba, > > for ubunutu, you should use: > > # wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - | > sudo apt-key add - > > Bye, > Thorsten > _______________________________________________ > Users mailing list > Users@openvz.org <mailto:Users@openvz.org> > https://openvz.org/mailman/listinfo/users > > > > ------------------------------------------------------------------------ >
Thorsten, The Ubuntu version is 7.10 and the booted linux kernel is 2.6.22-14-server. Thanks Amba On Dec 11, 2007 11:18 PM, Thorsten Schifferdecker <tsd@debian.systs.org> wrote: > Can you please post the ubunutu version is used and what linux kernels > is booted. > > Amba Giri wrote: > > Thanks Thorsten. Unfortuntely, I am still running into the following > problem > > > > On reboot, iget the error msg 'Statrting OpenVZ: failed to load module > > vzmon..failed' > > > > I also did a 'sudo apt-get install vzctl vzquota vzdump > > vzctl-ostmpl-debian' but that did not fix above problem. Also, > > vzctl-ostmpl-debian could not be found. > > > > Thanks again for your assistance > > Amba > > > > > > > > On 12/11/07, *Thorsten Schifferdecker* <tsd@debian.systs.org > > <mailto:tsd@debian.systs.org>> wrote: > > > > Hi Amba, > > > > for ubunutu, you should use: > > > > # wget http://debian.systs.org/dso_archiv_signing_key.asc -q -O - | > > sudo apt-key add - > > > > Bye, > > Thorsten > > _______________________________________________ > > Users mailing list > > Users@openvz.org <mailto:Users@openvz.org> > > https://openvz.org/mailman/listinfo/users > > > > > > > > ------------------------------------------------------------------------ > >
Re: Question on openvz install on ubuntu 7.10
Hi Amba, ok, i've supposed that, the error occured while a non-OpenVZ kernel is booted: ubunutu shipped a kernel version 2.6.22-... and the (stable) OpenVZ Kernel at debian.systs.org is a 2.6.18, so the first kernel to boot is the 2.6.22 and than the "older" 2.6.18 OpenVZ kernel. So please inspect your boot loader config, eg. grub (-> edit /boot/grub/menu.list ) and place the openvz kernel on first boot order and reboot the machine. and voila another OpenVZ node is on the way :-) Bye, Thorsten Amba Giri wrote: > Thorsten, > > The Ubuntu version is 7.10 and the booted linux kernel is > 2.6.22-14-server. > > Thanks > Amba > > On Dec 11, 2007 11:18 PM, Thorsten Schifferdecker <tsd@debian.systs.org > <mailto:tsd@debian.systs.org>> wrote: > > Can you please post the ubunutu version is used and what linux kernels > is booted. > > Amba Giri wrote: > > Thanks Thorsten. Unfortuntely, I am still running into the > following problem > > > > On reboot, iget the error msg 'Statrting OpenVZ: failed to load > module > > vzmon..failed' > >
Thanks Thorsten - that did fix the problem. :) Thanks a lot! Amba On Dec 12, 2007 2:06 PM, Thorsten Schifferdecker <tsd@debian.systs.org> wrote: > Hi Amba, > > ok, i've supposed that, the error occured while a non-OpenVZ kernel is > booted: > > ubunutu shipped a kernel version 2.6.22-... and the (stable) OpenVZ > Kernel at debian.systs.org is a 2.6.18, so the first kernel to boot is > the 2.6.22 and than the "older" 2.6.18 OpenVZ kernel. > > So please inspect your boot loader config, eg. grub (-> edit > /boot/grub/menu.list ) and place the openvz kernel on first boot order > and reboot the machine. > > and voila another OpenVZ node is on the way :-) > > Bye, > Thorsten > > Amba Giri wrote: > > Thorsten, > > > > The Ubuntu version is 7.10 and the booted linux kernel is > > 2.6.22-14-server. > > > > Thanks > > Amba > > > > On Dec 11, 2007 11:18 PM, Thorsten Schifferdecker <tsd@debian.systs.org > > <mailto:tsd@debian.systs.org>> wrote: > > > > Can you please post the ubunutu version is used and what linux > kernels > > is booted. > > > > Amba Giri wrote: > > > Thanks Thorsten. Unfortuntely, I am still running into the > > following problem > > > > > > On reboot, iget the error msg 'Statrting OpenVZ: failed to load > > module > > > vzmon..failed' > > >